PDA

View Full Version : 01 Silverado, 4 Sa-8s, AQ2200, DC POWER, & iPad 2



04murdalanche
11-04-2012, 02:31 PM
First off, as some of you know I had a build log on here previously but that was when I still had my blow through in my truck, ONLY reason I dont have it in any more is because I needed the bed for moving stuff back and forth to college so yeah, anyways, herrreee we go:)

anyways, heres how it looked when I got it

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo4.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/5N95K75H43I23Jd3N3c1v67ac40056d2818e5.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo2-3.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo5.jpg

ONTO TEH AUDIOZ

built this for some ICE:suave:

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo6.jpg

Kenwood x994 and EQ, love these two together, excellent SQ

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo18.jpg

Fuse Holders from SHOK industries

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo17.jpg

04murdalanche
11-04-2012, 02:31 PM
RCA cable for the HU to EQ and the Dock im using for the iPad dash

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo16.jpg

Old, "normal" AQ2200, sold it and got one with a PLEXI back, pics of that soon:)

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo19.jpg

Some AT deadening!
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo24.jpg

Still need to do more on the back wall now that the blowthrough has been removed and the panels have been rewelded in, kinda noisy. Currently theres two layers on the outer door skin, two on the inner panels, one-2 layers on the floor and some on the roof. I need to get some CCF and do a layer of that in the truck too to silence everything, anyone have any suggestions on what company to use or buy from?

tinted the tails, they came out good.

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo32.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo31.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo28.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo27.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo26.jpg

DC Level 4 15's that were in the blowthrough, these have been sold..
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo22.jpg

04murdalanche
11-04-2012, 02:35 PM
previous set up

http://i261.photobucket.com/albums/ii58/hhawksqb1/ac9accd0837311e1a9f71231382044a1_7.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/a681dd26829b11e1b9f1123138140926_7.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/9b941e2082ae11e1af7612313813f8e8_7.jpg

Heres the truck with the box in, and bedlinered

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo2-10.jpg

second iPad dash I built, sold it to a guy at a show who made me an offer I couldnt refuse.. I plan on building another soon tho

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo32-2.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo22-2.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo14-1.jpg

After getting cleared

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo12-2.jpg

My mids and highs amplifier, Its a JL Audio Jx 360.4, solid amp, but just sold this a few days ago so that I could pick up a Alpine PDX 4.150 at a crackhead price.
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo70-1.jpg

Heres my current doors, only could find this pic and boy were they shiiitty this was literally my FIRST time working with fiberglass, you can see the airbubbles, etc. etc.. turned out pretty bad. Im going to redo them soon for my 2 sets of crescendos. But one postive thing was that these doors taught me ALOT and will help me significantly with building iPad dashes and doing more doors, and fabrication in general.. I've gotten alot better as you can see with the dash pics i posted above lol..
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo5-4.jpg

Dtrom
11-04-2012, 02:38 PM
Tuned In. Love the iPad dash.

04murdalanche
11-04-2012, 02:39 PM
Sold all of that ish, and decided to change it up. From here on is now all my current equipment..
New AQ2200 with the plexi from BlactimusCrime, will definitely be lighting this up with some LED's to show it off

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo4-7.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo32-3.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo42-2.jpg

This should help with keeping the voltage up, DC XP 270 from dbeez, does 200 amps at idle, this one benches out at 280 amps max. , and about $1,500 worth of tools my dad gave me to help me work on my truck and audio stuff. I cant thank him enough, for how grateful I am for this.

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo-19.jpg

more pics of the DC alt

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo5-6.jpg

Picked up a DD1 to help me set my gains properly

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo3-6.jpg

oh look, its signed by Steve!

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo4-6.jpg

4 Sa-8 V1 D2s being built by woofercooker, if you want some cheap SA-8s hit him up, i got mine brand new CHEAP! excellent guy to do business with

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo5-5.jpg

they're in dallas waiting for me.. GF's dad sent me this pic the other day.. cant wait to get home for thanksgiving break to get them in.

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo4-5.jpg

04murdalanche
11-04-2012, 02:41 PM
Dropped a newer motor and trans with only 80k miles on it, my truck has, i think 145 on it.

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo43-2.jpg

More random pics of the truck

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo1-6.jpg

5k HID's installed

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo3-7.jpg

gotta support my school!
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo1-5.jpg

Pic i took today, yeah im low

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo2-9.jpg

MINT Alpine PDX 4.150, getting it for $150 on Craigslist in Minnesota thanks to BrownVanMan. these go for $300 used usually so it was a good pick up, its minty too!

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo3-5.jpg

04murdalanche
11-04-2012, 07:24 PM
No love?:(

mylows10
11-04-2012, 07:35 PM
looks good.i'm doing 4 8's under the rear seat in my z 71 on 2 ab vfl hybrid 4480 amps

04murdalanche
11-04-2012, 07:39 PM
looks good.i'm doing 4 8's under the rear seat in my z 71 on 2 ab vfl hybrid 4480 amps

What subs and what year z71?

mylows10
11-04-2012, 07:42 PM
97 extra cab. right now i have dd 1508 subs in the box i made,but changing to sa 8 v2 or b2 soon i hope

04murdalanche
11-04-2012, 07:43 PM
Tuned In. Love the iPad dash.

Thanks man, I can't wait to get the next one built, my dash is gonna be a nice command/driver info center to say the least.

Dtrom
11-04-2012, 09:04 PM
3g iPad?

gckless
11-04-2012, 09:06 PM
Nice so far. You planning on going all-out show truck, or going to keep it as a daily driver?

04murdalanche
11-04-2012, 09:16 PM
3g iPad?

iPad 2 with wifi+3g, im not using a data plan though, only reason I got the 3g option is because it has a GPS chip in it. wifi model does not, so when it is docked in my truck, once I jailbreak it and get the $150 tomtom app for free, I'll be able to tether the internet from my iPhone 5 to it, thus giving me turn by turn navigation..


Nice so far. You planning on going all-out show truck, or going to keep it as a daily driver?

mix of both, i really want to clean the truck up, and make it atleast somewhat show worthy, the interior is about to change durastically once I get back to Dallas for Thanksgiving and Christmas break (I'm in college in Oklahoma) I will be redoing the doors, along with doing the sub box, and making an armrest built into it, the box/center console will house the gain control for my sub amp, voltage meter, maybe a SMD meter or two, and this

EQ molded into my old center consoles cup holder
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo35.jpg

but at the end of the day, the truck will be my DD..

04murdalanche
11-04-2012, 09:55 PM
also picked this up to document the build, only DSLR that can record full 1080HD video, 36 frames p/s AND it records bass good:naughty:

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo1-7.jpg

09civic
11-04-2012, 09:57 PM
Everytime I see truck builds, it makes me get closer and closer to buying a truck...

04murdalanche
11-04-2012, 10:05 PM
Everytime I see truck builds, it makes me get closer and closer to buying a truck...

just dont be a ******* like I was a and get a single cab unless you wanna do a blowthrough, other than that they are fun:thumbsup:

09civic
11-04-2012, 10:07 PM
just dont be a ******* like I was a and get a single cab unless you wanna do a blowthrough, other than that they are fun:thumbsup:

I actually don't want one for a system. Just a truck for, well a truck. Haha.

04murdalanche
11-04-2012, 10:09 PM
I actually don't want one for a system. Just a truck for, well a truck. Haha.

well in that case i recommend a huge *** diesel lol

09civic
11-04-2012, 10:10 PM
well in that case i recommend a huge *** diesel lol

College + ***** on gas = NOPE.

chargdbassbuick
11-04-2012, 10:22 PM
nice truck, im tuned in

04murdalanche
11-04-2012, 10:23 PM
nice truck, im tuned in

thanks man, PM me.

04silverz
11-04-2012, 10:44 PM
Lots of good stuff. I really like the iPad dash. Ever since I first saw u post it on fsc a while ago I've been contemplating it. Once I get my new front stage setup perhaps ill look intoit again.

04murdalanche
11-04-2012, 11:15 PM
Lots of good stuff. I really like the iPad dash. Ever since I first saw u post it on fsc a while ago I've been contemplating it. Once I get my new front stage setup perhaps ill look intoit again.

ah yes, i need to go back and re-do my log on there, too.. if you have any questions or need any help with building it, PM me.. I can build you the slide in case for it all the way to doing a full dash. lmk

04silverz
11-04-2012, 11:22 PM
Cool. It would probably not be until after the start of next year as I just dumped money into my front stage and am 'this' close to having enough cash for my new lift.
Pm me info though on prices so I don't clutter your thread, on both insert and full dash. Also is full dash needed. If I decide to tackle on my own you can be sure ill have questions for u! Was thinking of using kindle fire also as its a tad smaller and tons cheaper

Keep up the good work though. Can't wait to see your truck finished

04silverz
11-04-2012, 11:25 PM
Also good call on not tinting your reverse light. When I did mine I decided to do the whole thing for uniformity and needless to say, backing up at night with tinted lights and 20% all around is interesting.

04murdalanche
11-04-2012, 11:26 PM
Cool. It would probably not be until after the start of next year as I just dumped money into my front stage and am 'this' close to having enough cash for my new lift.
Pm me info though on prices so I don't clutter your thread, on both insert and full dash. Also is full dash needed. If I decide to tackle on my own you can be sure ill have questions for u! Was thinking of using kindle fire also as its a tad smaller and tons cheaper

Keep up the good work though. Can't wait to see your truck finished

thanks man! and PM coming your way now

---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------


Also good call on not tinting your reverse light. When I did mine I decided to do the whole thing for uniformity and needless to say, backing up at night with tinted lights and 20% all around is interesting.

just drop some LED bulbs in there, will fix that right up

04silverz
11-04-2012, 11:27 PM
Oh yeah, that's with led bulbs! If I ever get around to it I may sand down and re do. But probably wont

DB-Audio
11-05-2012, 08:58 PM
truck looks clean man nice job

04murdalanche
11-05-2012, 08:59 PM
truck looks clean man nice job

Thanks man, I can't wait to get back to Dallas so I can start building this bish.

04murdalanche
11-06-2012, 12:56 AM
trading my iPad 2 for a iPad mini(: gonna do an install with the new mini instead.

Jayzbent
11-06-2012, 01:22 AM
Nice work man keep it up! I may get with you on that ipad dash been looking into doing this for a while.

04murdalanche
11-06-2012, 01:27 AM
Nice work man keep it up! I may get with you on that ipad dash been looking into doing this for a while.

thanks bro, just trying to get a Mini ATM.. wanna have the first one in the world with one in a silverado.

PM me for details.

Montana
11-06-2012, 04:48 AM
Clean clean clean!

Great custom work, lovely.

Tuned in!

travicles
11-08-2012, 01:29 AM
Nice truck! Where are you putting the SA-8's? I assume you're doing a box in the middle, because I don't see how you can fit them behind without losing a lot of foot room. If you are somehow fitting all of them behind the seats, I am quite interested.

04murdalanche
11-08-2012, 02:01 AM
Clean clean clean!

Great custom work, lovely.

Tuned in!

Thanks man, can't wait to get home to make money, go buy supplies and get to work.


Nice truck! Where are you putting the SA-8's? I assume you're doing a box in the middle, because I don't see how you can fit them behind without losing a lot of foot room. If you are somehow fitting all of them behind the seats, I am quite interested.

Center console, ported behind the passenger seat.

04murdalanche
11-12-2012, 05:04 AM
Update time!

Thanks to cthedinger ; I don't have to buy anymore deadener! Lol. I entered the contest on here to win some deadening and I won a 25 sq ft pack of 60 mil deadener I will be using it to do the back wall, and roof of the truck. Everywhere else has already been double layered in AT 60 mil.

Also, chick back in Dallas is going to buy my iPad 2 when I get back for $400.... LMFAO, it's a iPad 2 16gb wifi+3G. Ever since the new ones came out the prices have plummeted on Craigslist for them, but anyways.. Means ill only have to pay $60 to get the iPad Mini 16gb wifi+4g. I will be getting a black one, to match what will be my black dash.

Alpine PDX 4.150 is in Oklahoma City, bout an hour and a half from me.. Should be delivered Tuesday. I'm leaving to go home this Friday, will be home till the 25th.. I've got about $1000 worth of rims and tail lights, headlights, grills, etc etc to black out. This will give me my funding for the rest of the build and pay off some insurance I owe for the truck to my mom that's been helping me while I'm in college.

Gonna be ordering some Alphadamp CCF to silence my truck, and while I'm home I want to atleast build my amp rack. Ill try and do a design for what I'm thinking on the computer tomorrow and post it on here but basically I'm putting my extra 110AH battery, AQ2200, and PDX 4.150 behind the driver seat, gonna show off the AQ's guts as well.. With some LEDs!

More updates as I get the amp, iPad. Cash, etc! Stay tuned:popcorn:

Bettr n' Revrse
11-12-2012, 05:09 AM
I actually don't want one for a system. Just a truck for, well a truck. Haha.


well in that case i recommend a huge *** diesel lol

**** city kids

04murdalanche
11-12-2012, 06:58 AM
**** city kids

If I lived in Colorado, it'd be a whole other story man lol

Bettr n' Revrse
11-12-2012, 07:17 AM
I actually don't want one for a system. Just a truck for, well a truck. Haha.


If I lived in Colorado, it'd be a whole other story man lol

Biggest diesel states are right here in the 4 corners if you ask me...

redrider
11-12-2012, 10:14 AM
Pic i took today, yeah im low

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo2-9.jpg





not low enough lol well for me at least.....


cant wait to see more progress.

Serpent710
11-12-2012, 10:21 AM
Everytime I see truck builds, it makes me get closer and closer to buying a truck...

Help me do my truck build then you can buy one

04murdalanche
11-12-2012, 11:27 AM
Help me do my truck build then you can buy one

keep it to PM's fegs

---------- Post added at 09:27 AM ---------- Previous post was at 09:26 AM ----------


not low enough lol well for me at least.....


cant wait to see more progress.

lol thanks man, its getting there.

redrider
11-12-2012, 01:00 PM
no problem... always been a fan of the fullsize trucks. ive always wanted a 4 door chevy silvy. def would be an upgrade from my ext s10. my plans if they work out right come tax return time im going out to get a 4 dr titan(not a chevy i know but want different)..... go to shows(well at least here in florida) and its always chevy fullsizes or minis along with gmc's with the occasional taco, hardbody or suv..... rarely here besides one black titan do i see fullsize nissans done or even tundras done.


anyways keep up the progress.....

04murdalanche
11-12-2012, 01:17 PM
no problem... always been a fan of the fullsize trucks. ive always wanted a 4 door chevy silvy. def would be an upgrade from my ext s10. my plans if they work out right come tax return time im going out to get a 4 dr titan(not a chevy i know but want different)..... go to shows(well at least here in florida) and its always chevy fullsizes or minis along with gmc's with the occasional taco, hardbody or suv..... rarely here besides one black titan do i see fullsize nissans done or even tundras done.


anyways keep up the progress.....

I love Titans, just wish they were built as good as they look.. Keep in mind Nissan used the same brakes and suspension on the titan that they use(d) on the nissan frontier, its younger brother.

SourDeez
11-12-2012, 01:24 PM
Why isnt this an 04 avalanche?

knotdrummer88
11-12-2012, 01:38 PM
Why isnt this an 04 avalanche?

cause its an 01 silverado?:D

04murdalanche
11-12-2012, 02:06 PM
Why isnt this an 04 avalanche?

To make a very long story short, both my uncles have em. Always wanted one, bought one 100% by myself when I was 16, paid for the gas, insurance. Etc, mom made me sell it because she felt "I needed money to do other things" BS...

So I got a Acura TL, lady hit me, totaled it, same day my uncle won the lottery, told me he was gonna give me his avalanche since he was mad my mom made me sell mine. Didn't hear anything from him for two weeks, don't wanna bother him, figured he was busy so I don't say anything. I call him to see when he wants me to get it out of his way and he says his son just got outta jail and "he's in a worse situation then me" so he got the truck, and just like I predicted, almost to the day, 1 year later, a few weeks ago, the dumb **** crashed it. Should've been his third DUI so he could go away for a long time. Dumb fvck deserves it. But he got off cause of daddy. But I'm in the process of trying to get it now.

Should be interesting to say the least..

SourDeez
11-12-2012, 02:23 PM
To make a very long story short, both my uncles have em. Always wanted one, bought one 100% by myself when I was 16, paid for the gas, insurance. Etc, mom made me sell it because she felt "I needed money to do other things" BS...

So I got a Acura TL, lady hit me, totaled it, same day my uncle won the lottery, told me he was gonna give me his avalanche since he was mad my mom made me sell mine. Didn't hear anything from him for two weeks, don't wanna bother him, figured he was busy so I don't say anything. I call him to see when he wants me to get it out of his way and he says his son just got outta jail and "he's in a worse situation then me" so he got the truck, and just like I predicted, almost to the day, 1 year later, a few weeks ago, the dumb **** crashed it. Should've been his third DUI so he could go away for a long time. Dumb fvck deserves it. But he got off cause of daddy. But I'm in the process of trying to get it now.

Should be interesting to say the least..

****, that sounds ******.

Just curious, why did you have teh boner for avalanches? I would prefer a silverado or sierra myself.

And you wouldn't believe some of the kids I went to school with what their parents bought them.. $60,000 lexus's/trucks/sports cars when they were 15 or 16. I was always pretty jealous until I got out of school and now I am the one who pays my own rent, bills, car, etc. and my parents dont give me **** and those kids are all still living with their parents leeching like some leechs

04murdalanche
11-12-2012, 02:44 PM
****, that sounds ******.

Just curious, why did you have teh boner for avalanches? I would prefer a silverado or sierra myself.

And you wouldn't believe some of the kids I went to school with what their parents bought them.. $60,000 lexus's/trucks/sports cars when they were 15 or 16. I was always pretty jealous until I got out of school and now I am the one who pays my own rent, bills, car, etc. and my parents dont give me **** and those kids are all still living with their parents leeching like some leechs

Well you can take the midgets out easily, instant blow through, can easily be sealed off and taken out, lovely. Rear windows unclips from the tracks, comes with a bed cover, also sick. And I had a z71, so sunroof, leather, 8 way power seats, all dat good sheit, plus, It was sick as fvck to have the cleanest car at my school, knowing I was paying for it. All those kids won't amount to ***** in their lives. They don't know how to do ***** for themselves..

I grinded out all summer log 10 hours a day in a 100 warehouse with a 30 min lunch break so I could pay for my avalanche.. And that was on top of going to workouts for football, had to. So I could get a football scholly cause my parents straight up told me they weren't paying for college sooo yeah..


And I love my silverado, but if I could have an avalanche I'd take one alllll day long, it's just a perfect system vehicle IMO, and its bad ***. That's me tho:p

09civic
11-12-2012, 05:14 PM
Help me do my truck build then you can buy one

Haha then come back down to Mel you fvck.

redrider
11-12-2012, 05:30 PM
I love Titans, just wish they were built as good as they look.. Keep in mind Nissan used the same brakes and suspension on the titan that they use(d) on the nissan frontier, its younger brother.

oh my plans are to ride stock for very little time lol. the plan is to get the truck lay'd out on big wheels, and research I have done, peeps swap over gm parts to the front suspension, but either way i will be definitely upgrading the brakes and suspsension when it comes time. i just cant get away from the bagged scene.... my s10 has been bagged daily for 7+ years now so i know the day it goes that itch of not having switches etc will come back quick. just crossing my fingers plans work out, but you know life **** never works the way its planned lol


oh also congrats on the giveaway win I believe with AT.

04murdalanche
11-12-2012, 06:24 PM
oh my plans are to ride stock for very little time lol. the plan is to get the truck lay'd out on big wheels, and research I have done, peeps swap over gm parts to the front suspension, but either way i will be definitely upgrading the brakes and suspsension when it comes time. i just cant get away from the bagged scene.... my s10 has been bagged daily for 7+ years now so i know the day it goes that itch of not having switches etc will come back quick. just crossing my fingers plans work out, but you know life **** never works the way its planned lol


oh also congrats on the giveaway win I believe with AT.

yeah i hear ya, i dont think i could drive something stock. lol something has to be modded..

and thanks, i was really happy i won because Im in need of deadener for the back wall and roof, it was a nice surprise.

redrider
11-12-2012, 08:14 PM
yeah i tried for it since i will be in the need of some deadner for my wife's build she doesnt know about yet lol

04murdalanche
11-13-2012, 03:58 PM
Its here!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0082.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0078.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0079.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0081.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0080.jpg

Man I can't wait to get it installed later today! I love this camera, takes such clean pictures. so crystal clear

04murdalanche
11-15-2012, 05:14 AM
Just got done pickin up some install goodies for the truck.

First off here we have a dash kit for a '90 mustang, I found some **** bolts at home depot I will be securing this to the center console with, will make for a clean install of the x994 and EQ
http://i261.photobucket.com/albums/ii58/hhawksqb1/44_1.jpg

Case for the iPad mini i will be picking up either today or tomorrow
http://i261.photobucket.com/albums/ii58/hhawksqb1/T2eC16hHJHYE9nzpgIOoBQnLNyj2Nw60_3.jpg

Was lookin around and found this, 4 sq feet of Second Skin Overkill CCF, I wanna try and out and see if its really worth it. got it for $6 shipped to my door, you cant beat that!
http://i261.photobucket.com/albums/ii58/hhawksqb1/T2eC16dykE9s7tyVTBQlzNCEzk60_57.jpg

1/0 terminals for the Big 3!
http://i261.photobucket.com/albums/ii58/hhawksqb1/KGrHqJHJDIE7zCgpGJmBPF5Wm89ig60_57.jpg

B-day is on the 30th, moms said to expect an iPhone 5 in the mail so i went ahead and got a case for it! the iphone will be jailbroken and will provide a data connection for the ipad for GPS purposes
http://i261.photobucket.com/albums/ii58/hhawksqb1/KGrHqJHJC4FCFNEWMkWBQmry1-w60_3.jpg

and last but not least we have a fuse for the ladies install i will be doing over christmas break!
http://i261.photobucket.com/albums/ii58/hhawksqb1/KGrHqFHJE4EzoVUltKBQYMrI1u8g60_12.jpg

Hope you enjoy, more updates coming soon.

4bannger
11-15-2012, 10:23 AM
Nice build I don't care what people say trucks look sick slammed.

04murdalanche
11-16-2012, 08:39 PM
Nice build I don't care what people say trucks look sick slammed.

thanks man

---------- Post added at 06:39 PM ---------- Previous post was at 06:38 PM ----------

been super busy doing cars making money for the build since I got back, but i havent forgotten you guys!

Updates are a comin,

but my AT deadener got here from cthedinger ; he even threw in a free AT lanyard, COLEMAN IS THE FVCKIN BRO! a vid and install is coming within the next day or two,

also, Sold my iPad 2, iPad mini 4g is coming out in the morning. im ordering it tonight and going to pick it up in the morning, dash build will start tomorrow!

04murdalanche
11-18-2012, 04:17 AM
Ordered the only iPad mini 4g a the only available Apple retailer in all of dallas, will be picking it up tomorrow. and starting the dash as soon as I get home.


Dash kit got here today..

Heres some update pics:
welded in the back panel and caulked it, from the previous blowthrough set up
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0089.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0091.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/photo2-12.jpg

roof done with some AT 60 mil from my previous install
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo4-8.jpg

ready for expanding foam
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo5-7.jpg

heres a sneak peek:fro:
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo1-9.jpg

04murdalanche
11-18-2012, 01:05 PM
to the apple store i go!

http://i261.photobucket.com/albums/ii58/hhawksqb1/Capture-4.png

04murdalanche
11-19-2012, 02:50 AM
iPad mini WITH 4g. ladies and gents, been sanding the dash for an hour and a half tryna get it baby *** smooth, and i... ill just let the pictures do the talking(:
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0111.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0110.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0112.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0113.jpg

primered, mainly just a guide coat to see any other small places i need to sand
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0114.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0115.jpg

4bannger
11-19-2012, 10:28 AM
Digging the 4g! Ftw

04murdalanche
11-21-2012, 05:56 PM
Updates coming later tonight!! Making significant progress on the door panels, may finish them tonight

audiobaun
11-25-2012, 01:10 AM
Those door pods look BA!The truck build is Fantastic man,and that Ipad in the vehicle is like the way explained is gonna be awesome!!It was nice to have met you, and as stated, if you need any goodies,or if I can help you with anything,just ask,I may have it,and not far away,let me know.I thank you:santa:Hopefully Ill get my rearend fixed soon in the truck, and swing by some time for a demo,see what you think

04murdalanche
11-26-2012, 10:04 PM
Those door pods look BA!The truck build is Fantastic man,and that Ipad in the vehicle is like the way explained is gonna be awesome!!It was nice to have met you, and as stated, if you need any goodies,or if I can help you with anything,just ask,I may have it,and not far away,let me know.I thank you:santa:Hopefully Ill get my rearend fixed soon in the truck, and swing by some time for a demo,see what you think
hell yeaaaaaah!

and thanks for the offer man, if you need anything tools or install goodies wise i have some stuff too just let me know.


Pics are coming errrrbody!

04murdalanche
11-26-2012, 10:09 PM
first time using fiberglass..

LOL

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0135.jpg

plugged the holes left

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0136.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0137.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0138.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0159.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0160.jpg

went back and did a second layer around the perimeter to strengthen them

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0163.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0164.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0165.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0166.jpg

04murdalanche
11-26-2012, 10:11 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0167.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0169.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0170.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0171.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0172.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0173.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0175.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0176.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0177.jpg

04murdalanche
11-26-2012, 10:13 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0178.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0180.jpg

threw the amp in DD1'd it so i could hear these bishes!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0181.jpg

more pics coming in about a hour, waiting on my camera to charge so i can upload them lol

Superchevyman
11-26-2012, 10:23 PM
Pods looking good man cant wait to see them finished were you putting the tweets?

04silverz
11-26-2012, 10:33 PM
Nice pink phone! :fro:

JK, good work though. Lots better than my first, and only, pods I've built. Just took them out yesterday as I'm now back to single woofer setup

04murdalanche
11-27-2012, 12:40 AM
Pods looking good man cant wait to see them finished were you putting the tweets?

Thanks man, and you see those two ****** cut holes about 6 inches above the pods? I'm gonna put them there for now but they may get moved to the dash or pillars, not quite sure yet.


Nice pink phone! :fro:

JK, good work though. Lots better than my first, and only, pods I've built. Just took them out yesterday as I'm now back to single woofer setup

Thanks man, I just took my time, read alot about it and made sure everything was right,

And the phone, it's my girlfriends case, mine got messed up so I'm using this until I get my iPhone 5 here in a couple days for my birthday. Which is gonna be the source of Internet for my iPad, I can't wait! But yeah, I like my pink iPhone case(;

04murdalanche
11-27-2012, 01:59 AM
all done! as you can tell my wrapping skills need some work, but i think they came out pretty nice.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0183.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0184.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0185.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0186.jpg

who wants to see pics of them installed? perhaps a vid of them playing?:up2somet:

04silverz
11-28-2012, 07:24 PM
Pics and vids. Did the pods interfere with parking brake?

mklett33
11-29-2012, 02:23 PM
Great looking pods, def better the second time around! Would have loved to seen paint or vinyl though! Something you may want to try in the future that you may like is to cover your finished pods with painters tape, lay down some glass and make a "molded" shape insert. Paint that and then you can use it as an overlay on the pod to hide some of the seams of the carpet wrap. Kind of hard to explain, maybe you get the idea. Either way keep it up!

Dman3047
11-30-2012, 11:52 AM
Broooooooo, **** is looking nice.

pro-rabbit
11-30-2012, 11:55 AM
Broooooooo, **** is looking nice.

Oh, you are alive lol.

04murdalanche
11-30-2012, 12:04 PM
Pics and vids. Did the pods interfere with parking brake?
I just have to open the door to open the latch but other than that, not at all! had to have function with the design.


Great looking pods, def better the second time around! Would have loved to seen paint or vinyl though! Something you may want to try in the future that you may like is to cover your finished pods with painters tape, lay down some glass and make a "molded" shape insert. Paint that and then you can use it as an overlay on the pod to hide some of the seams of the carpet wrap. Kind of hard to explain, maybe you get the idea. Either way keep it up!

I wouldve loved to paint them too but with the truck being a daily its just not practical. I will be painting some pieces on the door though..

and I know what you mean with the "overlay" so to speak, ive seen it done multiple times and it looks pretty bad ***, if this were a show truck, I would've done just that.


Broooooooo, **** is looking nice.
thanks bro! alot more progress will be coming in two weeks, looking to have this build 100% done buy new years AT THE LATEST, probably sooner.

I gotta make a trip to OKC once its done so you and pro-rabbit can hear it. like i said I got boys that live in Yukon so its bound to happen lol


Oh, you are alive lol.
right? lol never thought we'd see him again!




as for the build, todays my birthday!:party:

so that means more $$ for the build! lol ordering some sheit today.


i may be getting a AQ3500 soon:eyebrow: video coming in a minute!

pro-rabbit
11-30-2012, 12:09 PM
We are in the same town and I still don't ever hear from him anymore lol.

If you make it up this way I will try and get a few people together if we can. Maybe get a few demos going and some metering if anyone wants to.

IonRL205
11-30-2012, 12:13 PM
We are in the same town and I still don't ever hear from him anymore lol.

If you make it up this way I will try and get a few people together if we can. Maybe get a few demos going and some metering if anyone wants to.

I'll have to come up there as well

04murdalanche
11-30-2012, 12:18 PM
We are in the same town and I still don't ever hear from him anymore lol.

If you make it up this way I will try and get a few people together if we can. Maybe get a few demos going and some metering if anyone wants to.


I'll have to come up there as well

im down for sure..


always down for meeting fellow bassheads, and I really wanna see what these 8's will meter, i mean i dont care about numbers really but ive always wondered. never really been in a LOUD car, nothing over 3kw..

04murdalanche
11-30-2012, 12:38 PM
raw uncut video but here you guys are!



http://www.youtube.com/watch?v=V0jj3loPSAI&feature=plcp

03F150MrSBF
11-30-2012, 11:52 PM
When you roll out to OKC Jeff let me know. Ill head out there with ya. I wouldnt mind checking out some LOUD setups.

04murdalanche
12-01-2012, 01:01 PM
When you roll out to OKC Jeff let me know. Ill head out there with ya. I wouldnt mind checking out some LOUD setups.

sounds good bro. itd be a lot of fun

04murdalanche
12-07-2012, 05:27 PM
just bought a second AQ2200!:santa:

04murdalanche
12-09-2012, 05:17 AM
Trading it and my current aq for a SAZ-3500, I don't have room for both AQs and would rather run 1 amp anyways, always wanted a sundown amp, will post pics once I acquire it. Trying to figure out where I'm gonna put my batts, thinking maybe under the hood just not sure where..

Gonna start and do a decent amount of the box monday.. Going back to Dallas on Wednesday. Finish the box, start the amp rack, etc.. Will post updates as they happen!


Thanks for tuning in everyone, pro-rabbit ; how can I change the title of this? I can't edit the original post.. I need to update it being that I'm not running an ipad 2 or an AQ2200 anymore, LOL

icpurplepplalot
12-09-2012, 12:06 PM
Would you be opposed to having a tool box in the bed? You could put the batteries there, as well as the amp.

04murdalanche
12-09-2012, 01:37 PM
Would you be opposed to having a tool box in the bed? You could put the batteries there, as well as the amp.

No point in doing that because ill end up doing another blow through within the next year so it's kinda pointless, I have thought about it.. Just too risky, I'd always be thinking about it unless I had a bed cover with locks out the *** on both. If I knew I was going to stay inside the cab I'd totally do it

04murdalanche
12-11-2012, 04:16 AM
The SAZ
http://i261.photobucket.com/albums/ii58/hhawksqb1/432359_4963748571477_1346675110_n.jpg

Dual Inputs
http://i261.photobucket.com/albums/ii58/hhawksqb1/IMG_20121127_142835.jpg

Big UPS to Kangaroux ; you're the man bro.. Thanks for hooking me up with this **** assdesign, **** tons of port!
http://i261.photobucket.com/albums/ii58/hhawksqb1/48330dd3a475ab429991c5210e6f1d55.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/8af32a7d9689ff23a2070addd4bb9f25.jpg

Got everything cut!!! I'm gonna start assembling some of it tomorrow, stay tuned!

http://i261.photobucket.com/albums/ii58/hhawksqb1/59e12f61db5033a0503f0f7af6c688b7.jpg

04murdalanche
12-12-2012, 01:00 AM
first thing with this update:

BIG shout out to 03F150MrSBF ; for all your vinyl/sticker needs hit him up, he can do just about ANYTHING you need..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0196.jpg

now what you see here is just pink sundown vinyl stickers right? well what im going to do is use them as stencils, first im going to build my box, and then I will stain the sides and top where i want the "sundown audio" to go, i will then lay the vinyl down over the stained wood, then Im going to roll on black paint over all of the box, remove the vinyl and I will have a black box with "sundown audio" written in stained wood, its gonna look super bad ***.. if you dont understand, dont worry you'll see what I mean in a few days.:emb:

heres a preview of how it will be laid out on the side pieces, the smaller sticker you see above will be on the top baffle

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0197.jpg


oh yeah, notice that SHOK 1/0, thats gonna be my negative run to the back batt.

anyways, IM GOING BACK TO DALLAS TOMORROW!!!

stay tuned bishes!

RangerDangerV2
12-12-2012, 01:04 AM
The SAZ
http://i261.photobucket.com/albums/ii58/hhawksqb1/432359_4963748571477_1346675110_n.jpg

Dual Inputs
http://i261.photobucket.com/albums/ii58/hhawksqb1/IMG_20121127_142835.jpg

Big UPS to Kangaroux ; you're the man bro.. Thanks for hooking me up with this **** assdesign, **** tons of port!
http://i261.photobucket.com/albums/ii58/hhawksqb1/48330dd3a475ab429991c5210e6f1d55.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/8af32a7d9689ff23a2070addd4bb9f25.jpg

Got everything cut!!! I'm gonna start assembling some of it tomorrow, stay tuned!

http://i261.photobucket.com/albums/ii58/hhawksqb1/59e12f61db5033a0503f0f7af6c688b7.jpg

not knocking jesse's work at all... but honestly the top baffle should be doubled up, and the port walls should also be doubled.

Kangaroux
12-12-2012, 01:11 AM
not knocking jesse's work at all... but honestly the top baffle should be doubled up, and the port walls should also be doubled.

There is bracing going in the port and the top is gonna be doubled up but I didn't put that in the design because it was discussed afterwards

ThatChevyGuy
12-12-2012, 01:11 AM
Love the truck love the build but why did you drop a new motor in it already did your other have problems? These trucks will run 350k if maintained. I had a work truck that was beat to **** and had 347000 and never touched a Thing not even a starter or coil pack

04murdalanche
12-12-2012, 01:30 AM
not knocking jesse's work at all... but honestly the top baffle should be doubled up, and the port walls should also be doubled.

LOL dont worry im not that much of a newb, it will be double baffled, i have a surprise for you guys, including Jesse, with it, itll be **** lets just say that. and as Jessie said, port will be braced, and the brace will be rounded over as well so that theres no noise.. there will also be a 1.75 inch dowel going from the baffle to the port wall where it is braced as well. and i will be fiberglassing the dowel, along with the 45s into the box.. so it'll be super solid.


There is bracing going in the port and the top is gonna be doubled up but I didn't put that in the design because it was discussed afterwards

^above, thank you again for taking care of me so suddenly..


Love the truck love the build but why did you drop a new motor in it already did your other have problems? These trucks will run 350k if maintained. I had a work truck that was beat to **** and had 347000 and never touched a Thing not even a starter or coil pack

I bought the truck with a blown motor, and it was a manual, it had 134k on it.. so i swapped in a new motor, along with a auto trans with 85 on them, so it should last me a while, i dont plan on selling this truck anytime soon. and 347,xxx? holy sheit thats impressive..

thanks for the comments everyone, some major updates are coming soon i can assure you of that,
audiobaun is coming over on friday night to help me do the "Big 6" with the two batts that i will have under the hood, box will be built, shits about to get real!

04silverz
12-12-2012, 08:39 PM
Wait, whatd i miss? Where is box going?
Man i kinda wish i hung on to my 2 sa8 and added two more. I still think about it at least once a week

03F150MrSBF
12-12-2012, 09:35 PM
The box is going in between the seats. Went over his plans and it's gonna be sick!! Now to wait until he returns back to Ada so I can have a listen.

knotdrummer88
12-12-2012, 09:37 PM
is that a combo is mdf and birch?

04murdalanche
12-13-2012, 02:56 AM
Wait, whatd i miss? Where is box going?
Man i kinda wish i hung on to my 2 sa8 and added two more. I still think about it at least once a week

MrSBF answered below but yeah man I heard this guy below me sa8s and they slammed, he had em on a hifonics bxi2601, so I'm interested to see what 3.5k will do to them:laugh:


The box is going in between the seats. Went over his plans and it's gonna be sick!! Now to wait until he returns back to Ada so I can have a listen.

Hellz yeah, even though there's nothing to do I kinda can't wait to get back. Cause that will mean my install is 100%done and yours will be getting improved.


is that a combo is mdf and birch?

Just birch on the box, amp rack will be in MDF just because I had it laying around..

03F150MrSBF
12-13-2012, 10:27 AM
Yup! Good deal.

I'm looking around for a Headunit now so ill try to do that and refinish my console and run wiring down to the opening where my knobs are. Little by little I suppose.

And hell yeah! That 3500 will make them move! Hopefully I go home this weekend and get those 2 M3b's here to check out.

Good luck bud.

04murdalanche
12-17-2012, 12:38 AM
welll, the guy with the SAZ backed out so Im on the hunt for another SAZ, a AQ3500, a DC 3.5 or a DD m3a. who knows, time will tell, we will see.. anyways, onto the pics

amps!

http://i261.photobucket.com/albums/ii58/hhawksqb1/a938da5b7535e0c6cfcd35db5d358997.jpg

started cutting and building the box, yes i overly build my boxes, do I care? no...

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0198.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0217.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0202.jpg

painting away

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0211.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0216.jpg

uhh hello port MR. PORT:fro:

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0218.jpg

Rain? idgaf

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0219.jpg

some 45s(: should help a lil with airflow

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0221.jpg

box was basically done but i was tired of working on it so I switched gears to the electrical portion of the build..

04murdalanche
12-17-2012, 12:39 AM
charging 1/0 from the alt to the main batt

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0223.jpg

That back corner is gonna house another batt

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0225.jpg

this little area in between the fuse box and radiator house will house another batt as well.. 3 total batts under teh hood

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0226.jpg

found this nice little spot to ground my batt to the frame, this goes straight down to the frame.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0227.jpg

all covered in loom and terminals sanded, ready for installation

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0228.jpg

The alternator is finally in!!!!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0230.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0229.jpg

still have to do the engine block to frame ground, will probably go knock that out shortly..

Next i decided to go ahead and sand my doors down, i used a wire brush attachment on my drill, it did the job well.. lol, got them all taped off and prepped. then bedlinered them.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0231.jpg

pods taped off

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0232.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0233.jpg

04murdalanche
12-17-2012, 12:39 AM
pods linered

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0234.jpg

doors

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0235.jpg

here you can really see the texture of the doors

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0236.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0237.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0238.jpg

threw my main batt on the charger to top it off..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0239.jpg

my messy work area! lol

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0240.jpg

my main runs to the back will be 1/0 Knu and 1/0 Shok, all the power wire that is visible inside the cab will either be blue or black, then for speaker wire to the mids it is blue, speaker wire to the subs is black and white, should be interesting to say the least,

Tonight Im going to sand down everything with the door inserts, etc and prep them for paint.. as well as finish my big 3 so my truck is driveable atleast lol. stay tuned!

ThatChevyGuy
12-17-2012, 01:23 AM
I need to paint match my grille now...

knotdrummer88
12-17-2012, 02:13 AM
nice man, looking good, and for that third under the hood are you making a custom bract/tray for it to sit on?

04murdalanche
12-17-2012, 02:38 AM
I need to paint match my grille now...

lol it looks sooo much better, i actually got that grille off a z71 tahoe because they came like that from the factory.


nice man, looking good, and for that third under the hood are you making a custom bract/tray for it to sit on?

yeah for both of the batts im adding under the hood, custom trays/boxes will be made. i was going to do metal, but i dont have a welder and dont know anyone who does so plywood+bedliner it is.. should look good though

knotdrummer88
12-17-2012, 02:40 AM
lol it looks sooo much better, i actually got that grille off a z71 tahoe because they came like that from the factory.



yeah for both of the batts im adding under the hood, custom trays/boxes will be made. i was going to do metal, but i dont have a welder and dont know anyone who does so plywood+bedliner it is.. should look good though

**** right, adapt and overcome man

04murdalanche
12-17-2012, 03:01 AM
**** right, adapt and overcome man

yessir! so I just ordered these

http://www.pjgloballlc.com/future_led/5050_cut/5050_18-1Ft_WP_white_pcb-black_02.jpg

http://www.pjgloballlc.com/future_led/5050_cut/SMD5050_60M_White_customer_01.jpg

these are gonna go on the bottom of the grille, on top of the lower light housings..

I also ordered some 5 k HID's, my bulbs are old and really need to be replaced, my head lights should be HELLA bright now, all for $65, not bad(:

knotdrummer88
12-17-2012, 03:11 AM
yessir! so I just ordered these

http://www.pjgloballlc.com/future_led/5050_cut/5050_18-1Ft_WP_white_pcb-black_02.jpg

http://www.pjgloballlc.com/future_led/5050_cut/SMD5050_60M_White_customer_01.jpg

these are gonna go on the bottom of the grille, on top of the lower light housings..

I also ordered some 5 k HID's, my bulbs are old and really need to be replaced, my head lights should be HELLA bright now, all for $65, not bad(:

how do you wire those in?

04murdalanche
12-17-2012, 04:05 AM
how do you wire those in?

I will just splice into the factory headlight harness so that they are on whenever my head lights are on.

04murdalanche
12-17-2012, 11:43 PM
So I got all the big 3 installed, alternator and wired up.. Started it up and it was squeaking:( stock pulley is a lil bigger than my DC Power alt so I went to autozone and fiddled around with a few smaller belts but none of them fit!:( they were all too small.. Turns out my belt was just worn out even though it was only 8 months old? So I got a new one, slapped it on there and viola! Back in business and my truck doesn't screech like yo momma.

Oh and BTW I'm charging at 15.3 bitchezzzzz((:

AND, I picked up this bit ch today, guy that backed out ended up getting his amp back so I'm set on a amp now!

http://i261.photobucket.com/albums/ii58/hhawksqb1/ee21a782ca6856b2f2762c4df205d90d.jpg

It's huge! And my dual inputs look RIGHT at home in this bish, cannnnt fuckinggg wait to install it I'm sooo hyped

04murdalanche
12-22-2012, 01:32 AM
I'm sanding all the pieces I'm painting on my doors down today, should have some updates soon.. I'm going to Louisiana with my fam in the a.m. and ill be gone till Tuesday but once I get back, fuuuuuullll fledged slaving on this bish till its done..

I ordered my ipad mini bezel from soundman so that should be here for sure by when I get back, and I got a XS D3400 for under the hood in that back corner, just gotta build a box/holder for it. plenty updates will be coming soon so stay tuned!:santa:

04murdalanche
12-25-2012, 04:10 AM
Leaving New Orleans in a few hours, gonna chill with the fam when I get back but starting tomorrow the 26th, I'm ham at it, doors will be getting re installed once everything is painted, gotta finish the box and get it in, and then it is onto the amp rack and other things, can't wait, stay tuned guyz(:

04murdalanche
12-30-2012, 02:12 AM
shhiittt ton of pics uploading!!

ibf150
12-30-2012, 02:41 AM
Killer build man, Let me know next time you come to New Orleans!

04murdalanche
12-30-2012, 03:30 AM
Evening *******... got some updates for yeahs..

lets start it off with a bang

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0249.jpg


Next two pics show why there hasnt been **** for progress the last week and a half, i was in New Orleans with my girlfriends fam!

this is her and I infront of the Superdome in downtown NO

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0261.jpg


bad *** pic I took while we were on the barge.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0270.jpg

Of course I went to Bourbon Street..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0279.jpg


Christmas day it snowed in Dallas, wtf! (Man I really need to get my valance back on...)

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0284.jpg

Started mocking up my little under dash housing that will hold my HU, test fitted in the truck and I still have room to move around even though Im 6'3.. it will be going above my left knee

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0291.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0293.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0294.jpg

iPad mini dash mock up. knob you see on the left flushed in is a Pac LC1 i took apart and mounted, it will serve as My bass knob, not sure if I will end up doing this dash white, or black, or a combo of both.. Im thinking a combo..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0296.jpg

04murdalanche
12-30-2012, 03:31 AM
Yeah its gonna be nice and flush

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0298.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0299.jpg

Looks like a good place for some LEDs...

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0303.jpg

Today I installed my LED's I ordered in my grille.

Heat shrinked and ready to go

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0306.jpg

Daytime pics do NO justice, you can only see the actual color of them at night, scroll down for night shots(;

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0309.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0310.jpg

Gettin ready to solder the passenger side

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0313.jpg

All taped up and done!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0316.jpg

Before...

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0300.jpg

04murdalanche
12-30-2012, 03:32 AM
After!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0323.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0324.jpg

They dont project much light out in front of the truck but from the LED's over to the side it lights up everything, they will compliment my HID's very well..

started painting some interior pieces I had sanded.. just wanted to see some progress really.. lol i still need to sand down some other panels.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0318.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0320.jpg

camera died after this pic but youre not missing much..

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0319.jpg

gonna take the lady shopping tomorrow so IDK what I will get done but stay tuned I may have some more small updates for you guyz.. sorry I havent been consistent with updates. thats about to change(:

also check out my build log for my girls car im doing, a VERY nice budget install im doing for her.

heres the link.

http://www.caraudio.com/forums/car-audio-build-logs-cars-trucks-suvs/562267-girlfriends-jeep-american-bass-alpine-mb-quart-audio-technix.html

jddmj
01-03-2013, 09:33 AM
Any updates? This is the whole reason I joined the site LOL! Nice build!

itsblown
01-05-2013, 03:19 PM
not a fan of the l.e.d strips, but **** I like that ipad mount man, hope those HID's are going into some kind of projector housing

04murdalanche
01-06-2013, 02:57 AM
Any updates? This is the whole reason I joined the site LOL! Nice build!

Thanks man it means a lot and yes I got quite a few pics to upload.


not a fan of the l.e.d strips, but **** I like that ipad mount man, hope those HID's are going into some kind of projector housing

Thanks bro! And the housings I have are technically for projectors, although they don't really look like it, I need to re aim the lights, I only bought HIDs to hold me over till I do a retrofit, I wanna do some TL projectors.. Paint the whole inside of the light to match the truck, etc. will be very *** when I'm done I promise.


Who wants some major audio updates!?

Joe562MMA
01-06-2013, 03:36 AM
all looks legit so far man nice:clap:

UnderFire
01-06-2013, 03:51 AM
The LED strips look a bit ricey to me, and I've seen plenty of Silverados with poorly done 6k retrofits, they throw light everywhere, definitely do the TL retrofit ASAP.

04murdalanche
01-06-2013, 11:47 AM
all looks legit so far man nice:clap:

Thank you!

I am painting some rims this morning but will have updates for you guys by tonight tons of progress has been made to say the least

jddmj
01-07-2013, 01:52 PM
Actually picked up my own iPad mini about 30 minutes ago to try this mod out myself. Should be a lot of fun.

Mommy Wagon
01-07-2013, 06:06 PM
I'm loving this build........

It's a great DD with good looks, a nice stance, and many perks put in for owner enjoyment.

Well done.

Mommy Wagon
01-07-2013, 06:10 PM
For future, or if you want to change the look, you can separate the lenses from the housings and lay the LEDs inside.

This will give it a true euro look similar to Audi.

They go back together super easy, I know you have skills, this is just a small detail that will take you to the next level over others

Great idea!



Yeah its gonna be nice and flush

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0298.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0299.jpg

Looks like a good place for some LEDs...

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0303.jpg

Today I installed my LED's I ordered in my grille.

Heat shrinked and ready to go

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0306.jpg

Daytime pics do NO justice, you can only see the actual color of them at night, scroll down for night shots(;

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0309.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0310.jpg

Gettin ready to solder the passenger side

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0313.jpg

All taped up and done!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0316.jpg

Before...

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0300.jpg

04murdalanche
01-07-2013, 10:14 PM
The LED strips look a bit ricey to me, and I've seen plenty of Silverados with poorly done 6k retrofits, they throw light everywhere, definitely do the TL retrofit ASAP.

I will probably do it in the summer. I really wanna do it. I think it'll look nasty as hell


Actually picked up my own iPad mini about 30 minutes ago to try this mod out myself. Should be a lot of fun.

Hell yeah man I'm gonna start on it tomorrow or Wednesday.


I'm loving this build........

It's a great DD with good looks, a nice stance, and many perks put in for owner enjoyment.

Well done.


For future, or if you want to change the look, you can separate the lenses from the housings and lay the LEDs inside.

This will give it a true euro look similar to Audi.

They go back together super easy, I know you have skills, this is just a small detail that will take you to the next level over others

Great idea!

Thank you for the compliments I really appreciate it

When I do the retrofit and open the housings is when I plan on putting the LEDs inside of the lenses. It should come out really nice I want to color match or do black, not quite for sure on my decision.

04murdalanche
01-08-2013, 05:14 PM
Oh how I've been lacking on updates, been building the amp rack today, need to go buy some L brackets, it's coming together though! The way I mounted the SAZ looks pretty cool, subs are in the box and in the truck as well. Picking up batts tomorrow, were almost done guys:)


I'm leaving for school Sunday, I think Friday is e warmest day and best chance to fiberglass so I'm gonna do it all then as far as the ipad dash. Should be painting it and finishing this bish just in time before I leave!

OH and I almost forgot, I'm picking up a NS v1 motor and 15" basket:) for $50!!!!! not sure what all I'm gonna build them (once I pick up another) with but uhh.. They'll be nasty. Carbon fiber dust caps, custom this and that, I may paint the baskets as well.. Not sure yet. But it will be sick as hell I promise.


I know I'm wearing out my welcome with no pics but rest assured I have been taking plenty, just too lazy to upload.

Dtrom
01-08-2013, 05:17 PM
Can't wait til end result should be nasty. Thinkin bout running a multiple SA8 setup in the future.

keep_hope_alive
01-09-2013, 01:51 AM
looks like fun!

04murdalanche
01-09-2013, 04:27 AM
Can't wait til end result should be nasty. Thinkin bout running a multiple SA8 setup in the future.

buy mine when i sell them this summer lol


looks like fun!

oh it has been so far. cant wait to hear it. Obviously this isnt a SQ build but please feel free to critique away my friend.im all ears, no pun intended..


UPDATE TIIIIIIIIME

---------- Post added at 02:27 AM ---------- Previous post was at 02:26 AM ----------

Continuing on with the HID install, I added a relay harness as well so that both HID's ALWAYS turn on when I start the truck, was having some problems with them not both turning on sometimes, onto the pics,


one installed, looking good

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0325.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0330.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0331.jpg

still need to be aimed but im very happy with the form and function of the install.. gonna do a HID retro this summer but for now this will do.

got the door pockets back in and the arm rests installed.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0346.jpg

LOL very ghetto and obviously a temporary place for it but i needed somewhere to put it! lol will put it somewhere else when I find the space,may just put it in the center console for when I redo the blowthrough..
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0347.jpg

Did one last coat on these

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0348.jpg

blacked out these little lights on the bottom of the door so they didnt stick out like a sore thumb

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0344.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0349.jpg

Installed

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0351.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0352.jpg

still need to sand and paint the sail panel that goes on the top right by the window but this is what they are going to look like, simple and clean, just like i wanted.

04murdalanche
01-09-2013, 04:31 AM
Got the second baffle on and started cutting the holes

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0340.jpg

finished cutting, and painted the box black

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0342.jpg

decided to add a little twist

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0343.jpg

came up with this!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0355.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0356.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0345.jpg

Installing!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0358.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0359.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0367.jpg

cleaned up some wires as well

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0353.jpg

04murdalanche
01-09-2013, 04:37 AM
ready for the amp rack!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0354.jpg

Started cutting some panels

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0363.jpg

Carpeted

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0365.jpg

then my camera died:( mounted the amp behind my seat against the wall at a 45 degree angle. stil trying to find room for the PDX 4.150... mmm we will see.. pics of the 15" Sundown NSv1 motor and basket coming in a few.

keep_hope_alive
01-10-2013, 03:03 AM
i recommend more airspace for the door woofers.

03F150MrSBF
01-10-2013, 07:01 AM
Nice progress man. Looking good.

Can't wait to hear them when you get back!

04murdalanche
01-10-2013, 03:52 PM
i recommend more airspace for the door woofers.

Why do you say that?


Nice progress man. Looking good.

Can't wait to hear them when you get back!

Should have it playing this afternoon. Worked on it all night. Got loooots done, gonna finish it today

keep_hope_alive
01-11-2013, 06:55 PM
Why do you say that?

airspace looks too small, causing pesky response and poor low frequency response.
Always determine the Q of a sealed airspace.

04murdalanche
01-12-2013, 03:57 PM
airspace looks too small, causing pesky response and poor low frequency response.
Always determine the Q of a sealed airspace.

I see.. Hmm, would drilling holes in the back of the "enclosure" and the door panel help with better low end response? Of should I rebuild and do bigger pods? Or just mount rings on the doors so the kids are IB? What do you think would sounds best? I mean I love bass and all but I want these mids to sound as good as I can make them sound.

keep_hope_alive
01-12-2013, 04:57 PM
you could drill some 4" holes then sandwich fiberglass insulation between to small speaker grills to create an aperiodic membrane.

or just make 5" holes and let them play into the door.

04murdalanche
01-16-2013, 04:17 AM
you could drill some 4" holes then sandwich fiberglass insulation between to small speaker grills to create an aperiodic membrane.

or just make 5" holes and let them play into the door.

i may do the latter, that sounds the most reasonable for me.. mm, thanks for your response. i appreciate and value your opinion

---------- Post added at 02:17 AM ---------- Previous post was at 02:16 AM ----------

lets start with electrical updates.

so Im only running 2 106 ah Dekas, one is also running duties as the front batt.. lowest ive dropped too AT IDLE was 12.7, when im driving its bullet proof im dropping to maybe 14.5 at full tilt and it charges right back to 15.3 within a few moments.

threw some wood in there so the batt would sit level and not move around.

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0368.jpg

Installed,

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0370.jpg

Figured out i needed bussbars real quick so i went to home depot and found this ish

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0376.jpg

metal blades for the jig saw

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0378.jpg

got it all in and situated

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0371.jpg

rear batt behind the passenger seat

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0369.jpg

dropped the amps and crossovers in

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0372.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0381.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0387.jpg

04murdalanche
01-16-2013, 04:18 AM
Dual Inputs!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0388.jpg

wired up the subs, with the clear and black 8 gauge

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0383.jpg

started the ipad dash

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0389.jpg

fiberglassed the pan

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0391.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0395.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0396.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0397.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0398.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0399.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0400.jpg

gonna bedliner it but inside all the lines where the AC controls and iPad goes, will be painted white.. it should tie everything together

btw, this ***** SLAMS! ill get vids soon(:

Dtrom
01-16-2013, 04:31 AM
:yumyum: looks awesome!

04murdalanche
01-16-2013, 05:14 AM
:yumyum: looks awesome!
thanks bro

Oh, also picked this up. NS V1 basket and motor from TheycallmeJT ;

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0393.jpg

By this summer I want to have the blowthrough in, I want to do a "4th order" itll basically be a ported box with a loading wall, not quite a full 4th order, @Ram_Designs will be doing the design.

Im in the process of selling my mids, i wanna get the newer crescendos..

http://store.crescen...-6-5-mid-range/

also, Im no longer going to be running a head unit when i do the blow through my old center console from the previous blowthorugh is going back in, its gonna get cut up and made the way i like it(:

I will be running a Audison Bit Ten D as my head unit and processor. will be flush mounting the controller in the center console

not sure on subs right now..

I may be working out a deal for some B2 woofers so i might get them if he lets me do a payment plan over the next month because I really want them lol

garretttt4
01-16-2013, 05:46 AM
iPad 2 with wifi+3g, im not using a data plan though, only reason I got the 3g option is because it has a GPS chip in it. wifi model does not, so when it is docked in my truck, once I jailbreak it and get the $150 tomtom app for free, I'll be able to tether the internet from my iPhone 5 to it, thus giving me turn by turn navigation..



mix of both, i really want to clean the truck up, and make it atleast somewhat show worthy, the interior is about to change durastically once I get back to Dallas for Thanksgiving and Christmas break (I'm in college in Oklahoma) I will be redoing the doors, along with doing the sub box, and making an armrest built into it, the box/center console will house the gain control for my sub amp, voltage meter, maybe a SMD meter or two, and this

EQ molded into my old center consoles cup holder
http://i261.photobucket.com/albums/ii58/hhawksqb1/photo35.jpg

but at the end of the day, the truck will be my DD..

You better not put any open cans in those cup holders. Lol **** be crey crey.

keep_hope_alive
01-16-2013, 10:20 AM
nice updates. lots of gear in that ride.

ThatChevyGuy
01-16-2013, 01:35 PM
vids!

04murdalanche
01-16-2013, 07:23 PM
You better not put any open cans in those cup holders. Lol **** be crey crey.
LOL you ain't lyin.. But I'm gonna run a Audison Bit ten when I redo the blow through so I don't need that EQ I'm gonna take it outta there and sell it.

nice updates. lots of gear in that ride.
Thanks man, it was a tight squeeze for sure.. When I redo the blow through there will be ALOT more room.. Thinking of getting a tool chest for the bed to store some stuff back there..


vids!
Ask and you shall receive sir. Give me a little while I just took one..

garretttt4
01-16-2013, 07:39 PM
LOL you ain't lyin.. But I'm gonna run a Audison Bit ten when I redo the blow through so I don't need that EQ I'm gonna take it outta there and sell it

Ask and you shall receive sir. Give me a little while I just took one..

Vids vids VIDS!!! Ondalay! Can't wait to see this ****!

04murdalanche
01-16-2013, 08:25 PM
Vids vids VIDS!!! Ondalay! Can't wait to see this ****!

Uploading now, puta.

garretttt4
01-16-2013, 08:26 PM
Uploading now, puta.

Done yet!? Lol!

04murdalanche
01-16-2013, 08:37 PM
Done yet!? Lol!

iPhones taking forever. 60%

garretttt4
01-16-2013, 08:42 PM
iPhones taking forever. 60%

Damnit I phone!

04murdalanche
01-16-2013, 08:59 PM
Damnit I phone!


http://www.youtube.com/watch?v=sNw1NlhAzCI

showin some air movement, if you dont wanna listen to me talk and go straight to the bass just skip to 2:30 lol
ThatChevyGuy ;

garretttt4
01-16-2013, 09:15 PM
http://www.youtube.com/watch?v=sNw1NlhAzCI

showin some air movement, if you dont wanna listen to me talk and go straight to the bass just skip to 2:30 lol
ThatChevyGuy ;

Shits crazy even listened to you talk the whole 2:30. I subscribed and liked it. Haha :)

audiobaun
01-16-2013, 09:20 PM
Looking Good man, since I last saw you:santa:Alot of work goes into a nice build..Very nice!!

04murdalanche
01-16-2013, 09:42 PM
Looking Good man, since I last saw you:santa:Alot of work goes into a nice build..Very nice!!

thanks WM! you gotta hear it when I come back in the beginning of Feb


Shits crazy even listened to you talk the whole 2:30. I subscribed and liked it. Haha :)

thanks bro i appreciate it!

ThatChevyGuy
01-16-2013, 09:43 PM
awesome thanks

04murdalanche
01-16-2013, 09:44 PM
awesome thanks

no problem I hope you enjoy the vid

audiobaun
01-16-2013, 09:51 PM
Man, Id love to check your setup out..I should have my truck back on the road by then,hopefully, so you can check out my new American Bass amps,in action..the 2,Mini Hybrids 4480.1D @1ohm ea of 2250 rms, and the American bass Mini Hybrid 150.4,125 rms x4 on the mids and highs..Should be done mid Feb I believe..Still saving up for 4-new subs,prob 12s instead of 10s.. 1k ea rms:),,just spent $640 bucks on new rearend gears, and thats not it..Its the Bearings,,will run me another $500 to get replaced..oh well,at least it will all last for another 200,000 miles,hopefully,,,lol

04murdalanche
01-17-2013, 08:18 PM
Man, Id love to check your setup out..I should have my truck back on the road by then,hopefully, so you can check out my new American Bass amps,in action..the 2,Mini Hybrids 4480.1D @1ohm ea of 2250 rms, and the American bass Mini Hybrid 150.4,125 rms x4 on the mids and highs..Should be done mid Feb I believe..Still saving up for 4-new subs,prob 12s instead of 10s.. 1k ea rms:),,just spent $640 bucks on new rearend gears, and thats not it..Its the Bearings,,will run me another $500 to get replaced..oh well,at least it will all last for another 200,000 miles,hopefully,,,lol

Daaamn that's some serious cash, it should treat you well though.. I'm coming back on the 1st, we should definitely meet up

03F150MrSBF
01-18-2013, 02:19 PM
Yeah. His truck slams. Sounds real good. Now on to the dash!

Lets go get that stuff today if I get off at a decent hour.

04murdalanche
01-18-2013, 02:21 PM
Yeah. His truck slams. Sounds real good. Now on to the dash!

Lets go get that stuff today if I get off at a decent hour.

I'm actually going to Dallas I've got 4 cars to do.

Ill just finish it there with my stuff.. Thank you though, and I won't forget to bring it back lol

04murdalanche
01-19-2013, 01:37 PM
look what i bought guise:graduate:
B2 Audio HS 15"s D1
http://i261.photobucket.com/albums/ii58/hhawksqb1/6DCBE44A-FD0C-4996-A363-C25FEF73CD63-16101-00001DD0F979A9F5.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/1358399794226.jpg

Dtrom
01-19-2013, 01:44 PM
Nice man! I'm diggin that b2 gear.

sacsking916
01-19-2013, 01:55 PM
b2 is da seqs

04murdalanche
01-19-2013, 02:17 PM
Nice man! I'm diggin that b2 gear.

sheeit, me too bro.cant wait to get these woofers in, i wanna have them in my truck by summmer at the latest.. going to school will hold me back but im thinking i may be able to get them in on spring break if i can knock this box out between now and then.


b2 is da seqs

id have to agree with you there sir. a 3" coil that can handle 3k daily? uhhh did i misread that? lmao. pretty impressive subs.

TheycallmeJT
01-22-2013, 08:51 AM
Pretty nice gear man. Few guys in the area running b2 and it is impressive

04murdalanche
01-22-2013, 02:55 PM
Pretty nice gear man. Few guys in the area running b2 and it is impressive

thanks man, I really cant wait to get mine in..

updates, went back to Dallas for the weekend and made some dough, basically got the B2s paid off, just need to sell my Pioneer AVH-3300BT and I should be able to get them down to the crib.

Took a nice flex vid yesterday, it wasnt even turned up for most of the vid but still got some flex, then i turned it up and well, you know:up2somet: door skin doesnt flex much at all cause theres 180 mil worth of AT deadening on it lol.. but the windows and surrounding area flex pretty good. should have the video uploaded by tomorrow.

04murdalanche
01-24-2013, 12:38 PM
sold the double din, should be able to pay off the woofers, in another week or two ill have the money to get them shipped down here. cant wait!

04murdalanche
02-11-2013, 09:25 PM
Soooo i got updates, no pictorals.. nothing in yet but i think it got EVERYTHING planned out for the blowthrough, amp layout, what equipment ill be running, etc..

whos interested in knowing?:naughty:

audiobaun
02-11-2013, 10:35 PM
Soooo i got updates, no pictorals.. nothing in yet but i think it got EVERYTHING planned out for the blowthrough, amp layout, what equipment ill be running, etc..

whos interested in knowing?:naughty:

Im all for it my man..:santa:

04murdalanche
02-12-2013, 03:53 AM
Im all for it my man..:santa:

Glad to know not everyone is a picture *****! Aahaha

So I'm gonna switch from the x994 to a Pioneer DEH80PRS
Change from the crescendo 6.5s to Sundown Neo Pros
Switch from the Alpine PDX 4.150 to 2 SAX 125.2s
Obviously switch to the B2 Audio 15's

04murdalanche
02-18-2013, 01:01 PM
pics coming today stay tuned

Jerhemy
02-18-2013, 02:29 PM
That B2 gear looks smexy as hell man! I would love to run some B2 woofers and amps one day :greedy:

Great job so far on the build! can't wait to see what you do next!

04murdalanche
02-18-2013, 09:55 PM
That B2 gear looks smexy as hell man! I would love to run some B2 woofers and amps one day :greedy:

Great job so far on the build! can't wait to see what you do next!

Thanks bro! I don't think I'll ever run their amps but I sure do love the subs even though I have yet to hear them lol

It's gonna get wild pretty soon, I've got some bad *** ideas for my amp rack and whatnot., stay tuned.. Pics coming shortly

Jerhemy
02-18-2013, 11:08 PM
Thanks bro! I don't think I'll ever run their amps but I sure do love the subs even though I have yet to hear them lol

It's gonna get wild pretty soon, I've got some bad *** ideas for my amp rack and whatnot., stay tuned.. Pics coming shortly

ahh my bad, just assumed that pic of the B2 stuff, including the amps, was a pic you took. Hell yea man some day I will run their subs for sure.

Can't wait to see what you've got planned next! Great work, keep it goin

04murdalanche
02-23-2013, 12:24 AM
Got my sundown Neo pro 6.5s in today from Jayzbent, who wants pictures!?

Jayzbent
02-23-2013, 01:48 AM
Got my sundown Neo pro 6.5s in today from Jayzbent, who wants pictures!?
Heck ya! Post them up broski.

TheycallmeJT
02-25-2013, 12:01 PM
I want updates!!

04murdalanche
03-01-2013, 09:50 PM
Heck ya! Post them up broski.


I want updates!!

been super busy with school buuuut. ask and ye shall recieve:)

pics uploading nao

04murdalanche
03-01-2013, 09:54 PM
BNIB Sundown SAX 125.2 i picked up for $100 on CL
http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0434_zps2e5f3e30.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0433_zpsc46b8f1d.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0432_zpsdafd9581.jpg

Sundown Neo Pros from Jayzbent ;

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0438_zps88140cfb.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0439_zps9d830a0a.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0440_zps9f110711.jpg

yeaah buddy!

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0442_zps59bf5333.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0444_zpsb785114e.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/DSC_0446_zps5b2e1e43.jpg

04murdalanche
03-03-2013, 03:10 PM
No love for sundown goodness?:(

03F150MrSBF
03-04-2013, 11:42 PM
No love till I hear them :p:
Ill take the meter too. Let er rip!

04murdalanche
03-05-2013, 12:17 AM
No love till I hear them :p:
Ill take the meter too. Let er rip!

Sheit(:

04murdalanche
03-13-2013, 10:48 AM
Well to make a long story short, the deal with the B2s fell through. Once i am Refunded my money, I'm on the hunt for a pair of nasty 15"s or 18s.

TheycallmeJT
03-13-2013, 10:58 AM
Well to make a long story short, the deal with the B2s fell through. Once i am Refunded my money, I'm on the hunt for a pair of nasty 15"s or 18s.
**** no bueno on the bad deal with b2 homie

04murdalanche
03-13-2013, 11:00 AM
**** no bueno on the bad deal with b2 homie

I know:/ I was extremely disappointed. But I'm glad to be getting my funds returned. I may have Zeuslicious build me some low end monsters

04murdalanche
03-14-2013, 12:32 PM
Been looking around, in no huge rush but the Tantric subs are catching my eye Jayzbent

04murdalanche
03-25-2013, 01:25 PM
Bought some goodies...


Pics, anyone interested in them?:naughty:

TheycallmeJT
03-25-2013, 01:46 PM
Show me them goodies!

SUNDOWNBITCH
03-25-2013, 01:51 PM
Bought some goodies...


Pics, anyone interested in them?:naughty:

Im not at all

04murdalanche
03-25-2013, 04:34 PM
Show me them goodies!


Im not at all

got these *******, 18" Nightshade v1s from teen.. cant say what i plan on doing with them yet though........;) only 03F150MrSBF knows
http://i261.photobucket.com/albums/ii58/hhawksqb1/sundown18s_zps79e4719d.jpg

pics of the new HU coming shortly

04murdalanche
03-25-2013, 05:20 PM
http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps3a37622d.jpg

SUNDOWNBITCH
03-25-2013, 08:43 PM
got these *******, 18" Nightshade v1s from teen.. cant say what i plan on doing with them yet though........;) only 03F150MrSBF knows
http://i261.photobucket.com/albums/ii58/hhawksqb1/sundown18s_zps79e4719d.jpg

pics of the new HU coming shortly

Not cool

redrider
03-25-2013, 09:18 PM
**** man i went through all 13 pages looking for final install pics of one system but you change setups just like a normal person changes their underwear....daily lol

04murdalanche
03-26-2013, 01:14 AM
Not cool

K.(;


**** man i went through all 13 pages looking for final install pics of one system but you change setups just like a normal person changes their underwear....daily lol

Lmao pretty much.. But all the gear I'm obtaining now, it's gonna be it for me, the "finale" I've tried everything I wanted to try. I'm gonna do one more build and ill be done for a while, and I mean atleast a few years. I'm gonna be building the truck as well do money will be going to that and not audioz, so I'm making sure ill be fully satisfied with this install

It's gonna be all finished off and look **** too

redrider
03-26-2013, 09:04 AM
well subscribed to see what the finale is lol

03F150MrSBF
03-26-2013, 10:56 AM
It's gonna be a good one!
No leaks from me...

04murdalanche
03-26-2013, 11:55 PM
well subscribed to see what the finale is lol


It's gonna be a good one!
No leaks from me...

:naughty:

picking up another SAX 125.2 on thursday for $80!!! cant believe my luck, i got a BNIB one for $100 and now a mint one for 80.. helllz yeah.


and just now i placed a order with Knu Konceptz for 2 more sets of the Knu Krystal locking RCAs and 28 ft of black 0 gauge for more ground runs, etc.. shits getting real:up2somet:

04murdalanche
03-30-2013, 03:19 PM
Pics coming shortly:)

Popwarhomie
03-30-2013, 03:59 PM
:naughty:

picking up another SAX 125.2 on thursday for $80!!! cant believe my luck, i got a BNIB one for $100 and now a mint one for 80.. helllz yeah.


**** you......

04murdalanche
03-31-2013, 05:53 PM
**** you......

Lol take it back or no pics for you guys:up2somet:

04murdalanche
04-02-2013, 12:52 PM
Sundown 125.2s, yum:yumyum:

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps193c2dd4.jpg

28 ft of Knu CCA

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zpsbc076277.jpg

3 sets of 6m 2 channel Knu Krystal locking RCA's for the 3500 and both 125.2s

http://i261.photobucket.com/albums/ii58/hhawksqb1/null_zps9e6c15e2.jpg

04murdalanche
04-21-2013, 09:11 PM
Yo

Alright soooo.... this will be the last audio update in this build log. in 3 weeks when i get home from school i will be stripping all my audio out, cleaning up the truck, and listing it up for sale.. been through alot and learned alot with this truck but there just not enough room for me.. I have to move stuff alot being that I go to college so I will be buying a 1997-2001 Jeep Cherokee.. Don't worry I'm not getting outta teh audio. Still gonna use all the **** I got now. But the Alpine PDX, sundown Neo pros, and 2 of the SA-8s are for sale if anyone's interested.

New system will consist of the following:

Ipad mini, ran to a Rf 360.3
2 sets of Tantric Hd 6.5 Components
2 Sundown Nightshade 18" subs
Power will come from a Sundown SAZ 3500 along with a pair of SAX 125.2s
Mechman 270 amp alternator
All Knu wiring and RCAs
Same Deka 106ah batts, have 2 currently, will be adding another.. Voltage will be rock solid

It's gonna be a clean, clean, clean... Anyways..

So I rdered my first piece of non-recycled equipment for the Jeep.. I will be doing two sets but for right now I'm ordering one, second set will be ordered after I buy the car/truck.

As we all know. Tantrics subs are teh ***, well so are their mids that they have coming out here soon.. Here are some pics

Specs
http://i261.photobucket.com/albums/ii58/hhawksqb1/89c1b6b5623ae7266bb54cbfb1cea65d_zps77eeb8b2.jpg

This is what really opened my eyes on these.. TaylorFade ;s testing in these, comparing them to a $1200 comp set just blew my mind, they lack very little compared to the Dynaudios.:suave:
http://i261.photobucket.com/albums/ii58/hhawksqb1/51e00e43ef5cac68cd02563a018d8ab8_zps7c3b8cd8.jpg

Woofers

http://i261.photobucket.com/albums/ii58/hhawksqb1/c9306ce310514be76af411f9ea58b725_zpsff8139a6.jpg

Dat ***:santa:
http://i261.photobucket.com/albums/ii58/hhawksqb1/605af6e15f6ace2f956b3f75f44d0220_zps46956215.jpg

Cross overs, (will be black, this is just a proto)
http://i261.photobucket.com/albums/ii58/hhawksqb1/aab068664208dbfdd99383e5aa2150a9_zps5e691ecc.jpg

Tweets
http://i261.photobucket.com/albums/ii58/hhawksqb1/8d673a408bb89dce2cf74010c21465ee_zpseeb1cfa8.jpg

http://i261.photobucket.com/albums/ii58/hhawksqb1/c922389d79c420d1df6faedbf43a8977_zps36e87b55.jpg

Ill keep you guys posted with the tear down as well as gathering equipment, all I need is one more set of comps and the RF 360.3...

Anyways, figured I'd leave you guys with some vids.. Dash is flexing pretty good. Shiitty part is I filmed these with my iPhone which doesn't pick up bass or flex for **** so that's really saying something when you see the dash move like it does.


Enjoy. And thank you for watching

04murdalanche
04-21-2013, 09:13 PM
http://m.youtube.com/#/watch?v=f96HTc-PCyA

http://m.youtube.com/watch?feature=plcp&v=GjEJTuxEAbc