PDA

View Full Version : Viper V5701 problems



emmd2001
02-21-2013, 09:27 AM
Hi all -

I have an after-market V5701 installed on my vehicle. Until recently, it has been working fine.

Now I am having some issues. Hopefully someone on here can help me out!

1. After issuing a command, and getting confirmation on the remote, the remote gives a series of 2 low-pitched beeps and flashes the red light. This continues until I press another key.
2. After hitting any command, I now get a repeat chime (like I'm pressing the key again) before receiving the confirmation chirp for the respective command
3. I can't get the rear defrost to come on - I just get an error tone now
4. After unlocking the car, the car gives the standard 2 chirps, then pauses, then gives an additional single chirp.

Thanks for any help you can offer!

kramer_212
02-21-2013, 09:33 AM
either a faulty brain but more likely bad install, did you meter all of your wires? and check them twice.

emmd2001
02-21-2013, 09:40 AM
System has been installed for ~ 1 1/2 years and was fine until 1 week ago.

Not sure if somehow setting got changed by pocket-pushes on the remote (and if so how to fix them!) or something else...

NFrazier
02-22-2013, 11:32 PM
lmao to the faulty brain/bad install comment. change your batteries in your remote. all of these beep notifications are telling you the batteries are low ;)

btw the 2 way remote takes 2x 2016, the 1 way takes 1x 2032