PDA

View Full Version : 01 buick lesabre- 15" fi on aq2200 build



Rainelli
01-11-2013, 09:23 AM
I've been working on this build for about a year now but had to put it on hold for awhile. But im finally able to pick it back up.
Here's what I have in it so far:

15" fi bl fully loaded dual 1ohm voice coil
4 cubic ft custom built box tuned to 33hz ( not the best but works for the time being)
Aq2200d
Big 3 in 1/0 awg knukonceptz cca ( my batterys under my backseat )
for right now 4gauge kicker wire from battery to amp
Kenwood kdc-bt652u
Stinger rcas
Stock alternator
And stock front and rear stage.



And here's what I plan on doing:

Adding another 15" fi bl
Getting a box designed by ryan @ ram designs and built by dylan at dl designs
Planning on 8cu ft tuned to 33hz with a kerfed port 45 angles and rounded edged and a bedliner finish
220a mechman alternator
Adding a kinetik khc16v 1600w
All 1/0 awg knukonceptz cca
Some Aq ts6.5 components up front or maybe some mb quarts
Knukonceptz krystal kable rcas
karma ss 10gauge speaker wire
And some kno knoise sound dampener all over
Ill have some pics of my current set up posted later and ill continue to post pics and vids as I go.
Input and advice is always appreciated

Rainelli
01-11-2013, 06:29 PM
26539027

Rainelli
01-11-2013, 06:53 PM
https://www.youtube.com/watch?v=jEvVmIe_1lQ&feature=youtube_gdata_player

A quick lil video before I tuned my amp.
Ill have a better one later

cdc351jeferson
01-11-2013, 06:56 PM
I've been working on this build for about a year now but had to put it on hold for awhile. But im finally able to pick it back up.
Here's what I have in it so far:

15" fi bl fully loaded dual 1ohm voice coil
4 cubic ft custom built box tuned to 33hz ( not the best but works for the time being)
Aq2200d
Big 3 in 1/0 awg knukonceptz cca ( my batterys under my backseat )
for right now 4gauge kicker wire from battery to amp
Kenwood kdc-bt652u
Stinger rcas
Stock alternator
And stock front and rear stage.



And here's what I plan on doing:

Adding another 15" fi bl
Getting a box designed by ryan @ ram designs and built by dylan at dl designs
Planning on 8cu ft tuned to 33hz with a kerfed port 45 angles and rounded edged and a bedliner finish
220a mechman alternator
Adding a kinetik khc16v 1600w
All 1/0 awg knukonceptz cca
Some Aq ts6.5 components up front or maybe some mb quarts
Knukonceptz krystal kable rcas
karma ss 10gauge speaker wire
And some kno knoise sound dampener all over
Ill have some pics of my current set up posted later and ill continue to post pics and vids as I go.
Input and advice is always appreciated

nice man sounds like a good build . are you going to be getting a voltage regulator for your alt?

Rainelli
01-11-2013, 07:21 PM
Thanks. Its my first "big boy" build. Im not to familiar with a voltage regulator tho. Never really looked into it

cdc351jeferson
01-11-2013, 07:33 PM
cool man just stick with the 12v batteries then if your not getting a voltage regulator. saw you listed a kinetik 16v battery . save your money jsut get 12v

05_ZX636
01-11-2013, 08:01 PM
if you decide to run another 2200d, I am going to list one for sell on here as soon as I can get it out of my car

Rainelli
01-11-2013, 08:05 PM
Ok what size 12v would ya recommend?

martiandancer31
01-11-2013, 08:12 PM
solid so far. Those cars are good fun.

Rainelli
01-12-2013, 04:47 PM
Ok im going to be getting the khc2400 instead.

Rainelli
01-16-2013, 01:38 PM
This is going to be my first big build and I was wanting to start getting into competing but I don't wanna get embarrassed. Is their anything I can do to improve my build or anything. Im always trying to learn as much as I possibly can about car audio

ThatChevyGuy
01-16-2013, 03:10 PM
This is going to be my first big build and I was wanting to start getting into competing but I don't wanna get embarrassed. Is their anything I can do to improve my build or anything. Im always trying to learn as much as I possibly can about car audio

i had a 99 intrigue and there was this thick black mat on the back of the rear seats, i cut that off and cut out the plastic portion of the rear arm rest so when its down there is a vent, i gained a lot...

wickedwitt
01-16-2013, 03:13 PM
Got a guy local w/ a Fi SP4 15" in his Lexus. Tuned to 32 and sounds beautiful. GL w/ build.

Rainelli
01-16-2013, 03:15 PM
I don't have a arm rest in the back and my back seat doesn't fold down I was thinking about cutting a hole in my rear deck to help vent. I also saw someone on here talking about removing the 6x9s

T.I.K.
01-16-2013, 03:20 PM
I don't have a arm rest in the back and my back seat doesn't fold down I was thinking about cutting a hole in my rear deck to help vent. I also saw someone on here talking about removing the 6x9s

Yeah, remove your 6x9's and leave the grills. Rear fill is for homos.

Rainelli
01-17-2013, 08:47 PM
Yeah, remove your 6x9's and leave the grills. Rear fill is for homos.

Lol. It wont make a difference in sq?

Rainelli
02-09-2013, 02:52 PM
Ok quick lil update
Im replacing my current h.u. with a kenwood kdc x996
Instead of a kinetik bat im going with a xs power d3400
and also instead of a mechman alt im going with a singer 250a
Almost everything is ordered just waiting on the mail now

I just re ran my wire from my alt to my battery( under my backseat )
It was running under the car but I didn't really trust it their so I ran it through the firewall. Yea that was a big pain in the ***.

Also im going to be removing my rear 6x9s and sound dampening my trunk
Should I also dampen my the back of my back seat?