PDA

View Full Version : Noob here to the site.



fochops
11-15-2012, 10:21 PM
I've been attempting car audio for the past 15yrs. Some outstanding results some not so good! Haha

Bettr n' Revrse
11-15-2012, 10:23 PM
What are you running?

kat_black181
11-15-2012, 10:23 PM
Welcome!

gckless
11-15-2012, 10:23 PM
Welcome. Much to learn here, and don't take anything too seriously.

Dtrom
11-15-2012, 10:29 PM
Welcome. To hell.

Jes 42
11-15-2012, 10:31 PM
welcome

Dirtrider4eva
11-15-2012, 10:32 PM
welcome.
please turn around for us sir. itll feel a little cold.

fochops
11-15-2012, 10:47 PM
I just sold my 99' suburban running a Pioneer HU, 3 sets of 6.5 JL components, JL slash series 400/4 & 500/1, 2 JL 13w3v3's in a vented enclosure. Sorry dont have any pics. Thing pounded hard and clean, and was extremely well balanced! i just posted a question w/o a response yet. Maybe you could help? I'm starting a smaller system in my 4runner.

fochops
11-15-2012, 10:52 PM
The question is that i have factory enclosure specs on my Kenwood 12 I will be using. I am again running ported do to effiency but dont want the thing to take up the whole rear of my 4runner. so my dimensions will differ drastically from the factory enclosure specs but I will end up with the same airspace (2.0 cubic ft) can i use their dimensions for the slotted vent? Their vent is tuned to 34hz I believe which is right where I want to be...

Bettr n' Revrse
11-15-2012, 10:54 PM
The question is that i have factory enclosure specs on my Kenwood 12 I will be using. I am again running ported do to effiency but dont want the thing to take up the whole rear of my 4runner. so my dimensions will differ drastically from the factory enclosure specs but I will end up with the same airspace (2.0 cubic ft) can i use their dimensions for the slotted vent? Their vent is tuned to 34hz I believe which is right where I want to be...

It greats depends on the specs... There are many builders and designers here that could help

fochops
11-15-2012, 10:58 PM
Basically my enclosure will be running on the passanger side rear going over the wheel well. It will effectively look like an "L" laying on its side. Does that make sense?

Bettr n' Revrse
11-15-2012, 10:59 PM
Basically my enclosure will be running on the passanger side rear going over the wheel well. It will effectively look like an "L" laying on its side. Does that make sense?

Yes...

fochops
11-15-2012, 11:06 PM
Any ideas if the vent specs will work? Here are the stock specs... http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Consumer/Manuals/KFC-W3013PS.pdf

audiobaun
11-15-2012, 11:44 PM
Welcome to the site..Hope that you enjoy..Alot has changed in 15yrs, for sure:)

audiobaun
11-15-2012, 11:48 PM
i wonder if an Aero port would do more justice??Something Id ask about from one of the builders..its an option for you

fochops
11-16-2012, 12:11 AM
What is an Aero port?

fochops
11-16-2012, 12:19 AM
nvmnd, I just looked it up. Seems like a great idea! how would I tune my box to 34hz with one?