PDA

View Full Version : FS - Shocker Sig Big Gap Quad 1.2 ohms, Daily Monster!



Silver-N-Black
03-04-2013, 09:11 AM
Item(s) for Sale:

Shocker Sig Big Gap


Item(s) Description/Condition:

18", Quad 1.2dcr, Beefy TC Sounds 8 Layer FW Aluminum Coil for the big gap Motor, 2 Spaced 8" TC Sounds Spiders w/leads sew in and a Nice Cone. 3.060" Peak to Peak before the coil hit the back plate. The sub Was Built for a daily aplication so I'll say 1800-2500w because of the spider pack as I know the Coil will handle way more. **** Sub was build by Zeuslicious.

Sub was used for about a month, motor is used with a couple of chips but good condition overall.

Price:

350 OBO, local pick only.


Shipping and Miscellaneous Item Information:




Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

http://i1185.photobucket.com/albums/z347/gruiz11/2C618050-4F7F-493B-A9E2-52EA80A1EBFF-7567-00000BBEA50BB267_zpsa293d41a.jpg
http://i1185.photobucket.com/albums/z347/gruiz11/C80D04A2-E087-449B-9367-14FF62907CB8-7452-00000B27B85C1921_zps2c2f7812.jpg

hispls
03-04-2013, 09:17 AM
Word on the street is that there were only @ 200 big gap motors ever made. Quite sought after for the ability to throw nearly any coil in them. Very nice.

04murdalanche
03-04-2013, 09:25 AM
Word on the street is that there were only @ 200 big gap motors ever made. Quite sought after for the ability to throw nearly any coil in them. Very nice.

Wow that's really impressive. And only 200? Sheit, rare piece right here. Beautiful sub, wish I had room for an 18, glws my man

hispls
03-04-2013, 09:43 AM
Wow that's really impressive. And only 200? Sheit, rare piece right here. Beautiful sub, wish I had room for an 18, glws my man

Yep. I had a few and sold them since the small gap motor gains about .7 to 1.0 dB. Found out a little later talking with Shocker Mike that that was all he ever had made... I'd have kept mine had I known they were so scarce.

04murdalanche
03-04-2013, 07:22 PM
Yep. I had a few and sold them since the small gap motor gains about .7 to 1.0 dB. Found out a little later talking with Shocker Mike that that was all he ever had made... I'd have kept mine had I known they were so scarce.

a whole db!? deuym, what does the tighter gap effect to help acheive this?

hispls
03-05-2013, 01:45 AM
a whole db!? deuym, what does the tighter gap effect to help acheive this?

The attractive force of magnets is inverse square of the distance between their poles, as I can tell it's a bit more complicated as they get closer together, but generally speaking the forces are not simply doubled by halving the distance, but squared. Hold 2 magnets apart and bring them together, notice the force gets dramatically stronger the closer you bring them together, the effect is more dramatic the closer and closer you bring them together. The tradeoff is how much coil you can throw in the gap (the ammount of metal in the coil = thermal handling), and of course if it's too tight when the coil expands from heat it'll seize up in the gap. Also when you assemble them the margin of error is almost nil. Still though, throw a big 8 layer coil on a big gap motor and it'll go really nice and take plenty of power.

If OP was local I'd own this by now.

Silver-N-Black
03-06-2013, 08:38 AM
Hispls thanks for all the great info move to socal and its yours..

ktraughb
03-06-2013, 06:50 PM
i have a large gap sig sitting in front of me...doesnt look like that sub. you sure thats what you have?

Silverado SS
03-06-2013, 07:27 PM
i have a large gap sig sitting in front of me...doesnt look like that sub. you sure thats what you have?

Post pic and compare and OP what's the mounting depth?

ktraughb
03-06-2013, 07:48 PM
Post pic and compare and OP what's the mounting depth?
here is a photo of these. my teammates have four of these total. large gap, 8 layer coil sigs.
http://img15.picoodle.com/i536/ktraughb/34vr_307_ua08c.jpg (http://i.picoodle.com/261ji81c)Uploaded at Picoodle.com (http://www.picoodle.com/)

Silverado SS
03-06-2013, 08:42 PM
Top of motor does look a little thicker. But who knows might just be the angle

Silver-N-Black
03-07-2013, 08:20 AM
Sub was owne and build by Zeuslicious he called it a shocker Sig.
http://www.caraudio.com/forums/subwoofer-classifieds/537011-shocker-sig-big-gap-quad-1-2-ohms-daily-monster-**pics**.html

325 bump.

ktraughb
03-07-2013, 06:39 PM
Maybe just the ferrite part is the same? I've actually seen another sig with an even bigger top plate than the ones we have.

BassAddictJ
03-09-2013, 02:39 AM
**** sub

Silver-N-Black
03-18-2013, 08:38 AM
I know someone in socal needs a good sub.

lilmaniac2
03-19-2013, 11:18 PM
GL with the sale, I had 4 of these at one point in time, beast of a sub

Silver-N-Black
03-21-2013, 08:08 AM
Yep its a realy good sub, someone local should buy it.

Silver-N-Black
03-23-2013, 02:55 PM
300 some take this sub and use it.

It happens
03-23-2013, 11:12 PM
only doing local???

300 some take this sub and use it.

Silver-N-Black
03-29-2013, 09:05 AM
I will be getting shipping supplies. If anyone wants to pay for shipping let me know.

It happens
03-29-2013, 12:59 PM
amy trades


I will be getting shipping supplies. If anyone wants to pay for shipping let me know.

Silver-N-Black
03-29-2013, 01:07 PM
nope no trades. I have everything I need for my next build. Just need cash to put back into my savings.

It happens
03-29-2013, 09:17 PM
cool cool just had to ask ...glws

Silver-N-Black
04-03-2013, 10:16 AM
325 plus shipping.

Silver-N-Black
04-08-2013, 08:18 AM
bump

Silver-N-Black
04-16-2013, 02:43 AM
Someone local has to want a monster 18...

Silver-N-Black
04-18-2013, 10:25 PM
Someone taker and giver her a new home. 300 local, i can ship her if you pay for shipping

GeekSquad
04-18-2013, 10:54 PM
This isnt a sig motor but it is one nasty beast. Look at the diameter of the magnets.

I am interested if you decide to ship it.

Zeuslicious
04-19-2013, 01:22 AM
^^^ wrong...
It is a Shocker Sig big gap motor, is one of 2 motors that mike modded for some competitor, Back in the years, the only difference is the top plate height. Not as tall as the oem not modded...
Good Luck OP

Silver-N-Black
04-19-2013, 11:46 AM
^^^^ Thank you for the info Sir

Silver-N-Black
04-19-2013, 04:50 PM
This isnt a sig motor but it is one nasty beast. Look at the diameter of the magnets.

I am interested if you decide to ship it.

If you pay for shipping i'm willing to ship.

Silver-N-Black
04-23-2013, 06:29 PM
Bump....

™Caveman
04-23-2013, 11:59 PM
Seen this on cl. Have any 10's laying around?

Silver-N-Black
04-29-2013, 01:21 PM
Seen this on cl. Have any 10's laying around?

Nope no 10's. But I do have a big 18':):)

Silver-N-Black
05-03-2013, 10:07 AM
Willing to take trades..