View Full Version : S10 blowthrough help

03-06-2013, 02:37 AM
I'm going a start a blowthrough project on my singlecab s10. Im going to be using 2 hdc3 subs and can't decide between 12s or 15s. I'm going for spl obv given the subs I'm using. Someone help me out here on deciding sub size. Also I'm torn between a 4th order (confused as hll on how to build one that will sound good) or a regular slot ported box... I'm leaning towards ported. Should I make 2 chambers w 2 ports. Or a single chamber w one port? Helllp.lol

03-06-2013, 03:14 AM
I'd do 15's if they'll fit. Seems silly to cut up a vehicle for 2 12's.

HDC's are not 4th order friendly. Do a reg ported box, single chamber and center port. Also depending upon where the box ends up and if you have to use panels to seal it off into the cabin that might lower tuning...

03-07-2013, 01:28 AM
What do u mean panels? I planned on sinking the face of the box in about 2 inches so there's a lip on the front of the box. I've never owned 15s. Are they alot different then 12s sound and knock? Thanks for the info on the box tho.

03-07-2013, 01:32 AM
15's no question. I would go with different subs and do a 4th order.. Tantric would be my pic for a blow through

03-07-2013, 11:52 AM
Do a series 6th order. I can design on for you. Those subs will be nasty in one.