View Full Version : IR codes for Clarion remotes?

03-07-2013, 05:07 AM
I'm trying to control my clarion headunit using an IR led. Since my own remote isn't functioning at all, I cannot use this device to learn the IR codes transmitted by the original remote, so I'm looking for someone with a working remote who's willing to help me out :)
If you have a clarion remote and are able to extract some IR codes using a logitech harmony or any IR-learner tool, I'd be specifically interested in the one for the open/close button! Probably a long shot, but if anyone could help me out I'd be very grateful :D

06-23-2013, 03:22 PM
If still relevant, see below the configuration file created by winlirc for Clarion CZ500 remote. Technical information about file format can be found here: winlirc.sourceforge.net/technicaldetails.html

# brand: Clarion
# model: CZ500
# supported devices: CZ500, CZ501, CZ302

begin remote

name Clarion-CZ500
bits 16
eps 25
aeps 100

header 9002 4514
one 558 532
zero 558 1664
ptrail 558
pre_data_bits 16
pre_data 0x9EF9
gap 43327
toggle_bit 0

begin codes
SRC 0x0000000000003FC0
BND 0x000000000000AF50
Up 0x00000000000027D8
Down 0x00000000000047B8
Bck 0x0000000000009768
Fwd 0x00000000000017E8
PlayPause 0x000000000000EF10
Mute 0x0000000000005FA0
ISR 0x000000000000DF20
DISP 0x000000000000E31C
SCN 0x0000000000007788
RPT 0x000000000000E718
RDM 0x0000000000006798
end codes

end remote

I tried to use this info to control my Clarion with arduino via SWC but with no success :(
I know that such technique works for Alpines and Kenwoods. Anyone reversed engineered the SWC protocol for Clarion units?