PDA

View Full Version : Comps to run active off Zed Draconia II?



seatown1two
02-02-2013, 02:46 PM
Hi I'm currently running MB quart PVL216 off the front channels but I was thinking I want to go active. What would you recommend with the amp (rated at 150x4 @ 4 ohms) I have?? Going into an 05 TL.

Dtrom
02-02-2013, 02:54 PM
I'm bout to be running what's in my signature. That's a good option but what's your budget

Timmy13091
02-02-2013, 02:55 PM
Cdt es line !!!!!![COLOR="Silver"]

---------- Post added at 01:55 PM ---------- Previous post was at 01:55 PM ----------

[/COLOR VertexAudio ;

mylows10
02-02-2013, 03:02 PM
cdt es or hd lines ,either will be fine and sound great with that amp .also if you wanna spend a bit more cash ,look at dls components ,then hit me up for prices on either sets

seatown1two
02-02-2013, 03:17 PM
Haven't really set a budget yet. Just trying to get some different ideas for now.

neo_styles
02-02-2013, 03:55 PM
You'll have a huge advantage of going active in matching your drivers piece by piece. I've been doing similar research and been back and forth on a few ideas. What I think I've decided on are these paired together:

Tweeters:
Vifa XT25BG60-04 1" Shielded Dual Ring Radiator Tweeter 264-1012 (http://www.parts-express.com/pe/showdetl.cfm?partnumber=264-1012)

Woofers:
DIYCable.com : Intro Home Exodus Anarchy (http://www.diycable.com/main/product_info.php?cPath=24&products_id=538&Cid=13ca1403a740b8483850e6a9da04b7f5)
-OR-
Dayton Audio RSS210HO-4 8" Reference HO Subwoofer 4 Ohm 295-458 (http://www.parts-express.com/pe/showdetl.cfm?partnumber=295-458)

There's tons of shootouts on DIYMA for reference and that's pretty much what I'm using. Good luck hunting, but the choices I mentioned above should go great together on that amp.

seatown1two
02-02-2013, 03:58 PM
Ty for the suggestions so far.. Please keep them coming... :D I do have a question tho, most comps are 4 ohms per side (tweet + mid), what is the load my amp is going to see per channel going active? 8ohms?

neo_styles
02-02-2013, 04:06 PM
Without a DMM, it's hard to know. If you start going down the hunt for raw drivers (which is what I'm suggesting), it'll be listed clearly before you purchase. All of my links are for 4-ohm drivers.

mlstrass
02-03-2013, 02:36 AM
Vifa tweets are very nice, but might want to consider the small format version as ring radiators need to be mounted VERY close to on-axis.

and x2 on getting raw drivers. Do some reading on diyma, lots of proven combos for any price range. PE and Madisound should have whatever you decide on...