PDA

View Full Version : Zapco c2ks



crx4luke
04-12-2013, 09:21 PM
Item(s) for Sale:

1. Zapco C2k 3.0X
2. Zapco C2k 2.0X
3. Stinger SR200
4. Parrot BTE500


Item(s) Description/Condition:

1. 8/10 cosmetically. A couple of nicks here and there functions perfectly. One of the best sounding amps I've ever heard. No box or paperwork, but comes with tech flexed 17' symbilink cable.
2. 8/10 cosmetically. A couple of nicks here and there functions perfectly. One of the best sounding amps I've ever heard. Comes with all paperwork, cox amd birth sheet, as well as 17' tech flexed symbilink cable
3. definitely used. missing one of the nuts
4. Bnib, add on Bluetooth handsfree calling that will work with any radio including factory stereos



Price:

1.$325 shipped
2. $260 shipped
3. $20 shipped
4. $25 shipped




Shipping and Miscellaneous Item Information:

Included in pricing. Willing to accept possible trades for small footprint multichannel amps. Let me know what you have.


Item Pictures:
http://i283.photobucket.com/albums/kk290/crx4luke/For%20Sale/IMG_2359.jpg
http://i283.photobucket.com/albums/kk290/crx4luke/For%20Sale/IMG_2357.jpg
http://i283.photobucket.com/albums/kk290/crx4luke/For%20Sale/IMG_2345.jpg
http://i283.photobucket.com/albums/kk290/crx4luke/For%20Sale/IMG_2343.jpg
http://i283.photobucket.com/albums/kk290/crx4luke/For%20Sale/IMG_2342.jpg
http://i283.photobucket.com/albums/kk290/crx4luke/GTI_Stereo/DSC00292.jpg







(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

mat3833
04-12-2013, 10:27 PM
whats the power on these?

Matt

crx4luke
04-12-2013, 10:34 PM
2.0:
Stereo, 4 ohms: 2x50 Watts
Stereo, 2 ohms: 2x100 Watts
Stereo, 1 ohms: 2x200 Watts
Bridged, 4 ohms: 1x200 Watts
Bridged, 2 ohms: 1x400 Watts
T.H.D. + Noise: <0.02%
Frequency Response: 20Hz - 20kHz; +0 dB/-0.35 dB
S/N Ratio: >100dB
Transient Distortion: <0.01%
Slew Rate: >26V/uS
Damping Factor: >900
Input Sensitivity: 1-4 Volts or 4-16 Volts
Dimensions: 13.5"L x 8.75"W x 2.375"H

3.0:

Stereo, 4 ohms: 2x75 Watts
Stereo, 2 ohms: 2x150 Watts
Stereo, 1 ohms: 2x300 Watts
Bridged, 4 ohms: 1x300 Watts
Bridged, 2 ohms: 1x665 Watts
T.H.D. + Noise: <0.015%
Frequency Response: 20Hz - 20kHz; +0 dB/-0.32 dB
S/N Ratio: >100dB
Transient Distortion: <0.008%
Slew Rate: >28V/uS
Damping Factor: >1000
Input Sensitivity: 1-4 Volts or 4-16 Volts
Dimensions: 17.5"L x 8.75"W x 2.375"H

bubbagumper6
04-12-2013, 10:43 PM
More pics of the SR200? Why does it look like the case is broken?

mat3833
04-12-2013, 10:45 PM
are those under-rated specs? or close to spot on?

Matt

crx4luke
04-12-2013, 10:49 PM
I can get some, but I'm layer up in bed right now. It is just the bottom of the casing. The rest is fine. It has been a bit since I really looked at it. Also I forgot but I have a big case of misc wires, harnesses, and relays if anyone sees anything of interest.

http://img.tapatalk.com/d/13/04/04/agebeqan.jpg

crx4luke
04-12-2013, 10:52 PM
Pretty close to spot on. Super clean though, and I never felt like I was lacking for power. I ran the 3.0 on a set of three way hertz hi energy components and the 2.0 on a high energy 10". Sounded amazing.

crx4luke
04-13-2013, 05:54 PM
http://img.tapatalk.com/d/13/04/14/pyqytu9u.jpg
http://img.tapatalk.com/d/13/04/14/anaty7am.jpg

crx4luke
04-13-2013, 06:59 PM
Willing to deal if someone wants both amps.

bubbagumper6
04-13-2013, 07:01 PM
I'll take the isolator, pm me paypal addy

crx4luke
04-13-2013, 07:03 PM
Pm sent

crx4luke
04-13-2013, 10:03 PM
Isolator sold.

Any interest in the amps? One or both?

crx4luke
04-14-2013, 12:01 PM
I'll take $300 on the 3.0 and $250 on the 2.0

crx4luke
04-15-2013, 10:18 AM
I can work with the pricing a bit.

crx4luke
04-15-2013, 04:00 PM
$500 shipped for both amps and the symbilink.

crx4luke
04-16-2013, 12:13 AM
Can include about 15' of speed wire (metra) for free.

robert_wrath
04-16-2013, 04:57 PM
Ar these the Pewters?

crx4luke
04-16-2013, 07:03 PM
Honestly not sure how to tell. The 3.0x has silver lettering on the badge, and silver terminals, while the same on the 2.0x is gold. Neither has the aluminum 30th anniversary badge. The black and the silver finish on the exterior of both look the same. Of there is any other way for me to tell let me know and I'll look.

robert_wrath
04-16-2013, 07:31 PM
The Black Paint is usually a High Glossy Finish.

crx4luke
04-16-2013, 08:36 PM
They look pretty glossy to me. I can put them in some better light and take some more pictures, so you can see how glossy they are. Is there any other way to tell? anything with the model number or serial number?

robert_wrath
04-16-2013, 08:45 PM
Someone just confirmed the units you have are the Pewter. The Emblems are the dead giveaway.

crx4luke
04-16-2013, 08:47 PM
excellent. Remember though that the emblems are different. One has the lettering in gold and the second has the lettering in silver. Other than that the finishes are all pretty much the same.

crx4luke
04-16-2013, 11:06 PM
So, interested in buying?

robert_wrath
04-16-2013, 11:14 PM
I was looking for the Black Units.

crx4luke
04-16-2013, 11:20 PM
Well let me know if you change your mind. I really just want to sell these to get my next setup started. I really love the sound of these amps, just trying to get two 4 channels instead of two 2 channels.

robert_wrath
04-16-2013, 11:45 PM
Make sure you have a High Output Alternator & Battery(s) ready to go under the bonnet.

crx4luke
04-16-2013, 11:51 PM
I'm actually looking to go with small g or d class 4 channels. Something like the PPI 900.4 or similar. But I'm probably going to need something like the H660 or MS-8 for all of the functionality and keeping my stock HU. Will be the first time in 14 years I haven't used a zapco amp. Will be weird.

robert_wrath
04-17-2013, 12:31 AM
You may want to consider:
Zapco DC1004
Zapco - DC Series (http://www.zapco.com/zapcodcseries.html)

http://www.zapco.com/files/z_dc1004_001.png
Specifications:

Stereo, 4 ohms: 4 x 150 Watts
Stereo, 2 ohms: 4 x 250 Watts
Bridged, 2 ohms: 2 x 500 Watts
T.H.D. + Noise: <0.017% @ 4 ohms

-On-Board, Full Function DSP
-Intelligent Rail Voltage Control
-Short term stable to below 1 ohm/Ch
-USB Input for PC Control
-2nd Generation Digital Programming Network
-Heavy-Duty, High-Current, Insulated Terminal Blocks
-Space Saving Flush Wiring Connections
-Bridgeable
-Three-Channel Capable
-Gate Drive Boost Circuit
-High-Current Bipolar Outputs
-Optically Isolated MOSFET Power Supply
-Three year warranty (If Authorized Dealer Installed)
-Quality Zapco construction
-Dimensions in Inches 24.40(L) x 7.12(W) x 2.35(H)

crx4luke
04-17-2013, 09:01 AM
I wouldn't mind a DC Ref so much, but I think I'd rather have a 650.6 to do the whole system. Honestly I don't have a ton of space in the car, so that is why I was looking at the small footprint amps. Plus I don't have much of a budget. Only what I can sell my stuff for. If these don't sell I'll just use them. They are such awesome amps.

crx4luke
04-17-2013, 07:31 PM
Bump for super nice amps. Prices are not set in stone. Make some offers

crx4luke
04-18-2013, 06:28 PM
bump

crx4luke
04-19-2013, 11:08 PM
I've got my subs, processor, and front stage squares away. Will take trade for a nice small footprint 4 channel for either amp (within similar price range) or will consider other offers.

crx4luke
04-21-2013, 11:39 PM
More pics

http://img.tapatalk.com/d/13/04/21/eqara6u3.jpg
http://img.tapatalk.com/d/13/04/21/epy6yty8.jpg
http://img.tapatalk.com/d/13/04/21/pe4e4ehu.jpg

NuckinFutz
04-21-2013, 11:43 PM
So nice.

crx4luke
04-25-2013, 11:31 PM
Bump

crx4luke
05-13-2013, 07:19 PM
Bump. Need a 5 or 6 channel amp to replace these.

aj1735
05-15-2013, 03:31 AM
I am still interested. I pm'd you this evening. I am trying to get the money together. Hopefully I can get my gear sold asap.

crx4luke
06-24-2013, 08:09 PM
Bump.