PDA

View Full Version : SOLD/CLOSED TC Sounds 15" TC1000/EPIC/RL-i/TC2+



ciaonzo
04-14-2013, 08:54 PM
Item(s) for Sale:

Old school US built 15" TC1000/EPIC/RL-i/TC2+, all the same. D4 coils.


Item(s) Description/Condition:

A true unicorn among TC products, ultra rare and ultra SQ. Very highly sought after driver. Dead silent suspension and awesome output capability. Thrives on very little power and easily absorbs more serious power. Check out the specs below. I regret that it has some dings on the cone from loose items during shipment to me. I never let it bother me because I was so tickled to have even found one of these. I tried to capture them in the photos. Still presents very well and operates flawlessly. Moving soon and cutting down a little bit, get it while I'm weak in the brain.

Specs:

Fs - 15.6hz
Qts - .346
Qes - .381
Qms - 3.82
Sd - 320mm dia.
Vas - 393l
Bl - 15.01Tm
Mms - 283g
Cms - 433um/N
SPL - 87.8dB

The TC-1000 is the ideal driver for anyone looking for powerful clean bass with superb quality for either the home or mobile environment. With a standard 135 ounce magnet structure, 2" wide all aluminum 4 layer voice coil, and over 2" of highly linear excursion, this driver simply obliterates the competition. Its innate low distortion quality makes it seemly intended for high fidelity applications, but because of its high efficiency, impressive power handling and class leading displacement, the TC-1000 simply embarrasses retail SPL drivers with motors half its size! It can handle 400 watts of continuous power, but don’t be afraid to feed it 1000 clean watts as the voice coil will harness that power and deliver surprising sound pressure levels.

Advanced FEA Motor System
• Double stacked 1" tall ferrite magnets and bored T-yoke for long throw
• 135oz top grade magnet structure
• Anti-flux modulation copper shorting ring to lower distortion
• Low carbon steel used for the gap plate and t-yoke
• Pole vent for lower distortion and cooling capabilities.

http://web.archive.org/web/20070303212451im_/http://www.tcsounds.com/TC_pics/icons/divide6.gif
Advanced high excursion soft part system

• High excursion 8.0" linear roll poly-cotton spider
• Intergraded woven leads to prevent lead-slap
• 2" diameter, 4-layer aluminum wire voice coil with an anodized aluminum former
• Single or dual 3.7Ω (4 ohm nominal) voice coil configuration
• Lightweight brushed and powder coated aluminum cone
• 1" wide long throw, highly durable NBR surround
• High quality thermal flexible epoxies to ensure longevity
http://web.archive.org/web/20070303212451im_/http://www.tcsounds.com/TC_pics/icons/divide6.gif
Performance

• Effective motor force of 60 Newtons2 per watt (BL2/Re)
• 400 watts continuous power (1200 watts peak)
• 24mm BL XMax (voice coil, one-way)
• 37mm XMech (mechanically limited, one-way)

Price:

$300 shipped, CONUS.


Shipping and Miscellaneous Item Information:

CONUS only, please.


Item Pictures:

http://i704.photobucket.com/albums/ww43/ciaonzo/Misc%20TC/TC100015050_zps070b66c1.jpg (http://s704.photobucket.com/user/ciaonzo/media/Misc%20TC/TC100015050_zps070b66c1.jpg.html)

http://i704.photobucket.com/albums/ww43/ciaonzo/Misc%20TC/TC100015040_zps4c5d2ae5.jpg (http://s704.photobucket.com/user/ciaonzo/media/Misc%20TC/TC100015040_zps4c5d2ae5.jpg.html)

http://i704.photobucket.com/albums/ww43/ciaonzo/Misc%20TC/TC100015044_zps842929fa.jpg (http://s704.photobucket.com/user/ciaonzo/media/Misc%20TC/TC100015044_zps842929fa.jpg.html)

http://i704.photobucket.com/albums/ww43/ciaonzo/Misc%20TC/TC100015032_zps9a0a7dc6.jpg (http://s704.photobucket.com/user/ciaonzo/media/Misc%20TC/TC100015032_zps9a0a7dc6.jpg.html)

http://i704.photobucket.com/albums/ww43/ciaonzo/Misc%20TC/TC100015011_zpsc6a80d08.jpg (http://s704.photobucket.com/user/ciaonzo/media/Misc%20TC/TC100015011_zpsc6a80d08.jpg.html)

http://i704.photobucket.com/albums/ww43/ciaonzo/Misc%20TC/TC100015014_zps42c8f966.jpg (http://s704.photobucket.com/user/ciaonzo/media/Misc%20TC/TC100015014_zps42c8f966.jpg.html)

mat3833
04-14-2013, 09:11 PM
:awesome:

please stop this XD, this would go quite well in my HT. decisions decisions...

Matt

ciaonzo
04-14-2013, 09:55 PM
:awesome:

please stop this XD, this would go quite well in my HT. decisions decisions...

MattYou're all over the place, bro. lol

mat3833
04-14-2013, 09:59 PM
lol, i kno. i wont clutter your thread tho. but this is one sick sub. i have a Tapped Horn in my shed that this thing would destroy in. :-(

Matt

double 07
04-14-2013, 10:07 PM
S E X Y sub......GLWS

blobb454
04-14-2013, 10:20 PM
Very clean looking piece! Glws

ciaonzo
04-14-2013, 10:45 PM
S E X Y sub......GLWS


Very clean looking piece! GlwsThanks, guys!

ciaonzo
04-15-2013, 07:15 PM
Edited...

ciaonzo
04-17-2013, 07:44 AM
Humpday!

ciaonzo
04-18-2013, 07:37 AM
Bump for the early birds.

ciaonzo
04-18-2013, 12:12 PM
you should give it to me so I can dispose of itZOMG, is such creamy smooth bass, though. Loud with low distortions, from low power.

Made my bad day better with that one, lol. Thanks, man.

04murdalanche
04-18-2013, 12:13 PM
holy Fs of 15.. wow:emb:

J31Rob
04-18-2013, 12:16 PM
Looking for any trades my friend?

ciaonzo
04-18-2013, 01:26 PM
holy Fs of 15.. wow:emb:Just keeps diggin', lol.


Looking for any trades my friend?Would love to but I'm preparing for a move and positioning for other purchases, so cash only for now. Really sorry bro, you got some nice shiz.

ciaonzo
04-19-2013, 02:07 PM
Making a big UPS run tomorrow, would love to send this out to someone! Who wants it?

ciaonzo
04-20-2013, 05:37 PM
Finally the weekend...

resko1
04-21-2013, 10:32 AM
Hmmm.

J31Rob
04-21-2013, 10:40 AM
No harm no foul. GLWS!

resko1
04-21-2013, 12:41 PM
No harm no foul. GLWS!
**** man. Where you been hiding jrob? Under a rock?

resko1
04-21-2013, 12:43 PM
Hey shane! Hi!
I know of a 3hp neo 15 with a very special tc aura 1508 cone if that sparks interest.

ciaonzo
04-21-2013, 02:50 PM
Hey shane! Hi!
I know of a 3hp neo 15 with a very special tc aura 1508 cone if that sparks interest.Hey, man! Good to 'see' you. Really need cash for the time being but I'd love to hear more about the neo 15", shoot me a PM.

resko1
04-21-2013, 03:04 PM
Will do as soon as i get to my computer. Along with photos. Im actually looking for something smaller then a 15 and maybe you have something to fit the bill.

ciaonzo
04-22-2013, 11:28 AM
Monday, Monday...

ciaonzo
04-23-2013, 08:05 AM
I will also take 6 pieces of silver bullion for this.

ciaonzo
04-24-2013, 07:32 AM
Humpday.

resko1
04-24-2013, 01:00 PM
Sent you a pm.

ciaonzo
04-24-2013, 01:31 PM
Sent you a pm.Just noticed that, lol. Such a busy month for me...

ciaonzo
04-25-2013, 01:39 PM
Topside...

ciaonzo
04-26-2013, 03:10 PM
Gonna be a good weekend...

ciaonzo
04-26-2013, 03:39 PM
Can i interest you in a slightly used blowup doll, 6 pieces of orbit gum and a half drank bottle of crown i found on the side of the road?


EDIT: And 42 cents (and 1 Canadian penny)lulz

Sounds like a good time.

ciaonzo
04-27-2013, 11:51 PM
Om Nom Nom...

Bettr n' Revrse
04-28-2013, 12:35 AM
Trade me for an 8 lol

ciaonzo
04-28-2013, 11:39 AM
Trade me for an 8 lolNeeds money, mang!

Bettr n' Revrse
04-28-2013, 05:42 PM
Needs money, mang!

Ya me too but I could use this lol

ciaonzo
04-29-2013, 04:15 PM
Ya me too but I could use this lolSuper rare, bro... just buy it. It's so smooth when it plays, sounds very much like my LMS4000.

Iosias
04-29-2013, 04:20 PM
I want... so much.....

Bettr n' Revrse
04-30-2013, 01:45 AM
Super rare, bro... just buy it. It's so smooth when it plays, sounds very much like my LMS4000.

I may

ciaonzo
05-01-2013, 09:48 AM
Happy Hump Day


http://thechive.files.wordpress.com/2013/04/hot-women-yoga-pants-8.jpg?w=500&h=500

ciaonzo
05-03-2013, 11:04 AM
Weekend...

ciaonzo
05-04-2013, 08:36 PM
Oil change bump.

ciaonzo
05-07-2013, 07:49 AM
Up.

ciaonzo
05-10-2013, 07:30 AM
Velvet Hammer v.2

ciaonzo
05-13-2013, 09:50 AM
Monday...

ciaonzo
05-13-2013, 01:04 PM
you sure its not
Friday - Rebecca Black - Official Music Video - YouTube (http://youtu.be/kfVsfOSbJY0)Oh boy.... lol

Go2Sleep
05-13-2013, 02:17 PM
What a beaut... that FS of 15hz is :crazy:
GLWS

maintrain
05-13-2013, 03:02 PM
man do I want this

ciaonzo
05-13-2013, 09:45 PM
What a beaut... that FS of 15hz is :crazy:
GLWSJust so smooth and effortless.


man do I want thisI know you would use it the right way, too.

logan963
05-13-2013, 10:29 PM
I want it soooo bad! but teh monniess won't come my way fast enough :/

ciaonzo
05-13-2013, 10:58 PM
I want it soooo bad! but teh monniess won't come my way fast enough :/Never know... she's been here a while.

ciaonzo
05-17-2013, 07:31 AM
Topside...

ciaonzo
05-30-2013, 10:08 AM
One last bump!

ciaonzo
05-30-2013, 04:04 PM
Throw it in tha gutta, go buy anothaWas just listening to that album the other day, lol.

Nobody wants an 8" EPIC with a 15" cone? :p: Look at the Qts on this "under-motored" guy.

bassman_soundki
05-31-2013, 11:10 PM
Hey Shane!
I still have that Storm I got from ya...bout 50-60 hrs on her.
This sub sounds sweet with that low fs and expected flat response.
No cash right now, but I am looking for some more TC goodness in the (hopefully very) near future.

ciaonzo
06-01-2013, 12:49 PM
Hey Shane!
I still have that Storm I got from ya...bout 50-60 hrs on her.
This sub sounds sweet with that low fs and expected flat response.
No cash right now, but I am looking for some more TC goodness in the (hopefully very) near future.Hey, glad that's still goin' for ya!

tc300
06-01-2013, 09:15 PM
Kind of shocked to see this only has a 2 inch coil...... Are these the same as the eclipse 8000 subs?? OS that is

ciaonzo
06-02-2013, 12:10 AM
Kind of shocked to see this only has a 2 inch coil...... Are these the same as the eclipse 8000 subs?? OS that isNope, those had a TC9 which is a 3" coil.

This uses a TC2+ but no need to be afraid of the 2" coil, anyone who's ever used any of the RL-i or EPIC drivers can attest to their abilities. Only a lucky handful have ever heard the 15" get down.

mat3833
06-02-2013, 12:18 AM
man, it hurts SO bad that this is still here. i want it! i kno everyone on here is all about the POWAH, but this baby will eat lows and **** earthquakes...

Matt

ciaonzo
06-02-2013, 12:41 AM
man, it hurts SO bad that this is still here. i want it! i kno everyone on here is all about the POWAH, but this baby will eat lows and **** earthquakes...

MattIt does indeed, my friend.

maintrain
06-05-2013, 02:16 PM
I can't believe no one has bought these yet!! They would be AWESOME for home theater use! Flat 120db response down to 20hz in a 17.5cu ft ported box 13x4 slot port 21in length tuned at 17hz! Doesn't get much better than that! CHEAP low distortion sound here! Free bump for a nice guy with nice stuff!

http://i47.photobucket.com/albums/f151/mtrainer/tc1000_zps5e59cd00.png

ciaonzo
06-06-2013, 08:37 AM
Thanks, Marcus!

They do extremely well in smaller setups for the vehicle as well. Perfectly suited for home or car, music or movies.

SoCalBean420
06-17-2013, 12:33 AM
I will also take 6 pieces of silver bullion for this.

the most well informed post. i've seen on the boards in quite a while.

bump for, Mr. Means :)

ciaonzo
06-17-2013, 01:20 AM
the most well informed post. i've seen on the boards in quite a while.

bump for, Mr. Means :)Cheers, and thank you! :toast:

ciaonzo
07-01-2013, 10:16 PM
Still have this.

NSTALN
07-02-2013, 08:40 AM
Hey amigo! I hope all is well. What is the mounting depth, overall height, necessary front clearance, basket and magnet width/height respectively? Basically I need to know the most specific size/shape you can give....it's gonna be a tight fit for the application, but it may be perfect. I know you got a lot on your plate with the move and all so my apologies for the pain-in-the-arse questions but the archived TC site doesn't have any of the physical specifics of this driver. If this will fit, she'll most likely have a new home. Thanks mang! :naughty:

ciaonzo
07-02-2013, 09:40 AM
Hey amigo! I hope all is well. What is the mounting depth, overall height, necessary front clearance, basket and magnet width/height respectively? Basically I need to know the most specific size/shape you can give....it's gonna be a tight fit for the application, but it may be perfect. I know you got a lot on your plate with the move and all so my apologies for the pain-in-the-arse questions but the archived TC site doesn't have any of the physical specifics of this driver. If this will fit, she'll most likely have a new home. Thanks mang! :naughty:Just threw a graduation party this weekend but I know exactly where this driver is at now, I will dig it out tonight and measure everything for you!

ciaonzo
07-03-2013, 12:16 AM
Hey amigo! I hope all is well. What is the mounting depth, overall height, necessary front clearance, basket and magnet width/height respectively? Basically I need to know the most specific size/shape you can give....it's gonna be a tight fit for the application, but it may be perfect. I know you got a lot on your plate with the move and all so my apologies for the pain-in-the-arse questions but the archived TC site doesn't have any of the physical specifics of this driver. If this will fit, she'll most likely have a new home. Thanks mang! :naughty:Got it... Overall depth from the back side of the mounting flange is 8" including a half inch for pole venting. 3.5" of that is motor. Clearance for excursion is 2" fromt the back side of the mounting flange. Hope that helps!

ciaonzo
07-04-2013, 07:57 PM
Ttt

ciaonzo
07-07-2013, 11:11 PM
Finally, a week of vacation.

ciaonzo
07-14-2013, 01:27 PM
Hi.

ciaonzo
07-16-2013, 10:57 PM
Uppity.

LaserRed38
07-17-2013, 03:12 AM
Do you have the gasket for it? And for that matter, any for some 8" RL-i's? Can you take payments? :D

ciaonzo
07-17-2013, 07:35 AM
Do you have the gasket for it? And for that matter, any for some 8" RL-i's? Can you take payments? :DGasket is included! No extras for 8", sorry.

And no payments, lol.

LaserRed38
07-18-2013, 11:11 PM
2 payments of 150? Trying to hide it from the gf... :D

ciaonzo
07-19-2013, 09:53 AM
2 payments of 150? Trying to hide it from the gf... :DSorry, previous experience with payments leaves a bad taste in my mouth.

ciaonzo
07-22-2013, 09:38 AM
Up!

ciaonzo
07-24-2013, 11:15 PM
This motherfucker does it right.

ciaonzo
07-27-2013, 10:19 PM
Topside.

ciaonzo
07-30-2013, 02:04 PM
Up.

ciaonzo
07-31-2013, 10:51 PM
This is pending the arrival of silver!

ciaonzo
08-06-2013, 07:05 PM
My silver has arrived and this rare beauty is sold!