PDA

View Full Version : Diamond D9 build



caseyarndt
02-03-2013, 08:44 PM
2.18 cuft
tuned to 32.06hz
15"x31"x14.5"
dual 4" PVC ports
http://cdn2.caraudio.com/1/0/1/0/0/1/7/img_20130203_151031.jpg
http://cdn2.caraudio.com/1/0/1/0/0/1/7/img_20130203_150936.jpg
http://cdn2.caraudio.com/1/0/1/0/0/1/7/img_20130203_151016.jpg
http://cdn2.caraudio.com/1/0/1/0/0/1/7/img_20130203_150943.jpg
http://cdn2.caraudio.com/1/0/1/0/0/1/7/img_20130203_162358.jpg
http://cdn2.caraudio.com/1/0/1/0/0/1/7/img_20130203_165912.jpg
http://cdn2.caraudio.com/1/0/1/0/0/1/7/img_20130203_165904.jpg

Let me know what you guys think or any suggestions on building technique for next time.
I will hopefully be carpeting it tomorrow or sometime this week so Ill update it when I do.
Ill probably post a video when its all hooked up too.

kushy_dreams
02-03-2013, 08:56 PM
you sure theres enough mounting dpeth for the sub? It looks like its going to hit the port tubes

caseyarndt
02-03-2013, 09:18 PM
Wow lol thats what I get for changing my design while I was building it without checking the math
It hits the ports!!
Needs about another quarter inch of clearance.
What should I do? Hopefully I can make this box work or ill just sell it and build another.

caseyarndt
02-03-2013, 09:18 PM
Double Post

kushy_dreams
02-03-2013, 10:55 PM
add another baffle

garretttt4
02-04-2013, 12:27 AM
add another baffle

How have I never thought of this!? Lol

DonH
02-04-2013, 01:06 AM
Make an insert on the outside portion on the baffle good sir

slim2fattycake
02-04-2013, 01:28 AM
I would add bracing too.

Boomsday
02-04-2013, 02:01 AM
Hmmm seems small is that before or after displacement?

Sub should be as far away from the ports as possible

Jroo
02-04-2013, 09:42 AM
could you invert the sub?

caseyarndt
02-04-2013, 01:21 PM
2.18 after displacement according to torres calc
I guess i could invert the sub but I would prefer not to.

Dang I think I can use this box for a type r 12 I have.
do you think 2.18 net is too big for a type-r?

caseyarndt
02-04-2013, 01:52 PM
I would add bracing too.

Single threaded rod maybe?

caseyarndt
02-05-2013, 11:06 AM
I decided to use the cutout of the flush mount baffle to make a mounting ring to bring the sub out another 3/4 inch
and it clears the ports.
It's just the outside edges that are within an inch of the PVC, the center is at least 1.5" away from each port.
do you think cooling will be diminished from the sub being that close?

Ronny
02-05-2013, 11:35 AM
It will be fine.