PDA

View Full Version : CDT Audio HD-690CF 6x9 mids/subs



btolenti
10-21-2012, 01:18 PM
Item(s) for Sale:
CDT Audio HD-690CF 6x9 mids/subs

Item(s) Description/Condition:
In great condition. Were mounted in the rear deck of my wife's car, and run for about 15 minutes total - never finished installing a system in that car. The mounting flange has some leftover deadener on it, but other than that they're in good condition. These run about $200 through CDT directly now.

CDT Audio HD-690 CF (http://www.cdtaudio.com/sep_components/subwoofers/hd690cf.htm)

SPECS
1 pr 6X9" carbon fiber subwoofer
Frequency response 30Hz-4000Hz
Power handling: 200WRMS
Impedance 4 Ohm
Sensitivity: 90.1dB
Dimensions: 6.625"X 9.25"
Ellipse (168.3mm X 235mm)
Ellipse (Exclusive of mounting tabs) 6" X 8.625"
Ellipse (152.4mm X 219mm)
Ellipse Free Air use mount in rear deck, large door or panel
Mounting depth: 3.5"
Cone: carbon fiber cone
Magnet weight 30 Oz
Cone surround Buytal rubber
Voice coil: 2.0"

Price:
Asking $100 shipped/insured OBO.

Shipping and Miscellaneous Item Information:
See above.

Item Pictures:
http://i347.photobucket.com/albums/p480/brandontolentino/IMG_2029.jpg
http://i347.photobucket.com/albums/p480/brandontolentino/IMG_2030.jpg
http://i347.photobucket.com/albums/p480/brandontolentino/IMG_2031.jpg

btolenti
10-28-2012, 03:20 AM
Bump for offers.

rebelfromva
10-28-2012, 04:14 AM
These my old mids?

btolenti
10-28-2012, 12:59 PM
Nope. Bought these straight from CDT.....

marleyskater420
10-28-2012, 02:18 PM
Got your PM. Lemme know what you decide.

btolenti
10-31-2012, 10:03 PM
Sales fell through! Bump for reasonable offers!!!

cal
11-01-2012, 06:18 AM
any trades?

btolenti
11-01-2012, 10:42 AM
Trades (partial or full) I would consider for any of the amps are: nice pair of mids (need to replace the 6x8 in my front doors - 5.25 and smaller diameter 6.5s work) or a 10/12" SQ subwoofer (Boston G5, JL W6, etc.)

cal
11-01-2012, 10:48 AM
can u add cash?
http://www.caraudio.com/forums/speaker-classifieds/559125-zapco-refrence-sq-components-built-esb.html

btolenti
11-01-2012, 10:55 AM
I've been eyeing those since you posted them. Concerned they may not fit my application though. Can you give me some dimensions? Particularly, the mounting depth on the mids and the diameter of the raw tweeter?

cal
11-01-2012, 11:02 AM
I've been eyeing those since you posted them. Concerned they may not fit my application though. Can you give me some dimensions? Particularly, the mounting depth on the mids and the diameter of the raw tweeter?

the depth on the mid is 2.56 "
the tweeter is wide 2.26"
depth .472

btolenti
11-02-2012, 04:19 PM
Bump for the weekend. (Cal, still debating on what we discussed)

btolenti
11-04-2012, 01:38 AM
Bump for offers still!

btolenti
11-08-2012, 01:08 AM
Bump for offers!

KINGDELL91
11-08-2012, 10:46 AM
Pm sent.

cal
11-09-2012, 11:23 PM
Bump for offers!

my offer still stands