View Full Version : ADS AL6 Component Set

03-17-2013, 03:13 PM
Item(s) for Sale:
ADS AL6 Component Set
Mids and tweets (NO CROSSOVER)

Item(s) Description/Condition:

The speakers are in very good condition and have no cone damage. They only have minor scratches on them. What do you expect from something almost 15 years old. The mids on this set are absolutely awesome and play with very warm sound. They also have some of the most laid back tweeters I have every heard. I don't have the crossovers but I have read reviews about how they go into protect pretty easily. So I highly recommend using them active, who runs passive these days anyway?



Shipping and Miscellaneous Item Information:

You Pay

Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
http://www.freeimagehosting.net/t/5ku8p.jpg (http://www.freeimagehosting.net/5ku8p)
http://www.freeimagehosting.net/t/m141a.jpg (http://www.freeimagehosting.net/m141a)

http://www.freeimagehosting.net/t/c5xkq.jpg (http://www.freeimagehosting.net/c5xkq)
http://www.freeimagehosting.net/t/fvvr7.jpg (http://www.freeimagehosting.net/fvvr7)
http://www.freeimagehosting.net/t/bgr3b.jpg (http://www.freeimagehosting.net/bgr3b)
http://www.freeimagehosting.net/t/wcbl7.jpg (http://www.freeimagehosting.net/wcbl7)

03-17-2013, 03:14 PM
If someone has a link to a manual for these please post it. All i know about these is that they are 4 ohm.

03-19-2013, 02:04 PM
bump n grind

03-21-2013, 11:51 PM

03-23-2013, 10:30 PM
I have a set of AL-5 Crossovers if anyone needs them. Same values! These are some awsome sounding speakers by the way!

03-24-2013, 02:04 AM
I have a set of AL-5 Crossovers if anyone needs them. Same values! These are some awsome sounding speakers by the way!

thx ya awesome sounding speakers

03-25-2013, 06:38 PM

03-28-2013, 11:09 PM
thx ya awesome sounding speakers

I'm partial to the 320is.

03-29-2013, 11:41 PM
Why do the spade connectors look like they are rotated? Is there any damage to the VC Leeds? Can you post a close-up pic of these locations?

03-30-2013, 12:05 AM
They actually can rotate all the way around which is handy for hiding the wire when putting the speaker in.

03-31-2013, 01:20 AM
Hmmm, you know they aren't supposed to do that right? They are normally fixed and pointed at the bottom of the magnet. Might want to epoxy them or hot glue them so they don't rotate.