PDA

View Full Version : Best and easiest way to secure enclosure to the floor



ChucklezZ
02-06-2013, 07:37 PM
I have a ranger ext cab. The box is for a single 12 and is going to be in the middle of the rear floor sub up port up. What's the best way to hold it down? also, it 38 hertz tuning too high for an sa12?

neo_styles
02-06-2013, 07:42 PM
L-brackets from a hardware store. If you can find the fancy ones that wrap around the corner, even better so you don't drill into the box itself. Just make sure you use non-conventional screw heads for theft deterrence. Square heads work well.

ChucklezZ
02-06-2013, 09:53 PM
L-brackets from a hardware store. If you can find the fancy ones that wrap around the corner, even better so you don't drill into the box itself. Just make sure you use non-conventional screw heads for theft deterrence. Square heads work well.

Drilling through my floor?

DLP_Customs
02-10-2013, 04:11 PM
Aslong as its not a stupid weird enclousure i have seen double sided velcro used. Aslong as you dont mess with it, it should last a good while.