View Full Version : Aq 1200
10-12-2012, 06:01 PM
Item(s) for Sale:
AQ 1200D amp (no bass remote/wire)
Original owner of amp, and have had it about three years. Never had to be serviced, no fuses blown, not abused. 9.9/10 cosmetically, there are some very small scratches around screw holes and on one very small portion of a corner. 10/10 mechanically. The only reason I'm selling is because I'm getting rid of the car that it was in, along with everything else I had in it. I'm hoping to save this money and put it towards another amp in the future when I get a different car and setup.
I'm open to local pickups as well. I'm in the south suburbs of Chicago for those in the area interested.
10-12-2012, 06:07 PM
you gotta post pics with username and date or the mods will delete the thread
10-12-2012, 06:09 PM
Yes, I know. I'm having trouble getting pictures to show.
10-12-2012, 06:10 PM
ya sometimes it acts up for me too
10-12-2012, 06:12 PM
I used the insert picture feature first, but nothing appeared other than the code. Is this the way you use as well?
*Edit* Got it.
10-12-2012, 06:26 PM
Trade for an AQ2200 + cash on your end?
10-12-2012, 06:52 PM
10-16-2012, 02:56 PM
Bump, sale fell through.
10-16-2012, 03:07 PM
Do you have the bass knob?
10-16-2012, 03:12 PM
No, states no bass remote/knob or wire. Also, I'm open to trades for a good quality AQ2200 with $100 added on my end.
10-16-2012, 11:58 PM
10-18-2012, 05:11 PM
Bump, still available.
10-19-2012, 10:48 PM
10-19-2012, 10:52 PM
Are you only looking for a AQ2200?
10-19-2012, 11:04 PM
Yeah, that would be the only trade I'd be interested in.
---------- Post added at 10:04 PM ---------- Previous post was at 10:03 PM ----------
Yeah, that would be the only amp I would be interested in. *Sorry for the double post*
10-19-2012, 11:04 PM
10-19-2012, 11:19 PM
10-19-2012, 11:23 PM
Yup! Free bump for ya.
10-24-2012, 02:10 AM
I'll trade you an AQ 750.
10-25-2012, 06:11 AM
Sorry, no thank you.
10-27-2012, 04:49 AM
10-27-2012, 06:02 PM
what're the specs on it?
10-27-2012, 09:56 PM
SQ series amplifiers are fully stable down to one ohm.
Daisy Chain connection of two amplifiers stable down to 2 ohms
Four way protection circuits: Speaker shorts, DC offset, High/Low voltage, Thermal protection
Double sided boards with high current MOSFET switching devices
24db/oct slope crossovers, Fully adjustable Low Pass Filter and Subsonic Filter
Remote Gain Knob Included
Frequency Response 20Hz—250Hz
Signal to Noise Ratio 100db
Low Pass Crossover 24db / Oct
Low Pass Crossover Range 20Hz—200Hz
Subsonic Crossover Range 10Hz—50Hz
Input Sensitivity 0.2V—8V
Output Master / Input Slave Connection Yes
Working Voltage 8V---16V
Efficiency @ 4 ohm 84%
Damping Factor Less than 150
Fuse Rating 40Amp X 3 (Linked 240 Amp)
Output Power 14.4V @ 1% THD 510X1 @ 4 ohm,870X1 @ 2 ohm,1200X1 @1 ohm
Output Power 14.4V @ 5% THD 1470X1 @ 1 ohm
11-27-2012, 05:23 PM
Is this amp still available?
11-27-2012, 05:25 PM
what was it powering?