PDA

View Full Version : Need help Designing box!



screwgreen
11-14-2012, 02:50 PM
Finally got the console out of my truck and the max dimensions for my box are 15 wide,20 long, and 18inches tall. I have a sundown Z v.2 12 thats going in it and what do yall think I should do as far as sub and port placement. Ive tried doing slots in torres but I never can get it tuned down to 32 like I want. Please help. Here is a pic of the space. Ive talked to some of the vendors here about making one, but I have a few extra things I want on the box and it will be easier for me to add them.
http://i1111.photobucket.com/albums/h479/screwgreen/20121113_202745.jpg

OmegaBunny
11-14-2012, 02:56 PM
What about using a 4" aero. Box could be roughly 2.25 ft ^3 tuned to 32 with a 4" aero roughly 13" long. If my math is correct.

OmegaBunny
11-14-2012, 02:57 PM
I don't know what configuration would be best but you could do sub forward port back, sub back port back, sub up port forward or back etc. Aero port to the side would be hard because of the length.

dbeez
11-14-2012, 03:13 PM
I would fire sub down and port forward or back I think it would do pretty well that way.

screwgreen
11-14-2012, 03:14 PM
yeah I have a 4inch aero just laying here that I would like to use but I dont know how to get it in there without causing unloading issues.

Im not totally against downfire but for enough room
between the floor and the sub for excursion, I would be loosing alot of volume because then the actually enclosure would only be like 15 inches tall.

screwgreen
11-15-2012, 12:38 AM
bump