PDA

View Full Version : Help me fit board in my car!



Fireitup
02-03-2013, 12:08 AM
Ok Home Depot near me will only do 2 cuts on 1 4x8 sheet of MDF. I need to know what size those cuts need to be so i can get all of my box out of the sheet and still fit those boards in my car to drive them home.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 33 x 27

Left & Right Sides =
Side 1 = 25 1/2 x 11 3/4
Side 2 = 26 1/4 x 11 3/4

Front = 27 1/4 x 11 3/4

Back = 33 x 11 3/4

L Port Internal Assembly Parts:

Front to Back = 20 1/2 x 11 3/4
Extension = 3 x 11 3/4

edit: Forgot to mention boards can be no wider than 32 in and longer than 72 in

Popwarhomie
02-03-2013, 12:24 AM
Tell them to **** your ****. Lowes will do as many cuts as you need and for free. **** home depot.

Fireitup
02-03-2013, 12:51 AM
Tell them to **** your ****. Lowes will do as many cuts as you need and for free. **** home depot.
Nearest lowes is an hour away :(

Tenacious
02-03-2013, 12:56 AM
Tell them to **** your ****. Lowes will do as many cuts as you need and for free. **** home depot.

Not always. I went to Lowe's and they told me they could only do one cut. The guy was probably just a lazy bastard though.

hispls
02-03-2013, 01:11 AM
Give the kid at the saw 10$ and your cut-list. Total **** tier home depot if they won't do a few cuts for you.

bsipes30
02-03-2013, 01:22 AM
Take your cut list in. Usually they have it where an additional cut is a dollar but I have never had a problem. My home depot and lowes will always cut however many I need. Sometimes the saw isn't sharp... So be careful

pro-rabbit
02-03-2013, 01:25 AM
It you have them do any of your actual cuts, tip the employee to help ensure you get good cuts. I have seen them up to 1/4" off in some cases.

bumppinKota
02-03-2013, 02:07 AM
Ok Home Depot near me will only do 2 cuts on 1 4x8 sheet of MDF. I need to know what size those cuts need to be so i can get all of my box out of the sheet and still fit those boards in my car to drive them home.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 33 x 27

Left & Right Sides =
Side 1 = 25 1/2 x 11 3/4
Side 2 = 26 1/4 x 11 3/4

Front = 27 1/4 x 11 3/4

Back = 33 x 11 3/4

L Port Internal Assembly Parts:

Front to Back = 20 1/2 x 11 3/4
Extension = 3 x 11 3/4

edit: Forgot to mention boards can be no wider than 32 in and longer than 72 in

strap them to the roof!

bumppinKota
02-03-2013, 02:24 AM
Ok Home Depot near me will only do 2 cuts on 1 4x8 sheet of MDF. I need to know what size those cuts need to be so i can get all of my box out of the sheet and still fit those boards in my car to drive them home.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 33 x 27

Left & Right Sides =
Side 1 = 25 1/2 x 11 3/4
Side 2 = 26 1/4 x 11 3/4

Front = 27 1/4 x 11 3/4

Back = 33 x 11 3/4

L Port Internal Assembly Parts:

Front to Back = 20 1/2 x 11 3/4
Extension = 3 x 11 3/4

edit: Forgot to mention boards can be no wider than 32 in and longer than 72 in

now with all seriousness how tall can the be. like could you stand them up instead of laying them flat also i am confused on the top and bottom part. you need 6? 4? OR 2?