PDA

View Full Version : pioneer park brake wire question



musclesoh92467
04-11-2013, 10:42 AM
i have a new pioneer dvd streo avh 1500 can anyone tell me if i have the correct diagram for wiring the park brake wire relay and doing this will it enable to dvd to operate while not in park and also i have my amp blue wire connected to radio ignition wire so would i have to change that connection for this sey upi?26541531

crx4luke
04-11-2013, 11:27 PM
Wrong section. Correct wiring.

rfmayhem
04-13-2013, 06:36 AM
correct but the only think you have to do is put remote wire from radio to 85 and you can keep amp turn on the ignition
the bypass needs a delay if you run it to the ign. it might not work

musclesoh92467
04-15-2013, 11:12 AM
do i have to run direct ground wire to relay from HU or just jumper 86-87 then ground from there?

rfmayhem
04-15-2013, 03:33 PM
do i have to run direct ground wire to relay from HU or just jumper 86-87 then ground from there?

86 &87 then ground ...you can ground it to the HU neg.

musclesoh92467
04-15-2013, 05:18 PM
ok thanks.....

musclesoh92467
04-16-2013, 01:10 PM
86-87 then ground and also wont hurt to connect HU ground into 87?