PDA

View Full Version : Max Dimensions for Gen 4 Taurus?



SounDrive
04-20-2013, 02:45 PM
Does anyone know the max box dimensions for a '99-'07 Taurus? I'm planning on upgrading from 2 12s to 2 15s if possible. I have a 3/4" MDF trunk floor too. Amps can be mounted on the box or in the corners behind the wheel wells, that's not really a concern for me.

I've seen it done before but the box was a tight fit and I can't seem to get the guy to reply so I can get his box dimensions.

fasfocus00
04-20-2013, 02:52 PM
how about you use a tape measure

NASTY08IMPALA
04-20-2013, 02:53 PM
2 12s r plenty ..2 15 s arent gona work well in that trunk ..mock up a carboard box and tape it together ..thats the best way to find max

NASTY08IMPALA
04-20-2013, 02:55 PM
how about you use a tape measure

Doesnt always work that well depending on trunk opening..its good idea to use n get close the mock one up fron cardboard

SounDrive
04-20-2013, 02:55 PM
how about you use a tape measure

If the box fits through the trunk opening but won't maneuver around to actually fit inside the trunk what's the use?

None. Exactly.

SounDrive
04-20-2013, 02:57 PM
2 12s r plenty ..2 15 s arent gona work well in that trunk ..mock up a carboard box and tape it together ..thats the best way to find max

It should work fine, I've got a 5 foot by 4 foot area to work with, I just have to worry about the trunk opening and actually cramming it in there. As long as it fits and I have about 4-6 inches between the port and the back of the car I'll be good. Subs will be facing up

NASTY08IMPALA
04-20-2013, 03:29 PM
I wouldnt 2 12s is plenty if u kno what ur doin. plus no room for amps batteries etc..jus not a good idea