PDA

View Full Version : box building programs



droppindimes
04-11-2004, 04:09 PM
Where can i get one... and what is the rating of it?

droppindimes
04-12-2004, 10:03 PM
no one uses a box building program?

monte_carlo97
04-12-2004, 10:10 PM
Winisd is a common one, type it in the seacrh bar of yahoo or something. Don't know how to use it but i heard it works well so good luck with it

nweibley
04-12-2004, 10:11 PM
LEAP is like a grand... but it is pretty much the best there is available to us consumers.

droppindimes
04-12-2004, 10:12 PM
ive heard of something like box builder pro but i dont really have to much info on it...

monte_carlo97
04-12-2004, 10:12 PM
oh yea unibox is another

droppindimes
04-12-2004, 11:04 PM
anybody know anything about box builder pro?

monte_carlo97
04-13-2004, 01:58 PM
Where can you Get leap i have never heard of it before

nosaj070
04-13-2004, 02:22 PM
I forget the site, but maybe you missed the part that LEAP is 1000 bucks. Bass Box pro is sixtyish, search google for it. IMO WinISD ***** for everything except drawing response curves.

misterio
04-13-2004, 02:39 PM
ive got bass box pro but then again i downloaded it for free off shareeza and it comes with a serial number... illegal but free
its a good box building program all you do is type in the dimensions you want it to be outside and it gives you instructions on how to cut every single piece for the box, i made my first box and it looks real good and professional and cost me like 25 bucks to make including
1 4' x 8' mdf 3/4" board $17.00
1 Liquid nails $2.00
1 box of drywall screws 1 5/8" $3.50

total ~ 25.00

Bill T.
04-13-2004, 05:56 PM
I forget the site, but maybe you missed the part that LEAP is 1000 bucks. Bass Box pro is sixtyish, search google for it. IMO WinISD ***** for everything except drawing response curves.

The port length is pretty **** close... if you use the right surface area. Otherwise, it does nothing more than port length and response curves.

Btw, how accurate is the response graphs?

Bill T.

DBfan187
04-13-2004, 06:08 PM
winISD does ****. It always tells me that I need a box like 30^3 tuned to 24Hz and a port length of 2.12"!

Trixter
04-13-2004, 07:02 PM
winISD does ****. It always tells me that I need a box like 30^3 tuned to 24Hz and a port length of 2.12"!

LOL! I have come to the same conclusion...WinISD is not good at all. I could come up with a more accurate port length by guessing....or doing a 2min. math equation.

misterio
04-13-2004, 08:10 PM
ill put that program up on my website soon for all you guys that want that bass box pro for free

monte_carlo97
04-13-2004, 08:23 PM
The question is, is it easy to Use?????

78nova
04-13-2004, 08:31 PM
ill put that program up on my website soon for all you guys that want that bass box pro for free
what is your website and does bass box pro give accurate port length for slot ports, also does anybody know if this is correct tuning for slot ports www.loudspeakers101.com/VentCal1.htm

thanks

Trixter
04-13-2004, 08:46 PM
also does anybody know if this is correct tuning for slot ports www.loudspeakers101.com/VentCal1.htm

thanks

I believe it is. I have run the numbers and it was dead on with the formula I used.

DBfan187
04-13-2004, 10:26 PM
for real, what's the website addy?

misterio
04-13-2004, 10:29 PM
the answer is ....... yes

DBfan187
04-13-2004, 10:38 PM
Are you going to tell us your web addy misterio?

jcash1995
04-13-2004, 10:39 PM
Hey misterio! If it gets me away from WinIsd, I want a copy too!! PLEASE.

Acidburn
04-13-2004, 11:53 PM
misterio... me too please? :)

nweibley
04-14-2004, 12:35 AM
Ok, I'm going to put a link up of a copy I just downloaded from eMule for ONE DAY. ONE DAY! Get it while it is hot. After that, I don't want the huge draw this is going to put on my server.

Each download is logged and managed, you must get a unique ID to download it and each ID expires in 5 minutes, so after I delete this tomorrow, it is GONE! G-O-N-E GONE!
http://www.e-techcorp.net/download.php?file=APP%20-%20Bassbox%20Pro%20v6%20(Speaker%20Box%20Designer) .rar

For the record, I'm not a huge fan of BBP anyways

tommyk90
04-14-2004, 12:41 AM
****, i downloaded it but it won't let me open it.

nweibley
04-14-2004, 12:42 AM
http://download.com.com/3000-2250-10007677.html?part=113677&subj=dlpage&tag=buttonYou need WinRAR, it is like winzip... but not ;)

tommyk90
04-14-2004, 12:48 AM
Ok, got it open, now how the hell do i use it.

nweibley
04-14-2004, 01:11 AM
I just got it tonight too, so I am not the greatest at it, but it seems fumbly and poorly laid out.

tommyk90
04-14-2004, 01:18 AM
I just got it tonight too, so I am not the greatest at it, but it seems fumbly and poorly laid out.

I cant even get to anything that resembles anything to do with building a box. What file are you in?

DBfan187
04-14-2004, 02:11 AM
YAY! I finally got it after 1.5hrs. @#$%&*$%#$$$#$@#%$#%&%*@ 56k! grrr

droppindimes
04-14-2004, 03:00 PM
ahhh what do i use for the serial number?

DBfan187
04-14-2004, 03:05 PM
It's in a text file in the folder after you unzip it. I won't post it, but if you have AIM, hit me up and I'll give it to you!