PDA

View Full Version : 4 10"s 40" wide box....



Popwarhomie
02-14-2013, 12:20 AM
Need some ideas. I want to run 4 AT 10"s but im limited to 40" wide box and 17" tall. I want them all forward firing and sealed off from the trunk.

Someone work your box magic.

My odd trunk opening.. Probably will have to build the box inside the car.

Excuse the mess in the picture its about a year old and just was testing everything out.
http://i166.photobucket.com/albums/u85/popwarhomie/IMAG0335.jpg

pro-rabbit
02-14-2013, 12:21 AM
Would likely have to do some kind of angle to the front in order to get the area needed to mount them.

bumpinexploder
02-14-2013, 12:26 AM
at 17 tall you could stagger them just enough to get away with room on either side. and then angle the baffle just a bit to keep them from smashing your cabin opening braces. and as far as loading it might hinder your 2 outside subs.

Popwarhomie
02-14-2013, 12:42 AM
http://i166.photobucket.com/albums/u85/popwarhomie/photo-24_zps0cdf8f97.jpg

:D


That wood was actually 16" tall so I would have another inch to work with..

Now 2 4" aeros or 1 6"...

bumpinexploder
02-14-2013, 12:48 AM
1 6 all the way. lil more port area

Popwarhomie
02-14-2013, 01:00 AM
One 6" enough port for 4 10s? Might be able to get three 4"s

kushy_dreams
02-14-2013, 01:06 AM
Do a clamshell with the woofers firing inwards at each other and vent it towards the front of the vehicle

Popwarhomie
02-14-2013, 01:11 AM
Do a clamshell with the woofers firing inwards at each other and vent it towards the front of the vehicle

That would be cool.

pro-rabbit
02-14-2013, 01:14 AM
Do a clamshell with the woofers firing inwards at each other and vent it towards the front of the vehicle

That was kind of the idea I was going to suggest, was waiting to get home to do a rough draw of it to give the idea..but you seemed to have got the point a crossed lol

kushy_dreams
02-14-2013, 01:33 AM
here's a crude ms paint drawing of how it would look:

http://img854.imageshack.us/img854/9757/subsx.jpg

mklett33
02-14-2013, 02:41 PM
here's a crude ms paint drawing of how it would look:

http://img854.imageshack.us/img854/9757/subsx.jpg


Best drawing ever! Haha, i like it. I think you would still have to stagger the subs on their mounting surface though

kushy_dreams
02-15-2013, 03:11 AM
Best drawing ever! Haha, i like it. I think you would still have to stagger the subs on their mounting surface though

no staggering needed unless you are limited by the depth of the box.

Popwarhomie
02-15-2013, 03:13 AM
How would I figure out the cubic foot of a box like that?

Austin175
02-15-2013, 03:33 AM
Have someone on here make you a design like that :) is one way lol but I agree that clamshell would be sweet.

BassMechkanic
02-15-2013, 02:01 PM
4th order, port thru rear deck with 2 6" aeros.....

kushy_dreams
02-15-2013, 03:12 PM
How would I figure out the cubic foot of a box like that?

have a box designer on here do the design for you. show them the picture and explain what you want. I'm not sure how to calculate clamshells like that. But I do know that when the baffles reach a certain angle range, the box turns into a 4th order

itsblown
02-15-2013, 03:17 PM
Interesting to see the responses on here, Im about to have to fit 3 15's in a 46 inch wide space.

oxsign
02-15-2013, 04:16 PM
I was looking at fitting 3 10"s in a 36" x 12" area. Now I may have to rethink it, lol.

pro-rabbit
02-15-2013, 04:44 PM
Once you start playing around with angles and such there are tons of options out there. Just don't do what we did with the Tahoe..took forever to cut out all those holes lol.....

fannin88
02-15-2013, 04:50 PM
Op, is that a 1200 running those oa's?
Iv pondered 4 10s (budget on low power, just to try) but I only have 31w to work with. I was kind of figuring on firing them up toward the trunk lid if I was to. Anyways, keep us posted on what you do.

Popwarhomie
02-15-2013, 04:57 PM
Op, is that a 1200 running those oa's?
Iv pondered 4 10s (budget on low power, just to try) but I only have 31w to work with. I was kind of figuring on firing them up toward the trunk lid if I was to. Anyways, keep us posted on what you do.

Yes AQ1200 on the Obsidians.