PDA

View Full Version : Supporting Vendor adjustable aeroports



psychoacoustics
12-20-2012, 07:43 PM
figure id bring these to ca.com

this isnt some PVC port its so much more than that they are stronger lighter and far more usable

any size or length from 3-48" in diameter in 1" increments i can do 3,4 and 6" like psp but its a lot more to buy one of mine honestly unless your looking for the adjust-ability buy one of them id hate to see you spend the money needlessly

now if you want a 5" 7" or 9" that's where my port fits in

the 6,8 and 10" pvc is a very cheap alternative also

here is where my port stands out its infinitely adjustable in length as long as the tubes are there


i can make them from steel aluminium or stainless

the flare radius gets bigger as the diameter gets larger to help with laminar airflow
6-10" is a 2" radius
11-15 is 3" radius
16+ is 4" radius

there is a 1" mounting flange that comes standard on them on both ends
i can remove the inner one so it slips through the hole

the adjust by one pipe sliding inside of the other pipe so the extended length is roughly double the compressed length

they can also be made NON ADJUSTABLE at a lower price



here are measurements of them standard i can make alterations to them in really any way you can imagine oval shape flares curved pipes bends triangle port i can do that !

if you arent sure what size port you need post the box size and woofers you have and i can help with sizing

here is a quick port area cheat sheet if you have a box program this shoud help

4" 12.59 sq"
5" 19.62 sq"
6" 28.26 sq"
7" 38.46 sq"
8" 50.24 sq"
9" 63.58 sq"
10" 78.50 sq"
11" 94.98 sq"
12" 113.04sq"


here are the OUTSIDE DIAMETER of the flares
port size /OD flare size including mounting flange
4" 9"
5" 10"
6" 12"
7" 13"
8" 14"
9" 15"
10" 16"
11" 19"
12" 20"



pricing DOES NOT include shipping i can quote through UPS it all shipping will include full replacement insurance for the cost of the port and shipping just in case its crushed lost stolen or not delivered for some reason your covered


if you are looking at the shipping for your self they will ship from 14120 NY and they will be roughly 2" larger than the outer dimensions of the port for packing materials

i can drill mounting holes as many as you want and also provide mounting screws

they can be left bare
basic spray paint finish
finished like a car with bondo and automotive paint
or the stainless can be polished

costs are as follows :
4" 60$
5" 70$
6" 85$
7" 100$
8" 120$
9" 135$
10" 155$
11" 175$
12" 200$

for anything besides the normal adjustable straight round port ask some questions i love to chat about this and will help design a box or port area requirements

http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/th_VID_20120228_091417.jpg[/URL]
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2012-10-12_14-46-45_235.jpg
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/IMG955031.jpg
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/IMG_20120621_121259.jpg

[url=http://s232.beta.photobucket.com/user/psychoacoustics/media/aeroports/38inchaero.mp4.html?sort=3&o=17]38inchaero.mp4 video by psychoacoustics | Photobucket (http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/VID_20120228_091417.mp4)
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/th_adjustableaero.jpg (http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/adjustableaero.mp4)
[URL=http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/VID_20120228_091417.mp4]


here is the biggest one ive done to date a 19" internal diameter
http://i232.photobucket.com/albums/ee266/psychoacoustics/2012-12-16_18-16-39_942.jpg

if you have any questions ask them here for everyone's benefit

they have been tested to not resonate audibly they are stronger than pvc and wood but if you feel it will be a problem i can include deadener in matt or paste format of my own formula

they have been used in a world record car last year at iasca finals
i have plenty of references of people that have used them if you need to talk to a proud owner ask ill get ya in touch with them

mat3833
12-20-2012, 08:58 PM
hmm, can you make any bends in them? these are **** and almost make me want to run aeros in my next build. unfortunatly ill have to model to find out how small of an aero is comparable to a 1"X12.5" slot port ~30 inches long. lol

Matt

psychoacoustics
12-20-2012, 09:01 PM
yes any radius and angle you wanted pretty much if you can think it ill build it

a 1x12.5 port would be a bad idea its too long and narrow but thats 12.5 square inches a 4" diameter pipe is equivalent to that

mylows10
12-20-2012, 09:13 PM
nice ports bill, may have to get one soon ,maybe 2 8" ports for my next build

mat3833
12-20-2012, 09:15 PM
the port isnt optimal, but it models well and it the only way i can get the tuning i want with the size box i have. andthe aero would essentially have to be bent like this:

Edit: might have to step up to a 5" port. i plan to be playing as low as 18hz and port noise *****.

Matt

rebelfromva
12-21-2012, 04:33 AM
I'm looking into an 11" one Bill. Will be for 2 custom hdc3 12s. How high or low on tuning could it be adjusted to?

psychoacoustics
12-21-2012, 06:48 AM
That's great give me a few days and ill check shipping might be different depending on if I put them in one box or not

psychoacoustics
12-21-2012, 06:52 AM
the port isnt optimal, but it models well and it the only way i can get the tuning i want with the size box i have. andthe aero would essentially have to be bent like this:

Edit: might have to step up to a 5" port. i plan to be playing as low as 18hz and port noise *****.

Matt

I could do that but I'm gonna need a length to get an idea what u need. Not sure high tight the 5" 180* bends could get

Keep going on this one we will need to iron out the details a bit.

Bettr n' Revrse
12-21-2012, 07:02 AM
Nice

psychoacoustics
12-21-2012, 07:04 AM
I'm looking into an 11" one Bill. Will be for 2 custom hdc3 12s. How high or low on tuning could it be adjusted to?


That's not enough info to answer the question

How many cubic foot is the box?
Do you want it internal? If so how long is the dimension of the box from the side you want the hole on to the opposite wall?

If external are there trunk boundaries or seats that will get in the way?

psychoacoustics
01-16-2013, 09:01 AM
did an oval on e recently what you guys think?

OVAL PSYCHO AEROPORTS Photos by psychoacoustics | Photobucket (http://s232.beta.photobucket.com/user/psychoacoustics/library/aeroports/OVAL%20PSYCHO%20AEROPORTS)

vetkilr
02-15-2013, 10:39 AM
Dang man cool port and nice box setup also...

psychoacoustics
02-16-2013, 01:59 PM
thanks..... just did 2 8"x24" solid ones last nigh

http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-02-15_19-57-48_139.jpg

http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-02-15_19-57-48_139.jpg
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-02-15_19-57-37_13.jpg

psychoacoustics
03-30-2013, 09:08 AM
not sure whos seen these or who im friends with on facebook but here are some things im working on


in these pics there are 2 prototypes ports the one on the left is a 6" the one on the right is an 8"

the left is a super high power it has a very large radius flare rate for ultra low turbulence

the right is for tight clearances such as trunks and crx's that cant break the window line
both have nearly the same mounting size ones almost 12"

i will be offering these in all the same sizes as ive been doing so 3,4,5,6,7,8,9,10,11,12....19.....all the way to 48"

http://i232.photobucket.com/albums/ee266/psychoacoustics/2013-03-28_19-01-00_559.jpg

http://i232.photobucket.com/albums/ee266/psychoacoustics/2013-03-28_19-01-07_682.jpg

http://i232.photobucket.com/albums/ee266/psychoacoustics/2013-03-28_19-01-29_708.jpg

psychoacoustics
03-30-2013, 09:11 AM
this is truly amazing nearly a 3 db improvement just by adjusting the length

How to GAIN nearly 3db in a few seconds..........*Psychoacoustics* - YouTube (http://youtu.be/SPaZ1sh2y1E)

psychoacoustics
05-09-2013, 11:58 PM
im going to try a copper port soon who wants to see that ?

Timmy13091
05-10-2013, 12:01 AM
im going to try a copper port soon who wants to see that ?

Pm'd

psychoacoustics
05-22-2013, 03:25 PM
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-03-28_19-01-07_682.jpg (http://s232.photobucket.com/user/psychoacoustics/media/aeroports/2013-03-28_19-01-07_682.jpg.html)

psychoacoustics
05-27-2013, 10:14 PM
im going to have my website up really soon and would like to get any info from users of my ports

any thing literally good bad indefferent

also pics would be great id like to get a killer photo album on there

videos will add bonus points

OTHER CREATIVE THINGS WILL ALSO BE A BONUS

if you have any pics or videos or scores from any sanctioning bodies (dbdrag iasca meca usaci.....) id love a link to them

ill be giving a 4 tshirts away to the 4 best submittals

http://i232.photobucket.com/albums/ee266/psychoacoustics/976156_568676956489192_706262517_o.jpg (http://s232.photobucket.com/user/psychoacoustics/media/976156_568676956489192_706262517_o.jpg.html)

pleas eemail me the following things to be considered

competition results are NOT required and will not affect the decision if you dont have them !


REAL NAME:
SCREEN NAME ON FORUMS:
FACEBOOK TWITTER /SOCIAL MEDIA PROFILE IF YOU HAVE ONE:
PORT SIZE:
ADJUSTABLE :Y/N
SUBS:
AMPS:
OTHER EQUIPEMENT:
SCORES:
LEAGUE:
LINK TO SCORES TEAM NAME IF U HAVE ONE:
AMOUNT OF INCREASE IN SPL YOU HAD WITH A PSYCHOPORT IF ANY LOL: (I HOPE YOU DID)
PICTURES:
VIDEOS:

TO

[email protected]

psychoacoustics
06-19-2013, 11:49 PM
so ove been working on getting a logo design that permenant paint wont do stickers dont stick

SOOOOOO i tried sandblasting

check out these pics and video

it shows great under the light
wont wear off
and you cant feel it when you touch it so it wont affect airflow

psychoacoustics new port designs - YouTube (http://youtu.be/-zc05rnCvVc)

a test of the new branding technique - YouTube (http://youtu.be/K9CEAtqbs6Q)


some pics of me testing a stencil out
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-06-19_17-24-44_415.jpg (http://s232.photobucket.com/user/psychoacoustics/media/aeroports/2013-06-19_17-24-44_415.jpg.html)
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-06-19_17-19-31_944.jpg (http://s232.photobucket.com/user/psychoacoustics/media/aeroports/2013-06-19_17-19-31_944.jpg.html)
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-06-19_17-32-14_516.jpg (http://s232.photobucket.com/user/psychoacoustics/media/aeroports/2013-06-19_17-32-14_516.jpg.html)
http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/2013-06-19_17-32-09_775.jpg (http://s232.photobucket.com/user/psychoacoustics/media/aeroports/2013-06-19_17-32-09_775.jpg.html)


should i paint them or just the sandblasting ?

psychoacoustics
08-28-2013, 01:18 AM
just bringing this back up i haven't been on here in a while


keeping strong building them all the time and working on the 8.5" for terry brocks

here is some video of it im sorry i **** at videos

8.5" super adjustable port extra footage - YouTube (http://youtu.be/DA5E71FzeU4)
8.5" super adjustable port - YouTube (http://youtu.be/V-eVqSsn6uw)
8.5" super adjustable walkaround - YouTube (http://youtu.be/TSpuqyyMVbM)

phemps
08-28-2013, 01:35 AM
how are people generally mounting these? drilling holes in the flange? cool product man im gonna see if i could make one work in my next box build

psychoacoustics
09-02-2013, 06:04 PM
woofers and ports

http://i232.photobucket.com/albums/ee266/psychoacoustics/aeroports/IMG_20130901_165911.jpg (http://s232.photobucket.com/user/psychoacoustics/media/aeroports/IMG_20130901_165911.jpg.html)

psychoacoustics
11-29-2013, 10:42 PM
websites up and running

psychoport (http://www.psychoport.com)

winkychevelle
11-29-2013, 11:38 PM
Just an idea but if ypu polished the outter lip then etched it it would show up alot better.

And an acrylic like fingernail polish might also be more durable than the typical paint avaliable

psychoacoustics
11-30-2013, 12:19 AM
yea id love to do a polished stainless one but its a hell of a lot of work

actually i did this again and it looked better but my dumb *** didnt get pics

id actually like to do a copper one and pettina it too