PDA

View Full Version : RARE SQ HU Copper Chassis Rockford Fosgate RFX9220G



CerwinVega_Fan
11-05-2012, 12:08 PM
Item(s) for Sale:

RFX9220G



Item(s) Description/Condition:

Works 100%. Has a small chip on the vol. knob.
These are very rare and hard to come by. I believe these were made by Denon.
Really nice SQ unit here.
Rockford Fosgate RFX9220G (Discontinued 2005/2006 Model) - Abtec | Online Car Audio (http://www.onlinecaraudio.co.nz/Rockford_Fosgate_RFX9220G_Discontinued_2005_2006_M odel_)



Price:

$650 plus shipping
Will entertain trades for tc/la storm 3hp neo motors, 4hp subs, mmats 4000.1 or 3500.1.




Shipping and Miscellaneous Item Information:






Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

http://i70.photobucket.com/albums/i112/JAYMAN07/IMG_20121105_103525.jpg

http://i70.photobucket.com/albums/i112/JAYMAN07/IMG_20121105_103513.jpg

http://i70.photobucket.com/albums/i112/JAYMAN07/IMG_20121105_103713.jpg

BassAddictJ
11-05-2012, 02:13 PM
mmm copper chas


and yes these were made by denon

04murdalanche
11-05-2012, 03:13 PM
RAM_Designs didn't you say you wanted one of these? Or was it a eclipse?

garretttt4
11-05-2012, 03:56 PM
You always have such nice stuff, but I always have such little funds ..... :'( lol

RAM_Designs
11-05-2012, 04:40 PM
RAM_Designs didn't you say you wanted one of these? Or was it a eclipse?

I'm looking for an Eclipse. But if this were the cleaner looking Denon unit I'd be all over it.

CerwinVega_Fan
11-06-2012, 01:08 PM
mmm copper chas


and yes these were made by denon

Buy it man. You know you need this.


You always have such nice stuff, but I always have such little funds ..... :'( lol

Lol thanks man. You would believe how much I paid for it


I'm looking for an Eclipse. But if this were the cleaner looking Denon unit I'd be all over it.

Come on RAM... u know u want this. You're not gonna find that eclipse so you might as well by this one.

CerwinVega_Fan
11-07-2012, 02:26 PM
$500 shipped

Need to move this!

Fi-brations
11-08-2012, 08:59 AM
No eq or t/a?

CerwinVega_Fan
11-08-2012, 06:59 PM
No eq or t/a?

Will check the manual and get back to you. But i dont think it does.

CerwinVega_Fan
11-10-2012, 05:30 PM
Need this gone. Make offers

azngotskills
11-11-2012, 06:30 PM
mmm copper chas


and yes these were made by denon

This WAS NOT made by Denon, only the RFX-8240 and RFX-8250

got-one-eight
11-11-2012, 06:43 PM
Far as I knew only the 8240 and 8250 were made by denon.. like said above.

CerwinVega_Fan
11-17-2012, 07:58 PM
Bump

oddiofile
11-17-2012, 09:12 PM
I have a few copper chassis decks. Copper plated doesnt mean it sounds better, its more of a gimmick.

got-one-eight
11-18-2012, 11:45 AM
I have a few copper chassis decks. Copper plated doesnt mean it sounds better, its more of a gimmick.

I wouldn't say it's a gimmick... but not all copper decks are equal...

oddiofile
11-18-2012, 02:55 PM
I wouldn't say it's a gimmick... but not all copper decks are equal...

It does nothing to improve sound.

got-one-eight
11-19-2012, 09:14 AM
It does nothing to improve sound.

As a better conductor for noise rejection I would say it does...

Dirtrider4eva
11-19-2012, 09:35 AM
nice.

BoomBoxStereo
11-19-2012, 10:06 AM
i don't understand why someone would've paid 899 for this brand new...

CerwinVega_Fan
11-22-2012, 03:07 PM
Thanks for all the post dumping....

CerwinVega_Fan
01-04-2013, 03:47 PM
I guess no one wants this rare piece of car audio.

:(

West
01-04-2013, 03:50 PM
I have a mmats 3500.1...
Have you heard this deck, how does it sound?

CerwinVega_Fan
01-10-2013, 02:56 PM
Pm sent.

Bump

unrreal sounds
01-10-2013, 09:40 PM
i have the rockford 8140 from 1998 with remote box and disc changer and i wouldn't sell it even if it is a dead head the 8.5v pre outs is great to have
this looks nice and GLWS man if i had the funds you would have it sold

West
01-13-2013, 03:17 AM
Pm sent.

Bump

Pm me again with a lower price...
This deck intrigues me if it was made by Denon in 06...

West
01-13-2013, 03:20 AM
Is it active capable?

Sleeklsc
01-13-2013, 03:32 AM
Pm me again with a lower price...
This deck intrigues me if it was made by Denon in 06...

Post 11 and 12 say it wasn't made by Denon. Not that it means anything, just sayin'.

West
01-13-2013, 03:36 AM
Post 11 and 12 say it wasn't made by Denon. Not that it means anything, just sayin'.

Yeah... I can't find much info on this deck. MSRP was 900$
I just want to listen to it for a few days/a week. Any interest in renting it too me?

West
01-13-2013, 03:52 AM
Specs
General Model 9220
Operating Voltage +10.8V – +16.0V DC
Standby Current 5mA Max
Operating Temperature Receiver: -30˚C to +70˚C
CD Player: -10˚C to +65˚C
Dynamic Power Rating 40 watts x 4
per channel into a 4Ω load
RMS continuous power per channel, all 13 watts x 4 (4Ω load)
channels driven from 20-20,000Hz with less 17 watts x 4 (2Ω load)
than 0.5% Total Harmonic Distortion (THD)
Speaker Impedance 2Ω – 8Ω
Preamp Output Voltage 5V RMS @ 0.5% THD
Sum Preamp Output Voltage 5V RMS @ 0.5% THD
Preamp Output Impedance <50Ω
Equalization Bass: 10dB @ 60Hz
Treble: 8dB @ 15kHz
IR Receiver Eye Range 45˚ off axis
Overall Dimensions (with trim-ring) Height: 2-9/32" (58mm)
Width: 7-13/32" (188mm)
Depth: 7-1/4" (183.7mm)
Nosepiece Dimensions (without trim-ring) Height: 1-27/32" (46.5mm)
Width: 6-3/4" (171.5mm)
Depth: 13/16" (20.2mm)
Weight (Mass) 3.13lbs (1.42kg)
FM Tuner
Tuning Range
Americas 87.5 ~ 107.9MHz (200kHz spacing)
Eur/Aus 87.5 ~ 108MHz (50kHz spacing)
Frequency Response 30Hz – 12kHz
Usable Sensitivity 10dB (S/N 30dB)
IF Rejection 90dB
Image Rejection 50dB
Signal-to-Noise Ratio 60dB
Distortion < 0.5%
Channel Separation ≥ 25dB @ 1kHz
Suppression 35dB
AM Tuner
Tuning Range
Americas 530 ~ 1710kHz (10kHz spacing)
Eur/Aus 522 ~ 1620kHz (9kHz spacing)
Sensitivity 20dBf max @ 10dB sensitivity
-6dB Bandwidth 5kHz min – 12kHz max
CD Player
Compatible Discs 5" or 3"
Frequency Response 20Hz – 20kHz (3dB)
Signal-to-Noise Ratio >90dB (preamp output w/ 22kHz LP filter)
Distortion <0.5%
Channel Separation 86dB (preamp output w/ 22kHz LP filter)
Dynamic Range 100dB
IR Remote
Operation Voltage +3V DC
Transmitting Range 20 ft (variable in sunlight)
Battery Replacement (2) AAA +1.5 volts
Dimensions 4-1/8"(H) x 1-13/16"(W) x 1-1/8"(D)
(104.8mm x 46.0mm x 28.6mm)

CerwinVega_Fan
01-16-2013, 03:39 PM
Yeah... I can't find much info on this deck. MSRP was 900$
I just want to listen to it for a few days/a week. Any interest in renting it too me?

Are u being serious? If so we could possibly work something out.

CerwinVega_Fan
01-21-2013, 05:39 PM
Bump...

I'm sure there is someone out there that can appreciate this rare piece of car audio.

CerwinVega_Fan
02-01-2013, 11:27 PM
Bump

CerwinVega_Fan
02-10-2013, 08:59 PM
Someone make me an offer

CerwinVega_Fan
02-15-2013, 04:52 PM
$350 shipped

DoesDad
02-15-2013, 05:00 PM
Taxes are coming up... How about that K2 and this for a package deal? I'll send you a pm later when I get home from work. Mmmmm... That would be SQ ear ***!

CerwinVega_Fan
02-15-2013, 05:12 PM
Taxes are coming up... How about that K2 and this for a package deal? I'll send you a pm later when I get home from work. Mmmmm... That would be SQ ear ***!

Lol now that u say that I kinda wanna keep them both. But shoot me a PM of what u are thinking and we can work something out.

CerwinVega_Fan
02-25-2013, 05:01 AM
Yooo

CerwinVega_Fan
03-05-2013, 11:56 PM
350 shipped

EpicButthurt
03-05-2013, 11:56 PM
List it for 150 and get it out the door man...

EpicButthurt
03-05-2013, 11:57 PM
And please ffs change that sig man...

CerwinVega_Fan
03-06-2013, 12:46 AM
And please ffs change that sig man...
Ummmm no thanks

zinda
03-25-2013, 06:43 AM
i have the rockford 8140 from 1998 with remote box and disc changer and i wouldn't sell it even if it is a dead head the 8.5v pre outs is great to have
this looks nice and GLWS man if i had the funds you would have it sold

Had there flagship model with the 6 changer cost me $1200!! Can't remember what I did with it but I missed my Alpine that I had before that one. Also had a Denon back in 1985 with a matching 40wx5 amp, sweet system, put it in my ex-wifes Fiero, she ended up with it!

CerwinVega_Fan
04-04-2013, 06:40 PM
Bump

CerwinVega_Fan
04-23-2013, 03:39 AM
Bump

CerwinVega_Fan
05-14-2013, 05:36 PM
Bump

CerwinVega_Fan
05-25-2013, 08:27 PM
I have a rfx-8240 also if someone is interested. (made by denon)

CerwinVega_Fan
05-29-2013, 05:03 PM
$250 shipped

JL Audio
06-10-2013, 06:11 PM
$250 shipped

excellent price on this unit, pm your denon price... though I am still looking for the panny tube lol

CerwinVega_Fan
06-17-2013, 01:24 PM
Pm'd


bump

CerwinVega_Fan
07-12-2013, 01:20 PM
Bump

CerwinVega_Fan
08-16-2013, 10:09 PM
bump

CerwinVega_Fan
10-12-2013, 04:57 PM
Up top

NuckinFutz
10-17-2013, 08:53 PM
Up top

Not sure if you're into home audio but I have a harman kardon avr1700 I'd trade. Only a few months old. Used it maybe 3 times.

CerwinVega_Fan
10-17-2013, 08:57 PM
Not sure if you're into home audio but I have a harman kardon avr1700 I'd trade. Only a few months old. Used it maybe 3 times.

PM me some pics