PDA

View Full Version : DC Audio Spring Build Enclosure Ideas



Bostonjlguy
12-28-2012, 10:59 PM
I'm going to be running 3 Dc Level 4 12's on a DC 5K in the spring. These are going in a trunk! I can do 6 cubes; however DC recommends 4.5 cubes. I am trying to figure out if subs back port back or subs back port out the side would be best. I really don't want to fire everything into the cabin because I don't want to mess with sealing off the trunk. The seats fold down. Opinions are welcome! I am double baffling, bracing and using fiber glass resin.

gckless
12-28-2012, 11:04 PM
Is that 6 cubes net or gross?

cdc351jeferson
12-28-2012, 11:09 PM
I got subs and port back in my trunk it gets nasty

Bostonjlguy
12-28-2012, 11:13 PM
Is that 6 cubes net or gross?
I can do 6 cubes after all displacements.

mylows10
12-28-2012, 11:15 PM
would do no more than 1.75 each sub

gckless
12-28-2012, 11:15 PM
I can do 6 cubes after all displacements.

****, that's a big trunk. What car? But sub/port back should do pretty well.

Bostonjlguy
12-28-2012, 11:28 PM
****, that's a big trunk. What car? But sub/port back should do pretty well.

its an 04 Grand Prix. They are wide cars. I can do 40 wide by 15 high by 36 deep. I like too stay around 14 high because it makes it easier to get the box in and out of the trunk.

---------- Post added at 09:28 PM ---------- Previous post was at 09:28 PM ----------


would do no more than 1.75 each sub

You think 1.5 would be best?

mylows10
12-28-2012, 11:30 PM
thats what dc recommends

Bostonjlguy
12-28-2012, 11:42 PM
I was just thinking I can't do sub back port back. I would have to do port out the side! Any opinions?