View Full Version : MDF and acrylic

04-18-2004, 09:30 PM
Hi guys, i have a question. I want to build a ported box using mdf and acrylic, my q is that if can be correct putting my box facing up, the subs will be facing up and the port too, will sound good? they will be 2 kicker Cvr12" 3.5cuft 36hz.
the example its under this:

04-19-2004, 07:21 AM
Yeah straight up will work. But before you get all the plexi panels cut. I would play around with the positioning first. See which actually sounds better too you in your specific car. Then go back and put in your plexi panels. :)

04-19-2004, 12:07 PM
ok man thx. The position of my box will be facing up, i wanr a ported box with acrylic and mdf, i donīt want a bandpass box. thx dude!

04-19-2004, 12:13 PM
Just make sure if everything is firing up, you put some deadener on your rear deck, and the trunk lid if you have a trunk. Otherwise it will rattle like all holy he!! :)

04-19-2004, 07:38 PM
ok thx dude!