PDA

View Full Version : Fi BL Fully Loaded 12" w/ 4" coil and Custom AV2 12"!!!



Beerdrnkr
01-16-2013, 08:37 PM
Item(s) for Sale:

12" Fully loaded Fi BL w/ 4" coil. Great sounding sub.

Custom Av2 Underhung Driver + Ti Basket + CF Cone + Copper Coil + TC Spaced Spiders



Item(s) Description/Condition:

Dual 2ohm fully loaded w/ 4" coil. In very good overall condition. There is some rust on the motor as you can see in the pics.

This is the sub Zeuslicious built a while back. Excellent sub and a low end monster!

12" Sub, Underhung Motor Design, Beefy 3" Dual 2ohm RW Copper Coil, Candy Blue Ti Basket w/TC terminals, Dual Spaced TC Soft Spiders with leads sewn in, Rare Carbon Fiber layered Cone with a Nice High Surround similar to the high roll surround and light weight RF Inverted Plastic Cap.
The sub Was Built for daily SQL Application so I'll rate it between 1000 and 1600rms. Daily even more if you know what you're doing.


Price:

$265 shipped.

Zeuslicious wanted $410 local for the AV2. I'll do $350 local or $385 shipped!

I also have a box that I believe is 2.5c/ft birch w/ a pair of side firing aeroports tuned to 32-33hz. If you're interested in the box let me know and I'll give you a local price for it with or without one of the subs.

Trades welcomed but specifically looking for the following:
JL Audio XD600/6, SA8v.2's, 2500-3000wrms amp, processors (bit-one, Rockford 3sixty.3, etc.), or smaller footprint batteries. I can add cash as well as having a few other things for trade.



Shipping and Miscellaneous Item Information:




Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

http://i276.photobucket.com/albums/kk12/beerdrnkr/DSC00969.jpg
http://i276.photobucket.com/albums/kk12/beerdrnkr/DSC00971.jpg
http://i276.photobucket.com/albums/kk12/beerdrnkr/DSC00972.jpg
http://i276.photobucket.com/albums/kk12/beerdrnkr/DSC00973.jpg
http://i276.photobucket.com/albums/kk12/beerdrnkr/DSC00974.jpg

http://i276.photobucket.com/albums/kk12/beerdrnkr/DSC00979.jpg
http://i276.photobucket.com/albums/kk12/beerdrnkr/DSC00978.jpg
http://farm9.staticflickr.com/8516/8359902876_902954306c.jpg (http://www.flickr.com/photos/80041324@N02/8359902876/)
Untitled (http://www.flickr.com/photos/80041324@N02/8359902876/) by Beerdrnkr (http://www.flickr.com/people/80041324@N02/), on Flickr
http://farm9.staticflickr.com/8505/8359903474_7469c2b220.jpg (http://www.flickr.com/photos/80041324@N02/8359903474/)
Untitled (http://www.flickr.com/photos/80041324@N02/8359903474/) by Beerdrnkr (http://www.flickr.com/people/80041324@N02/), on Flickr
http://farm9.staticflickr.com/8227/8359904826_05fd2b050b.jpg (http://www.flickr.com/photos/80041324@N02/8359904826/)
Untitled (http://www.flickr.com/photos/80041324@N02/8359904826/) by Beerdrnkr (http://www.flickr.com/people/80041324@N02/), on Flickr

Beerdrnkr
01-17-2013, 01:59 PM
Prices are negotiable and trades welcomed...

garretttt4
01-17-2013, 02:45 PM
Prices are negotiable and trades welcomed...

What's the sub next to it?

Beerdrnkr
01-17-2013, 02:50 PM
The custom built AV2 12". It was custom built by Zeuslicious on here (check out his threads to see quality of work), sounds great, underhung motor, TC spiders, and gets LOW. They're both for sale in this thread.

garretttt4
01-17-2013, 02:54 PM
The custom built AV2 12". It was custom built by Zeuslicious on here (check out his threads to see quality of work), sounds great, underhung motor, TC spiders, and gets LOW. They're both for sale in this thread.

O I must have missed that. Sorry just looked again and saw it. :P

ArabOnRadar
01-17-2013, 03:37 PM
That av2 is one sick driver.

CerwinVega_Fan
01-17-2013, 03:40 PM
Very nice my man!

DetroitSteel88
01-18-2013, 12:40 PM
Which is better for SQ?

Am extremely interested.

tc300
01-18-2013, 04:52 PM
Does the BL have FI soft parts???

Guyver
01-18-2013, 05:05 PM
What's the best you can do on Av.2?

Beerdrnkr
01-18-2013, 08:22 PM
Which is better for SQ?
Am extremely interested.
They both sound really good but the AV2 gets lower.

Does the BL have FI soft parts???
Yes it does.

What's the best you can do on Av.2?

I'll give u a pm in a second.

blobb454
01-19-2013, 09:15 AM
Box for sale?

Beerdrnkr
01-19-2013, 10:45 AM
Box for sale?

Yes it is.

RangerDangerV2
01-19-2013, 11:16 AM
when did fi come out with a 4" coil bl series woofer?

GreekBrotha8
01-19-2013, 04:57 PM
Can you pm me dimensions on that box and best you can do for that av.2 and box shipped to 96003? Any interests in a partial trade for a 10 inch alpine type x? Still looks minty has mounting gasket and all.

Beerdrnkr
01-19-2013, 10:21 PM
when did fi come out with a 4" coil bl series woofer?
It's a custom option.

Can you pm me dimensions on that box and best you can do for that av.2 and box shipped to 96003? Any interests in a partial trade for a 10 inch alpine type x? Still looks minty has mounting gasket and all.

This is what I was given for the specs on the box and I'll pm you a packaged deal right now: Ok, I have this design together. It's 2.66 cubes of internal airspace tuned to 30 hz. After all displacements (2 3" ports), subs' displacement and bracing displacements, we'll be right. 2.2 cubes. 2 3" aero ports will fire to the side.

Dimensions are 12.75" high, 38" wide, and 13.5" deep. LMK how that'll fit and if that works for you! I may need to do a small amount of adjusting on the dimensions to get your tuning up to 32 hz if you really need it there.

---------- Post added at 06:21 PM ---------- Previous post was at 06:21 PM ----------


when did fi come out with a 4" coil bl series woofer?
It's a custom option.

Can you pm me dimensions on that box and best you can do for that av.2 and box shipped to 96003? Any interests in a partial trade for a 10 inch alpine type x? Still looks minty has mounting gasket and all.

This is what I was given for the specs on the box and I'll pm you a packaged deal right now: Ok, I have this design together. It's 2.66 cubes of internal airspace tuned to 30 hz. After all displacements (2 3" ports), subs' displacement and bracing displacements, we'll be right. 2.2 cubes. 2 3" aero ports will fire to the side.

Dimensions are 12.75" high, 38" wide, and 13.5" deep. LMK how that'll fit and if that works for you! I may need to do a small amount of adjusting on the dimensions to get your tuning up to 32 hz if you really need it there.

DetroitSteel88
01-20-2013, 07:29 PM
Mounting depth on the av2?

and what is the RMS?


Never bought anything off of here before, I am assuming payment is via PayPal?

Thanks,
Brian

Beerdrnkr
01-20-2013, 11:49 PM
Mounting depth on the av2?

and what is the RMS?


Never bought anything off of here before, I am assuming payment is via PayPal?

Thanks,
Brian
I don't have the mounting depth off hand but it's 1500wrms and yes it is via paypal. Let me know if you have any other questions. I'll pull out the sub tomorrow and get the dimensions for you. Thanks

DetroitSteel88
01-21-2013, 02:14 AM
Thank you.

Mounting depth will help.

Had a box made for an old school stroker, but she got stolen and would like to use the box for this application. How much space is *ideal* for this sub? Box is at 2.5 with out considering sub displacement.

Beerdrnkr
01-21-2013, 12:20 PM
AV2 has been sold!


Thank you.

Mounting depth will help.

Had a box made for an old school stroker, but she got stolen and would like to use the box for this application. How much space is *ideal* for this sub? Box is at 2.5 with out considering sub displacement.

Sorry, someone ended up sending me the funds for the AV2 last night and I had to go with whoever first contacted me to be fair. However, the Fi is still for sale. It's also a great sounding sub, the mounting depth is less, it'll easily handle 1500wrms, and it's less expensive. Let me know if you're interested in the Fi. Thanks

Phoenix Risen
01-21-2013, 12:41 PM
AV2 has been sold!

:cool:

Beerdrnkr
01-22-2013, 01:45 PM
:cool:

The AV2 is shipping out today sir!

Beerdrnkr
01-22-2013, 04:58 PM
I just did something that I haven't done in years. While swapping the av2 out with the BL so I could ship it, I punctured the surround on the BL. Still sounds great but I don't have any ca glue to patch it up at the moment. So because of this I'll do $210 shipped on the BL! I'll have a picture up in a few.

http://farm9.staticflickr.com/8511/8406587322_cde0e17fee.jpg (http://www.flickr.com/photos/80041324@N02/8406587322/)
Untitled (http://www.flickr.com/photos/80041324@N02/8406587322/) by Beerdrnkr (http://www.flickr.com/people/80041324@N02/), on Flickr

Beerdrnkr
01-28-2013, 04:30 PM
Bump for the BL!

Wanacustomx
01-30-2013, 10:50 PM
pm'd

Beerdrnkr
01-31-2013, 12:31 AM
PM's returned.

TitoThePirate
01-31-2013, 02:57 AM
how was the bl subjected to rust enabling enviroment?

Beerdrnkr
01-31-2013, 03:25 AM
how was the bl subjected to rust enabling enviroment?

Not sure. I did a trade plus cash for some 8w7's I had and the rust was never mentioned to me.

It's been a great sub though. I'm currently running it off an American Bass PH4000 and it sounds really good. I don't think it can really be beat for the price I'm selling it at considering shipping will easily be $60 or so.

Beerdrnkr
02-07-2013, 09:48 PM
$200 shipped for the BL!

tc300
02-09-2013, 01:21 AM
I never got those pics of what the coils read from you...??

Beerdrnkr
02-09-2013, 08:57 PM
I never got those pics of what the coils read from you...??

Yeah my bad I didn't think you were interested anymore and I never picked up my sub from zeuslicious. I'll be picking it up tonight though.

tc300
02-11-2013, 12:14 AM
Yeah my bad I didn't think you were interested anymore and I never picked up my sub from zeuslicious. I'll be picking it up tonight though.

Yeah I think I'm still interested in it.... Any chance you can get picture of what the coils read?

ArabOnRadar
03-12-2013, 03:33 AM
The BL still around? Ever get coil readings?

infamous_e46
03-12-2013, 05:41 AM
hey luis if u still have the fi let me know how much picked up

tc300
03-12-2013, 06:11 AM
hey luis if u still have the fi let me know how much picked up

Sold awhile ago....