PDA

View Full Version : Bit of help on a new door build



john253a
12-28-2012, 02:45 AM
I'm doing a new build for my doors
And I'm tossing up between 3 setup but learning toward the first 2

What I'm looking at is all by Rockford fosgate

2x t1675 6.75"components @2ohm
1x pp48 8" midbass
In each door on a T800.4
75rms to each t1(150rms per door), and 150 to 8" midbass

Or
3x T1675 @1.33ohm per door
On a t1000.4
Only using 2ch(others used else where)
@ 250rms per door 83rms each t1

Or
2x t2 6.5" components @2ohm on t1000.4
250rms per door 125rms each t1

gckless
12-28-2012, 02:48 AM
I see 3 setups? Also, have you purchased equipment and/or are you set on buying RF?

I don't think a 4 channel will like lower than 2 ohms per channel. Is the amp rated for 2 ohms x 4?

mlstrass
12-28-2012, 04:53 AM
why RF junk, much better out there....

john253a
12-28-2012, 05:33 AM
the t800.4
150x4@4ohm
150x4@2ohm
200x4@1ohm

the t1000.4
250x4@4, 2 and 1ohm

as for why rf
1 is warranty, and i can claim local and dont have to ship back to usa (costing more the item itself)
2 price, when your dropping 120 just to freight 1 set of speakers, you dont want to be shipping $50 ones
3 price the t1 are on sale for 109us and are 700 over my way

as for what i have the answer is zero, i have nothing
im starting from the start with all new equipment,

and as its in a 4door truck im limited to 0.5gross behind my rear seat for subs
so idd either get the t800.4 and a t500.1, or just the t1000.4
and run 2 sealed 8" behind there

im just trying to get the best front stage i can get as ill have very little bass coming from 2 shallow mount 8" in a tiny box

john253a
12-29-2012, 04:28 AM
If you know of something else is the price that will preform better let me now

My other ride has kicker 1x QS65.2 in all 4 doors active on a zx700.5 and zx650.4 (4door truck)
And I want it louder an clearer then that
And that had 2x cvt84 8" and 1x cvt122 12" (8's on zx700.5 and 12 on zx400.1)

mlstrass
12-29-2012, 05:28 AM
So why do you need that much front stage for 2 8" shallow mount subs is my next question? Your mids/highs will easily drown out the subs....

Buy one good set of 2 or 3way comps and be done with it

john253a
12-29-2012, 05:40 AM
i like music loud, is one resin
and im not bulding a stage to keep up with anything
the front stage will be everything

the 2 8" are only there to what the front stage can't

i was even thinking of 2x 10" IB in the front door with the 2 comps
but the depth is a problem