PDA

View Full Version : Sq beast zapco 360.4 clean!!



Wanacustomx
02-07-2013, 03:32 PM
up fs/ft

all new hardware from zapco, very few scratches and the obvious mounting tab scratches.. but the amp has been checked, all terminals, crossovers, filters, inputs, and outputs work flawlessly.. THIS IS TRUE USA MADE... amp is very underrated.
specs are
60x4@4 ohms
90x4@2 ohms
180x2@4 ohms bridged

but it will do a bit more than that.

im looking for a nice D1 or D4 woofer, or two nice D2.. i dont NEED them so i dont want junk.
also looking for a 2 channel amplifer that will do around 200 watts rms on each channel at 2 ohms and also be able to run a HP of about 2khz-5khz.. i was in this amp for about 220$ before i got all the new hardware and everything.. but here it is. i also have some small extras (ring terminals, sound deadener, fuses, fuse blocks) if anybody is interested in a trade for the amp and them.

http://i1008.photobucket.com/albums/af204/wanacustomx/IMAG0517_zpsdfef0b96.jpg
http://i1008.photobucket.com/albums/af204/wanacustomx/IMAG0518_zps41b24a08.jpg
http://i1008.photobucket.com/albums/af204/wanacustomx/IMAG0519_zpscfab9e52.jpg
after i cleaned it up a little
http://i1008.photobucket.com/albums/af204/wanacustomx/IMAG0491_zps5f64400d.jpg
http://i1008.photobucket.com/albums/af204/wanacustomx/IMAG0520_zpse38fa3fc.jpg

mtxfan4life
02-07-2013, 04:32 PM
Very beautifull amp here

Wanacustomx
02-08-2013, 10:09 PM
Bumpski

gckless
02-08-2013, 10:49 PM
Bumpski

What size subs you looking for?

Wanacustomx
02-08-2013, 10:56 PM
Nothin specific like I said I don't NEED them, will be ran off an arc audio ks1200 at 2 ohms so getting about 700 rms a piece

Edit: or about 1400 to 1 woofer

gckless
02-08-2013, 11:00 PM
Nothin specific like I said I don't NEED them, will be ran off an arc audio ks1200 at 2 ohms so getting about 700 rms a piece

Edit: or about 1400 to 1 woofer

I've got a DC Level 3 10". Interested?

Wanacustomx
02-08-2013, 11:01 PM
Send me a pic 8434506455

gckless
02-08-2013, 11:09 PM
You'll get better pics here than my phone:

http://www.caraudio.com/forums/car-audio-build-logs-cars-trucks-suvs/551730-2000-subaru-legacy-b4-2.html

We can talk about a trade for one, or the pair if you want to kick a little bit extra in on your end.

Wanacustomx
02-08-2013, 11:12 PM
Okay imma offer up but I gotta question? Are they dual 4's or 2's.. And I'll throw it out there for ya, I'll do the zapco amp a gallon of spectrum sludge deadener, some ring terminals, and fuse blocks for the pair

gckless
02-08-2013, 11:16 PM
D4's. And I don't really need any of that, was hoping for cash :naughty:

Wanacustomx
02-08-2013, 11:17 PM
Way is the msrp on the lv 3's 180$?? I not really trying to low ball or anything if you think it is.. It's a trade thread so I'm not really trying to pull money outta my pocket at least not a lot... Just tryin to part with what I got. If you understand

---------- Post added at 11:17 PM ---------- Previous post was at 11:16 PM ----------

Lemme know what kinda cash your looking for on top of the zapco amp... This is for my girls setup so be easy on me

Wanacustomx
02-10-2013, 08:08 PM
Bump guys offers fell through lemme know what you guys can offer. Will also trade for cash

cbtennis
02-28-2013, 02:06 PM
I have a Rockford Fosgate T2(Aluminium cap) 12 D2 still stiff has some dings on the dustcap. Interested?