PDA

View Full Version : FS/FT Custom DC level 5 10



mtx+psi-awsome
05-08-2013, 07:35 PM
Item(s) for Sale:

CUSTOM DC audio level 5 10"

Item(s) Description/Condition:

The sub itself weighs over 75 pounds, it has a dual 2 ohm 3.5" coil. It has a dc level 5 Motor on it so it has a custom mounting braket since the motor is bigger than the 10" basket. its got 5 spiders handles 4k rms probably more. I only had 2k going to it and it laughed at the power. has a very high roll surround and hudge very strong dustcap dual tinsel leads and direct connect 8 gauge wiring. This sub is a monster!


Price:


550+ shipping will trade for a beefy 15 DUAL 2 OR DUAL .5 ONLY

Shipping and Miscellaneous Item Information:
on Buyer



Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Jes 42
05-08-2013, 07:37 PM
Dtrom ;

04murdalanche
05-08-2013, 07:50 PM
Fuuuck. That's so beautiful. Glws

fosgatefeind
05-08-2013, 07:51 PM
this looks like thors lvl 5 10s. if it is a true lvl 6 im interested

Foulplay
05-08-2013, 07:53 PM
Wish it was a 12

mtx+psi-awsome
05-08-2013, 07:55 PM
this looks like thors lvl 5 10s. if it is a true lvl 6 im interested

Im almost Positive its a older level 6

---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------


Fuuuck. That's so beautiful. Glws

Thanks! shes beautiful!

fosgatefeind
05-08-2013, 08:05 PM
Im almost Positive its a older level 6

---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------



Thanks! shes beautiful!

yea and the m1 lvl 6s had to have a plate made for the 12" baskets. im not saying your lieing but i don't thin k its a lvl 6

mtx+psi-awsome
05-08-2013, 08:08 PM
yea and the m1 lvl 6s had to have a plate made for the 12" baskets. im not saying your lieing but i don't thin k its a lvl 6

Ya I just changed it to the lvl 5 motor THANKS! sorry about that guys!

fosgatefeind
05-08-2013, 08:10 PM
no problem man. id be interested but not at that price because i know wht you paid :)

mtx+psi-awsome
05-08-2013, 08:12 PM
no problem man. id be interested but not at that price because i know wht you paid :)

That's why theres that whole best offer thing lol I did a lot of trading for this baby

fosgatefeind
05-08-2013, 08:14 PM
what are you interested in trades

mtx+psi-awsome
05-08-2013, 08:17 PM
what are you interested in trades

Im looking for a beefy 15 open to offers though!

fosgatefeind
05-08-2013, 08:31 PM
well i have a motor and basket you might be interested in pm me
http://www.caraudio.com/forums/miscellaneous-car-audio-classifieds/574570-tc-5200-motor-qca-ring-4hp-good-ness.html

mtx+psi-awsome
05-08-2013, 11:15 PM
come on guys throw me an offer! the worst I can say is no

Zeuslicious
05-09-2013, 02:48 AM
Beastly Motor For Sure! Good Luck OP!

mtx+psi-awsome
05-09-2013, 11:38 AM
550 shipped!!! that's a steal if im paying the shipping! I need this thing gone want to get a 15 soon!

DDtC
05-09-2013, 11:48 AM
If itsa the first level 5 thats not a 4 inch coil. Its a 3 inch, m2s have 3.5 inch

mtx+psi-awsome
05-09-2013, 12:35 PM
If itsa the first level 5 thats not a 4 inch coil. Its a 3 inch, m2s have 3.5 inch

its a 3.5 I just changed the specs, and im sure of that. WILL DO 500 SHIPPED need the $!!!! this sub is well worth it!!!!

DDtC
05-09-2013, 12:41 PM
its a 3.5 I just changed the specs, and im sure of that. WILL DO 500 SHIPPED need the $!!!! this sub is well worth it!!!!

So its a m2? Can we get a pic of the bottom plate?

mtx+psi-awsome
05-09-2013, 01:00 PM
Will get one up later tonight

mtx+psi-awsome
05-09-2013, 01:24 PM
back plate picture now on there throw me an offer!!!

ninos
05-09-2013, 07:42 PM
Its a level 5 3.5" coil i know i had these pairs built i might want this back i have a sick 15" laying around

mtx+psi-awsome
05-09-2013, 08:07 PM
Its a level 5 3.5" coil i know i had these pairs built i might want this back i have a sick 15" laying around

pm sent your way

radwilsons5803
05-10-2013, 12:18 AM
Good guy here too, he got this sub from me and it is a thors. GLWS sale homie

DDtC
05-10-2013, 10:53 AM
That's the m1, 3 inch coil. This is the m2s venting, the one you have is a pole vent.
DC Audio - Level 5 (http://www.dcsoundlab.com/level5.html)

mtx+psi-awsome
05-10-2013, 11:38 AM
That's the m1, 3 inch coil. This is the m2s venting, the one you have is a pole vent.
DC Audio - Level 5 (http://www.dcsoundlab.com/level5.html)

its the 3.5 I spoke to the guy that had them built.

Boomsday
05-10-2013, 11:43 AM
Those are getting around again.lol

rebelfromva
05-10-2013, 12:27 PM
M1 lvl 5 motors use 3" vc

rebelfromva
05-10-2013, 12:29 PM
its the 3.5 I spoke to the guy that had them built.

I almost bought these when they were in VA. They are 3" vc m1 lvl 5 10s

bumpinexploder
05-10-2013, 01:01 PM
clearly a M1 motor with MAYBE stronger soft parts but NOT an m2 as the level 5 m2 uses a 3.5 inch coil like stated before multiple times. i say 400 shipped would be great since you can get a m2 level 5 12 for what your asking for an m1 10.... just saying

mtx+psi-awsome
05-10-2013, 07:05 PM
well I can tell you its a 3.5 like ninos said earlier its a 3.5 coil. and he was the one who had them built.

DDtC
05-10-2013, 07:16 PM
Then it's not a DC level 5 motor cause that is a m1 and the m1 didn't have a 3.5 inch coil, i had one so i would know. So either the guy that had them built got lied to or you have a one of a kind motor.

Moler1129
05-10-2013, 07:54 PM
It's going to me, this tread is closed.

ninos
05-10-2013, 11:48 PM
It is one of a kind lol its a thorshammer bro i know its a 3.5" coil i spoke to a buddy of mine at dc and he even said these arent really considered m1 or m2 ;)

mtx+psi-awsome
05-11-2013, 12:32 AM
Sub is still for sale!!! 500 shipped! Custom beast!m
And thanks ninos!

fosgatefeind
05-11-2013, 10:32 AM
Just to answer all questions on the coil size
http://i1255.photobucket.com/albums/hh639/basssplfeind/A795DA46-7902-4D9A-A5C4-D31435E5EB12-17142-00000B928C0CEF87_zps45d6c81a.jpg from Thor himself

DDtC
05-11-2013, 10:40 AM
It is one of a kind lol its a thorshammer bro i know its a 3.5" coil i spoke to a buddy of mine at dc and he even said these arent really considered m1 or m2 ;)

So are you full of it or just stupid?

mtx+psi-awsome
05-11-2013, 10:56 AM
Sold thread closed!!!

mtx+psi-awsome
05-11-2013, 12:02 PM
buyer backed out sub still for sale! Throw me an offer!

mtx+psi-awsome
05-11-2013, 12:23 PM
Sub still for sale!!!

cal
05-11-2013, 04:43 PM
op ive owned plenty of dc level 5 and never heard of a 3.5 coil on tthe m1 so i did some research and its indeed a dc level 5 m1 and its a 3 hp motor . i do beleave somwbody to nino but thor himseld replied to a dc thread i started on caco ...

---------- Post added at 03:43 PM ---------- Previous post was at 03:43 PM ----------


Just to answer all questions on the coil size
http://i1255.photobucket.com/albums/hh639/basssplfeind/A795DA46-7902-4D9A-A5C4-D31435E5EB12-17142-00000B928C0CEF87_zps45d6c81a.jpg from Thor himself


you beat me to it lol.