PDA

View Full Version : Supporting Vendor JBL P660C Power 6.5" Components



trumpet
01-25-2013, 11:06 AM
Item(s) for Sale:
JBL P660C Power 6.5" Components

Item(s) Description/Condition:
NIB
2 sets available

How do these compare to MS-62C?
You get a midrange with a larger motor for more thermal dissipation and higher power handling. The cone is a hexagonal laminate type which should have minimal flex when the volume is pushed to ridiculous levels. The tweeter is silk rather than titanium. The tweeter hardware gives the option of dialing in the exact angle to aim them, as the hardware is marked in degrees on the back side. The crossovers only have a 0 dB/-6 dB switch for tweeter attenuation, so you don't get quite as much to play with. They're very substantial in weight and overall appearance, very nice.

This auto loudspeaker features some of JBL’s best technology. Its HCL™ woofer cone is exceptionally stiff, yet lightweight for increased efficiency, exceptional midrange clarity and lower distortion at high-output levels. Its oversized voice coils increase power handling while minimizing distortion. Its spider-integrated tinsel leads enhance reliability and eliminate audible tinsel lead slap. Its Plus One™ (patent pending) woofer cones, with more surface area than competing models of the same size, offer increased bass output and increased efficiency. Its computer-optimized, passive crossover has been voice-matched to ensure optimum imaging, clarity and detail. And its high-bandwidth, edge-driven textile dome tweeters provide reduced distortion at high-output levels.


Power handling, RMS 90W
Sensitivity (2.83V @ 1m) 94dB
Frequency Response 45Hz – 23kHz
Impedance 2 ohms
Cone Plus One Honeycomb Laminate (HCL) Cone
Tweeter High-bandwidth, edge-driven, textile-dome tweeter
Crossover Computer-optimized voice-matched outboard passive crossover
Tweeter protection (PTC) Yes
Tweeter-level control Yes
Mounting Depth 2-1/4" (woofer)



Price:
$180 shipped, PRICE IS PER SET, NOT BOTH SETS TOGETHER

Shipping and Miscellaneous Item Information:
free UPS Ground shipping to the Continental US

Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

http://i803.photobucket.com/albums/yy314/trumpet187/CACO/th_p660c_zps9a3ac00f.jpg (http://s803.beta.photobucket.com/user/trumpet187/media/CACO/p660c_zps9a3ac00f.jpg.html)

Slayerx
01-25-2013, 05:11 PM
Great speakers here from a great seller. These are similar to the infinity kappas but the tweeter is much better IMO.

trumpet
01-30-2013, 10:26 AM
bump

trumpet
01-31-2013, 08:28 PM
1 sold, 1 left, no more available to order

trumpet
02-04-2013, 10:36 AM
bump for killer "budget" speakers

trumpet
02-25-2013, 12:46 PM
bump

trumpet
03-27-2013, 10:33 AM
1 set in stock

bradl79
03-27-2013, 02:03 PM
Will an alpine mrp f 300 amp power these. it is 300w peak and 50 RMS

trumpet
03-27-2013, 02:04 PM
Will an alpine mrp f 300 amp power these. it is 300w peak and 50 RMS

Yes, that amp will be fine.

trumpet
04-21-2013, 11:55 PM
bump

trumpet
05-05-2013, 09:45 PM
bump

trumpet
05-24-2013, 11:27 AM
bump

Vancouverman
05-24-2013, 01:40 PM
Ok....Il see your Bump and raise you one since Im here anyway

bumpasauras
05-25-2013, 12:38 AM
I have a set of these running off half of a ppi phantom 900.1 and the other half running a pair of kappas. They have a much "smoother" tweet when compared to the kappas. I am very happy with them.

Glws

hispls
05-25-2013, 02:14 PM
bump

Looking for a component set for a friend. How realistic is that 85W power rating assuming proper HPF?

trumpet
05-26-2013, 07:19 PM
Looking for a component set for a friend. How realistic is that 85W power rating assuming proper HPF?

As with any good component set, they will take rated power all day long with an appropriate high pass filter. Assuming your friend wants to be able to play the music loud, I would go with no lower than an 80 Hz HPF with at least a 12 dB/octave slope. 24 dB/octave would be ideal.

hispls
05-26-2013, 10:08 PM
As with any good component set, they will take rated power all day long with an appropriate high pass filter. Assuming your friend wants to be able to play the music loud, I would go with no lower than an 80 Hz HPF with at least a 12 dB/octave slope. 24 dB/octave would be ideal.

Sounds good. PM me payment info please.

trumpet
05-27-2013, 11:45 AM
inbox is full

Sounds good. PM me payment info please.

hispls
05-27-2013, 01:33 PM
Fixed. Also my username @Comcast.net you can simply send me a paypal invoice.

trumpet
05-27-2013, 09:05 PM
Fixed. Also my username @Comcast.net you can simply send me a paypal invoice.

Thanks, I sent an invoice.

hispls
05-28-2013, 01:19 AM
Thanks, I sent an invoice.

Will pay in the morning. Thanks.

hispls
05-28-2013, 10:56 AM
Thanks, I sent an invoice.

Money sent.

hispls
06-05-2013, 03:21 AM
Got these installed today. I'm quite impressed and my friend is very happy. Definitely great build quality and great sound.

trumpet
01-02-2014, 06:13 PM
bump

trumpet
01-22-2014, 10:43 AM
bump