PDA

View Full Version : FS: Copper bars...I will add more as I get more.



jockhater2
11-06-2012, 06:59 PM
Item(s) for Sale:

Number 1 copper bars. Pureness = 99.7% + usually there 99.9% (they are cut from cathode which is 99.9%)


Item(s) Description/Condition:

just random cut pieces


Price:

Depends on the size/weight of the bar

$30 a bar for the 2lb 10" L ones (3)
$20 for the 1lb 8 3/4" L one (1)
$40 a bar for the 2lb 6oz 13 1/4"L ones (2)
$25 for the 1lb 14oz 10 1/4" one (1)



a really nice set of sub RCA's. Anything that is shielded. I am looking at getting the KNU konceptz for $80

I would also trade for a ipod classic 80GBs-160GBs
Monster Beat Solos for my fiance
Idk. throw some stuff out there




Shipping and Miscellaneous Item Information:

small flat rate USPS box or whatever is cheapest
You pay shipping. In a flat rate it should never be more than $6 I think


Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).



**Note all copper bars will not be the same size. It is just random cut pieces.**

Here is what I got so far.


http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_112344.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_112319.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_112256.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133330.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133320.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133306.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133253.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133236.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121108_111026.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121108_110952.jpg

jockhater2
11-07-2012, 10:54 AM
No one is interested?

jockhater2
11-07-2012, 09:17 PM
bump. i can't believe there isn't any interest in these.

alec14
11-08-2012, 11:04 AM
how much for like 2 pieces?

jockhater2
11-08-2012, 01:15 PM
how much for like 2 pieces?

depend which ones. Which ones were you thinking? Also. I am posting 3 more bars i have.

Chriszle
11-08-2012, 01:16 PM
Why not post the prices with the pictures so we know?

pro-rabbit
11-08-2012, 01:19 PM
You will need to post some kind of price per the rules.

jockhater2
11-08-2012, 01:24 PM
Why not post the prices with the pictures so we know?

ok there up

---------- Post added at 11:24 AM ---------- Previous post was at 11:24 AM ----------


You will need to post some kind of price per the rules.

you got it boss. there up

pro-rabbit
11-08-2012, 01:26 PM
ok there up

---------- Post added at 11:24 AM ---------- Previous post was at 11:24 AM ----------



you got it boss. there up

Nice, not to bad on price. If you ever find some longer 2" wide 1/4 - 1/2 thick sections let me know. I stock up on it as we build our own distros and such here.

SourDeez
11-08-2012, 01:29 PM
What would these be used for? buss bars?

jockhater2
11-08-2012, 01:30 PM
Nice, not to bad on price. If you ever find some longer 2" wide 1/4 - 1/2 thick sections let me know. I stock up on it as we build our own distros and such here.

we have 1,000s of lbs of them longer at work that are silver plated. but I can't have any that heavy. :( I've asked if I could buy them at work but didn't get an answer. Maybe I will ask again. I have been there a year...so maybe I will ask again.

I can literally find some that go up to probably 3ft long and are about 1ft wide.

jockhater2
11-08-2012, 01:31 PM
What would these be used for? buss bars?

Yes. Or a distro block for your front battery. Here is what I used them for in my car.

http://i1259.photobucket.com/albums/ii542/jockhater2/Volkswagen%20MkII%20Build/IMG_0269.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/Volkswagen%20MkII%20Build/IMG_0275.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/Volkswagen%20MkII%20Build/IMG_0276.jpg

southernboom88
11-08-2012, 01:34 PM
this interest me, i buy gold and silver here and there. been known to scrap some copper wire and piping in the past. what makes these worth more then the price of scrap copper? (think its around $3 per LB scrap in GA) not trying to bash you or nothin, just wondering if i need to buy copper bars when i see them lol

edit: nvm, im seeing that in "bar" forum they are worth the higher price over scrap... sry...

jockhater2
11-08-2012, 02:16 PM
this interest me, i buy gold and silver here and there. been known to scrap some copper wire and piping in the past. what makes these worth more then the price of scrap copper? (think its around $3 per LB scrap in GA) not trying to bash you or nothin, just wondering if i need to buy copper bars when i see them lol

edit: nvm, im seeing that in "bar" forum they are worth the higher price over scrap... sry...

I have silver too :) 41 clean silver 1oz rounds. The dollar is so weak that I put some money into silver.

yeah these are worth $10 a piece roughly in scrap price.
These bars are cut from other machined copper. All these bars came out of a barrel of No.1 copper. Which is guaranteed to have a pureness of 99.7%. But at work we usually find that they are 99.9%

southernboom88
11-08-2012, 02:23 PM
thnx for the info, and im with ya, the american dolla is getting weaker every day it seems. atleast if i am forced to leave this place, gold silver ect will be worth just as much if not more elsewhere.. can we get back to trading animal furr too? lol

alec14
11-08-2012, 03:14 PM
depend which ones. Which ones were you thinking? Also. I am posting 3 more bars i have.

maybe about 10 inches long or so. kinda looking for 2 bars to maybe do something like you have going with your system. how much would a couple pieces like that be?

jockhater2
11-08-2012, 03:38 PM
maybe about 10 inches long or so. kinda looking for 2 bars to maybe do something like you have going with your system. how much would a couple pieces like that be?

$30 a bar for the 2lb 10" L ones (3)
$20 for the 1lb 8 3/4" L one (1)
$40 a bar for the 2lb 6oz 13 1/4"L ones (2)
$25 for the 1lb 14oz 10 1/4" one (1)

jockhater2
11-08-2012, 03:42 PM
thnx for the info, and im with ya, the american dolla is getting weaker every day it seems. atleast if i am forced to leave this place, gold silver ect will be worth just as much if not more elsewhere.. can we get back to trading animal furr too? lol

exactly. the dollar is just paper. exactly why precious metals is where its at. It all started going down hill when President Woodrow Wilson signed the federal reserve act on December 23, 1913. If you follow history. We had no debt before that. And since then, the debt has been growing ever since we put the federal reserve in charge of the money.

jockhater2
11-08-2012, 03:44 PM
This is a quote from TaylorFade


FYI - Aluminum is good for 700A per square inch of cross section. Copper is good for 1,000A per sq in. IIRC, mine are .25" x 1.5". So that's .375 sq in and ~ 260A. Which is essentially like 1/0awg jumpers. You can double that by doubling them up like Tommy did.

alec14
11-08-2012, 04:03 PM
$30 a bar for the 2lb 10" L ones (3)
$20 for the 1lb 8 3/4" L one (1)
$40 a bar for the 2lb 6oz 13 1/4"L ones (2)
$25 for the 1lb 14oz 10 1/4" one (1)

have any smaller, cheaper ones?

jockhater2
11-08-2012, 04:04 PM
have any smaller, cheaper ones?

Not at the moment. Those are cheap. Ask pro-rabbit ;
buy the 2 non matching pieces I have. I will sell you those for $45 shipped.

that is only a little more than aluminum for a metal that is 97% conductive while aluminum is 66%

alec14
11-08-2012, 04:08 PM
Not at the moment. Those are cheap. Ask pro-rabbit ;
buy the 2 non matching pieces I have. I will sell you those for $45 shipped.

that is only a little more than aluminum for a metal that is 97% conductive while aluminum is 66%

gettin a little bit more money right now, i'll get back to ya

jockhater2
11-08-2012, 04:10 PM
gettin a little bit more money right now, i'll get back to ya

:) sounds good. I found aluminum blocks on caco and the guy is asking a little less than what I am for these. And copper > aluminum.

alec14
11-08-2012, 08:23 PM
:) sounds good. I found aluminum blocks on caco and the guy is asking a little less than what I am for these. And copper > aluminum.

yeah, no doubt you have a good deal on these!

jockhater2
11-08-2012, 08:40 PM
I will take some trades. I am looking for an amp that does at least 750 watts @ 1 ohm
a really nice set of sub RCA's. Anything that is shielded. I am looking at getting the KNU konceptz for $80
a 50ft roll of 14 gauge speaker wire.

I would also trade for a ipod classic 80GBs-160GBs
Idk. throw some stuff out there

jockhater2
11-10-2012, 02:56 AM
bump bump bump it up

jockhater2
11-11-2012, 08:29 PM
bump

jockhater2
11-15-2012, 03:51 PM
wowzers

jockhater2
11-18-2012, 12:12 PM
bump

jockhater2
11-20-2012, 08:59 PM
copper > qu33r cheap azz aluminum

jockhater2
11-22-2012, 10:03 AM
aluminum svcks

Kingstroker
11-22-2012, 01:09 PM
thnx for the info, and im with ya, the american dolla is getting weaker every day it seems. atleast if i am forced to leave this place, gold silver ect will be worth just as much if not more elsewhere.. can we get back to trading animal furr too? lol

More than just fur, if the economy collapses precious metal won't be worth squat. We'll be trading ammo, food, fuel and fur(for clothing).

jockhater2
11-24-2012, 11:54 PM
trades?

jockhater2
11-28-2012, 04:01 PM
make offers

Julian
11-28-2012, 04:21 PM
can you get back with me about the long ones?

jockhater2
11-28-2012, 04:30 PM
can you get back with me about the long ones?

what do you mean "get back with me". I don't remember getting any messages from you.

text me
414 803 4813

Julian
11-28-2012, 04:42 PM
It was on the WTT thread

jockhater2
12-01-2012, 12:38 PM
Item(s) for Sale:

Number 1 copper bars. Pureness = 99.7% + usually there 99.9% (they are cut from cathode which is 99.9%)


Item(s) Description/Condition:

just random cut pieces


Price:

Depends on the size/weight of the bar

$30 a bar for the 2lb 10" L ones (3)
$20 for the 1lb 8 3/4" L one (1)
$40 a bar for the 2lb 6oz 13 1/4"L ones (2)
$25 for the 1lb 14oz 10 1/4" one (1)



a really nice set of sub RCA's. Anything that is shielded. I am looking at getting the KNU konceptz for $80

I would also trade for a ipod classic 80GBs-160GBs
Monster Beat Solos for my fiance
Idk. throw some stuff out there




Shipping and Miscellaneous Item Information:

small flat rate USPS box or whatever is cheapest
You pay shipping. In a flat rate it should never be more than $6 I think


Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).



**Note all copper bars will not be the same size. It is just random cut pieces.**

Here is what I got so far.


http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_112344.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_112319.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_112256.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133330.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133320.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133306.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133253.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121106_133236.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121108_111026.jpg

http://i1259.photobucket.com/albums/ii542/jockhater2/IMG_20121108_110952.jpg



Depends on the size/weight of the bar

$15 a bar for the 2lb 10" L ones (3)
$8 for the 1lb 8 3/4" L one (1)
$20 a bar for the 2lb 6oz 13 1/4"L ones (2) (SOLD!)
$10 for the 1lb 14oz 10 1/4" one (1) (sold!)


New prices.

jockhater2
12-01-2012, 01:45 PM
how much for like 2 pieces?

you still interested. I redid the prices

jockhater2
12-01-2012, 01:48 PM
the 2lb 6oz bars are sold
and the 1lb 14 oz

alec14
12-01-2012, 05:08 PM
you still interested. I redid the prices

how much now for the 2 you offered me before?

jockhater2
12-01-2012, 05:16 PM
how much now for the 2 you offered me before?

$35 shipped

alec14
12-01-2012, 05:22 PM
$35 shipped

No thanks, not really what I'm looking for at the moment

PapaGeno21
12-10-2012, 06:47 PM
Bump for a good guy!

Thanks for the deal man!

jockhater2
12-10-2012, 07:56 PM
2lb 1/4 oz bar sold!

04murdalanche
12-10-2012, 08:00 PM
May be needing some of these within the next few weeks.. Ill keep you posted

jockhater2
12-10-2012, 08:02 PM
May be needing some of these within the next few weeks.. Ill keep you posted

Yeah just let me know.
And if you need any different sizes. I'll see what I can do at work. I just can't get anymore bars right now. because at the end of the year. Work does a massive inventory. so I can't ask the VP for anymore until the inventory ends.

04murdalanche
12-10-2012, 08:07 PM
Yeah just let me know.
And if you need any different sizes. I'll see what I can do at work. I just can't get anymore bars right now. because at the end of the year. Work does a massive inventory. so I can't ask the VP for anymore until the inventory ends.

No prob, would probably be 2 longer pieces

jockhater2
12-10-2012, 08:08 PM
No prob, would probably be 2 longer pieces

Ok. This thread will be here. Just let me know.

jockhater2
12-10-2012, 08:10 PM
Bump for a good guy!

Thanks for the deal man!

http://i1259.photobucket.com/albums/ii542/jockhater2/Volkswagen%20MkII%20Build/IMG_0270.jpg


http://i1259.photobucket.com/albums/ii542/jockhater2/Volkswagen%20MkII%20Build/IMG_0269.jpg


http://i1259.photobucket.com/albums/ii542/jockhater2/Volkswagen%20MkII%20Build/IMG_0276.jpg


http://i1259.photobucket.com/albums/ii542/jockhater2/Volkswagen%20MkII%20Build/IMG_0277.jpg

jockhater2
12-11-2012, 08:53 PM
These are what I have left.

http://i50.tinypic.com/206kh2a.jpg

http://i50.tinypic.com/ekjfc4.jpg

jockhater2
12-14-2012, 03:10 PM
copper gets me hard

jockhater2
12-16-2012, 09:29 PM
****

jockhater2
12-19-2012, 08:55 PM
bump

jockhater2
12-24-2012, 01:36 PM
**** sandwhich

jockhater2
01-07-2013, 03:46 PM
bump

jockhater2
01-13-2013, 11:56 AM
dirty ****