View Full Version : Car Audio Showroom display with MTI switching system

01-30-2013, 07:28 PM
Hey everybody I recently closed done my car audio business and have my display for sale. The display is very large and in very good condition. The center section houses all the circuit boards and the MTI control panel. Up the 24 radios and 8 seperate amplifers (amplifier configurations are F/R and F/R/S. To both sides of center are 3 pillars with 8 speaker locations in each. All three pillars are wired into the soundboard as a L/R set, giving a end result of 24 pairs of front stage speakers. On the right side of the display is a walkthrough opening and then an additional pillar with 8 speakers. On the left side is another opening the same size as the walkthrough except, the left side has 4 more subwoofer amplifier boards and 4 dedicated subwoofer terminals. Again like the right side an additional pillar with 8 speaker locations. The two rear pillars are wired to the soundboard in a rear L/R set. The entire display seperates into individual pieces but can only be assembled one way, when complete makes about 2/3 of a complete circle. All the wiring is simple plug and play and the whole unit can be completly assembled and working in a couple hours. All of the pillars, walls and center unit are covered in a light tan formica while the connecting bases and tops are covered in dark blue formica. All of the speaker and amplifier plates are covered in grey formica, and use machine screws with nutzerts for easy removal and installation. I am asking $8000.00 and buyer is responsible for shipping. Although I will travel to buyers location to assist with assembly and instruction on how to use if so desired. Thank You for your time

01-30-2013, 07:45 PM
Why does all this stuff have to be so far away :(

01-31-2013, 11:18 AM

01-31-2013, 06:59 PM
The display is disassembled and will fit in a small uhaul or can have a local moving company ship it to you.

01-31-2013, 07:12 PM
Is it all sold together?

01-31-2013, 10:51 PM
Yes the display is complete and sold together.

04-14-2013, 04:04 PM
Still for sale?

If so do you have the MTI Model # so I can look up dimensions, specs..?

I assume it works 100% and comes with power supply(s) --please confirm

How old is the unit? Did you buy directly from MTI (1st owner)

Any MTI warranty left?


08-02-2013, 12:46 PM
Do you still have this display?

08-02-2013, 02:01 PM
Do you still have this display?

On a thread this old PM the guy... He only had 3 posts to begin with. Pretty sure he got on here for the sole reason of selling the display.