View Full Version : Which 4" x 6" should I get?
03-12-2013, 12:17 AM
I want to place them in the front of my 2000 S10 truck and power them with my JVC KD-R530 HU. I filter all the low freq to my subwoofer.
I'm looking at the Rockford Fosgate Punch P1462 and the Pioneer TS-A4674R and I'm not sure which ones are best. I'm also open to other suggestions that are not too pricey (around $50).
03-12-2013, 10:23 AM
at that price it's whatever you find. i've used the Pioneer in an install before and they were fine once i sealed everything up.
i stuffed polyfill all around the speaker and in the cavity, as much as possible.
you can see the use of weatherstripping foam along the top to seal against the dash grill
03-12-2013, 11:43 AM
Thanks for the info man. I could go up to $80 if there's anything better you would recommend.
For the polyfill, do I pack that all around the speakers as much as possible, including all underneath them?
03-12-2013, 11:42 PM
When I order those speakers do I get 2 for $50, or is that $50 for each speaker?
03-12-2013, 11:58 PM
They are in a pair from amazon http://www.amazon.com/Pioneer-TS-A4674R-A-Series-3-Way-Watts/dp/B004CLYOIC
03-13-2013, 03:08 AM
they come boxed together for $50. pretty cheap.
polyfill is to help fill any voids the rear of the speaker sees.
03-13-2013, 07:33 PM
Thanks for all the help so far guys. I just ordered the Pioneer speakers.
Should I also put polyfill in my sealed sub box? If so, should I just line the insides with it or pack the inside completely with it?
03-13-2013, 07:39 PM
pack it full