PDA

View Full Version : 09 Lancer (100lbs of stuff in a 2lbs bag)



TheycallmeJT
02-11-2013, 09:23 AM
Working on doin an install for my buddy on his 09 Lancer. Box is having to be built inside the trunk. Box is about 6.1cubes gross, after all displacements is is about 5.4cubes. Tuned to around 36hz. All seams will be glassed and matted to insure tight sealed and strength. Equipment is 2 Atomic APX 12's on 2 Audioque AQ2200, 2 Kinetik hc2000, Audio Technix wiring and Big 3. Pioneer avh-x5500bhs headunit
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130119_183124_748_zpsf65f3588.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_190823_839_zpsa254f28a.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_190457_065_zpsab914f4c.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_190922_922_zps10b894a0.jpg
Dry fitting box
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130204_174835_568_zps2c86c03d.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_170302_418_zps285fd975.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_170317_976_zps59a4886b.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_170247_251_zpsb81e7a0e.jpg

TheycallmeJT
02-11-2013, 09:25 AM
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_184324_201_zpsf18bdb1d.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130209_180422_069_zpsd56e0826.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130210_153853_460_zps11932b62.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130210_153836_355_zpsd6af634c.jpg

ThatChevyGuy
02-11-2013, 03:12 PM
looking good

Austin175
02-11-2013, 03:25 PM
nice stuff should be loud :). i want a lancer so bad :(

TheycallmeJT
02-12-2013, 09:52 PM
Started some of the glass work today
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130212_151928_211_zpsed960f46.jpg

DB-Audio
02-12-2013, 10:10 PM
Looks nice so far

TheycallmeJT
02-13-2013, 09:24 PM
Got a lil more done today. Top on and glassed. Still have somemore glassing to do inside and get the back on hopefully tomorrow
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130213_134441_388_zpsd480218b.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130213_134454_289_zpsb4e28e89.jpg

TheycallmeJT
02-14-2013, 06:53 PM
Woo gettin close to it playing.
Lay out of amps. Will be attached to rear of box. With a washer seperating. It is a very very close fit between amps and trunk lid
http://i260.photobucket.com/albums/ii10/theycallmejtizle/20130214_112243_zpse7931261.jpg
Highs amp mounted
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130214_173457_425_zps72e1691f.jpg

obxsurfisher
02-14-2013, 07:15 PM
Nice! Its gonna slam!

TheycallmeJT
02-17-2013, 10:07 AM
http://www.youtube.com/watch?v=Rw69XZ11e4M&list=UU3fgcBMJMMOVaJBEnN8jVmw&index=1

Wanacustomx
02-17-2013, 10:28 AM
nice lets get some vids in the light boss... **** slams though.

TheycallmeJT
02-17-2013, 10:30 AM
nice lets get some vids in the light boss... **** slams though.
Oh yes sir, very soon. This was just to make sure it was playing and late at night. Possible more videos today

T.I.K
02-17-2013, 12:18 PM
looking good bro

TheycallmeJT
02-19-2013, 10:41 PM
Boom!

http://www.youtube.com/watch?v=dnEELU-ML3M&list=UU3fgcBMJMMOVaJBEnN8jVmw&index=1

BrownVanMan
02-19-2013, 10:43 PM
Nice install

TheycallmeJT
02-20-2013, 07:01 AM
http://www.youtube.com/watch?v=4AorCz3wSXo&list=UU3fgcBMJMMOVaJBEnN8jVmw&index=1

04murdalanche
02-20-2013, 03:39 PM
Moar!!!

FamousMassacre
02-20-2013, 03:43 PM
How do you like that head unit?

TheycallmeJT
02-20-2013, 04:02 PM
How do you like that head unit?
I really like it. Very clean look. Distorts at 38 out of 42 on volume. Great amount of apps. Very clear Pandora and Bluetooth.

FamousMassacre
02-20-2013, 04:33 PM
I really like it. Very clean look. Distorts at 38 out of 42 on volume. Great amount of apps. Very clear Pandora and Bluetooth.

People were telling me not to get it because it has 2v outs in the back...

TheycallmeJT
02-20-2013, 05:32 PM
People were telling me not to get it because it has 2v outs in the back...
Negative. It has 4v outs :thumbupw:

FamousMassacre
02-20-2013, 06:11 PM
Negative. It has 4v outs :thumbupw:

From Amazon:
"3 RCA Preouts (2V) and Navigation Ready"

TheycallmeJT
02-20-2013, 06:26 PM
From Amazon:
"3 RCA Preouts (2V) and Navigation Ready"
Make sure your readin the right model. Says it on my box. On cruthfield, sonicelectronix

RicksI30
02-20-2013, 06:28 PM
From Amazon:
"3 RCA Preouts (2V) and Navigation Ready"

Well then Amazon is wrong.

RicksI30
02-20-2013, 06:30 PM
On cruthfield, sonicelectronix


More importantly AVH-X5500BHS - <b>NEW!</b> - 2-DIN Multimedia DVD Receiver with 7" WVGA Touchscreen Display, MIXTRAX, Bluetooth®, HD Radio™ Tuner, SiriusXM Ready, and AppRadio Mode for iPhone® | Pioneer Electronics USA (http://www.pioneerelectronics.com/PUSA/Car/DVD-Receivers/AVH-X5500BHS)

FamousMassacre
02-20-2013, 07:34 PM
Well then Amazon is wrong.


More importantly AVH-X5500BHS - <b>NEW!</b> - 2-DIN Multimedia DVD Receiver with 7" WVGA Touchscreen Display, MIXTRAX, Bluetooth®, HD Radio™ Tuner, SiriusXM Ready, and AppRadio Mode for iPhone® | Pioneer Electronics USA (http://www.pioneerelectronics.com/PUSA/Car/DVD-Receivers/AVH-X5500BHS)

Amazon.com: Pioneer AVH-X5500BHS Multimedia DVD Receiver with 7" Motorized Touchscreen Display: Car Electronics (http://www.amazon.com/gp/product/B00A02KOHM/ref=gno_cart_title_2?ie=UTF8&psc=1&smid=AO3YTZ6BCMVCB)

That's what I was looking at.

TheycallmeJT
03-03-2013, 07:38 PM
So after an issues we had with the atomics, Rob decided to sell them and picked up some Zv3's with all NS upgrades. With puttin them in and playing with them a little they dont seem as loud to ear right now, but can tell they build more pressure. May have to shrink box down a little and see if we gain anymore. They do sound much more musical tho
Tinsel broke away from the direct connect on the atomic
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130225_163007_364_zps50035786.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130303_162420_911_zps8e63ed86.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130303_162506_334_zps8dce1f3c.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130303_162434_184_zps722a8ce6.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130303_173352_543_zps335a9389.jpg

04murdalanche
03-03-2013, 08:26 PM
what size box, and tuning are they in now?

TheycallmeJT
03-03-2013, 10:16 PM
what size box, and tuning are they in now?
Same box. Same tuning. Its about 6.1gross. 4.9net. Tuned to 36. Peaks at 34. I think ima add some 45's and stuff to take up a lil space. Ima work on sealing it off from the trunk this week. When it hits about 32 and lower they just seem to unload real quick

splwj47
03-03-2013, 10:27 PM
Selling thos atomics?

TheycallmeJT
03-03-2013, 10:29 PM
Selling thos atomics?
He already sold them

splwj47
03-03-2013, 10:31 PM
He already sold them

Shiittyyy.

captainobvious!
03-11-2013, 02:31 PM
Curious...Why the fiberglass on the inside? Also, why no real bracing for a 6 cubic foot box? You'll have lots of loss due to flex alone...?

TheycallmeJT
03-11-2013, 03:31 PM
Curious...Why the fiberglass on the inside? Also, why no real bracing for a 6 cubic foot box? You'll have lots of loss due to flex alone...?
The fiberglass is for added strength. The way the box is build and the angles of it didn't really need for any heavy bracing. Its not just a rectangle box. There is no major flex issues with the box.


He's already wanting to plan me building another box that will basically have a fiberglass mold of the entire trunk to do 2 15's

captainobvious!
03-11-2013, 08:18 PM
The fiberglass is for added strength. The way the box is build and the angles of it didn't really need for any heavy bracing. Its not just a rectangle box. There is no major flex issues with the box.


He's already wanting to plan me building another box that will basically have a fiberglass mold of the entire trunk to do 2 15's


Putting some resin around the corners isn't going to do much of anything for strength. A simple bead of silicone would be fine if its purpose was to ensure a good seal though (which is what I thought he was doing with it). I figured it's mush easier (and less messy to boot) to use silicone instead of breaking out resin for that.

In addition, there is NO way, I repreat NO way, that a 6 cubic foot box with large flat walls condtructed of 3/4" MDF is not getting serious losses from flex, especially judging by the construction pic. I'm simply stating this to help out. You can make a very solid large box with 3/4 MDF, don't get me wrong, but you need serious internal bracing to accomplish it, not just a double thick front baffle.

http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130204_174835_568_zps2c86c03d.jpg

TheycallmeJT
03-11-2013, 08:29 PM
I get what your saying bro. Its not just resin tho there is 2 layers of matt in every corner and a single layer on the flat surfaces. I do greatly appreciate the input and help and will deff take keep it in mind when I build his next box

captainobvious!
03-11-2013, 08:33 PM
BTW- to the OP: How do you like the new(er) Lancer? I had an '03 and really liked it. Any complaints or things you really like?

Thanks!

---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------


I get what your saying bro. Its not just resin tho there is 2 layers of matt in every corner and a single layer on the flat surfaces. I do greatly appreciate the input and help and will deff take keep it in mind when I build his next box

Hey, in the end if he's happy, thats all that matters ;)

TheycallmeJT
03-11-2013, 08:38 PM
[QUOTE=captainobvious!;8345956]BTW- to the OP: How do you like the new(er) Lancer? I had an '03 and really liked it. Any complaints or things you really like?

It isn't my car. It is my buddies. He's had it for a while and hasn't really had any complaints. Things break real easy tho lol I use to work on them a lot when I worked for Hyundai and I hated both car companies. Easy to take apart and put back together. They do rattle a hell of a lot of you don't deaden.

TheycallmeJT
03-24-2013, 08:11 PM
Sunroof is done for. Broke 2 mounting brackets that hold the glass down. And destroyed the sheet metal and lost a reverse light. He was drivin to work one morn, got out of his car and realized the light was completely gone. Scratched up and pitted the paint pretty bad underneath where its supposed to be
http://i260.photobucket.com/albums/ii10/theycallmejtizle/IMG_20130323_120525_501_zpse55c57df.jpg
http://i260.photobucket.com/albums/ii10/theycallmejtizle/2013032295073045_zpsdfccb10d.jpg

04murdalanche
03-24-2013, 08:28 PM
Lmao **** that's why I call destruction, holy ****