PDA

View Full Version : Group Buy SPL-Lab Meters + SMART Monitor



shizzzon
10-08-2012, 07:13 PM
Group buy has started. It will end Nov. 2nd at 11:59pm EST.

To be a part of the group buy, please PM me your email address and we will send you an invoice to be paid for $165 via Paypal or using Paypal processing.

You can either pay that amount or pay in full by letting us know to invoice for full amount.
Remainder amount needs to be paid within 60 days from now.

All Group buy orders are expected to ship by the middle to end of November.

Below is all pricing for what we have to offer.
We also offer custom calibrations listed below. If you do not need anything changed, you will receive a normal built meter.

NOTE- when paying, please let us know what you are purchasing.

Below is what we offer-

For information on our meters, please visit our website at- SPL LAB USA (http://www.spllabusa.com)

USB Meter-
Stock specs - 120-179dB 10hz-120hz
Price - $339 Group buy

Options-
110-169dB, 115-174dB

LCD Meter-
Stock specs - 120-180dB 20hz-120hz
Price - $399 Group Buy

Options-
10-120hz
115-175dB, 125-185dB, 130-190dB, 135-195dB

USB Pro Meter-
Stock specs - 120-179dB 10hz-120hz
Price - $509 Group Buy

Options-
110-169dB, 115-174dB

Wireless Bluetooth Meter-
Stock specs - 130-180dB 20hz-120hz
Price - $409 Group Buy

Options-
10-120hz
125-175dB, 135-185dB, 140-190dB, 145-195dB

USB Noise Meter-(RTA)
Stock specs - 80-140dB 20hz-20000hz
Price - $259 Group Buy

RTA Pro Meter-(RTA)
Stock specs - 90-130dB 20hz-20000hz
Price - $359 Group Buy

Both above RTAs can be adjusted to 10-20000hz for free or up to 22000hz for a $15 fee.

SMART Monitor

http://www.spl-lab.ru/assets/images/Products/smart-monitor-scheem.png

(We are using 200A sensors instead of 100A as shown above).

http://www.spl-lab.ru/img/smart%20monitor/1.jpg
http://www.spl-lab.ru/img/smart%20monitor/2.jpg
http://www.spl-lab.ru/img/smart%20monitor/4.jpg

This is the device we have been working on for quite sometime.
This is NOT just a monitor like many other products out there but will take ACTION when a fault is found and shutdown your car audio equipment completely preventing damage and will show the user exactly what tripped and it's value when tripped.

This device allows many adjustable sensor settings to compensate for how much power you are running, etc...

Equipped with onboard ROM, we can write additional firmware instructions allowing this device to do even more things in the future.

NORMAL RETAIL Pricing sold directly through SPL-Lab USA - $392 shipped.
Group Buy pricing for this device - $329 shipped.

Group Buy pricing for this device for only 1 of 2 sensors - $284 shipped.

If you only want the AC or the DC side sensor, you can save some money that way. To purchase the other sensor in the future, pricing will be $60 shipped and we do stock sensors for both AC and DC.

The Manual for the SMART Monitor will be available soon along with more updated pictures.

(We still do not have any cases in stock. We will be getting PLENTY of them at the beginning of the year)
Any questions or anything, please ask.

hispls
10-09-2012, 02:22 AM
Please explain the difference between the two types of RTA meters. I think I need one.


To everyone else, wireless SPL meter is the best 450$ you'll spend this year on audio.

Dtrom
10-09-2012, 02:27 AM
How does the wireless meter work?

rebelfromva
10-09-2012, 02:29 AM
Op I think I've asked you before but how close do these compare to the tl

slim2fattycake
10-09-2012, 03:03 AM
How does the wireless meter work?

You can use it through bluetooth technology on an android system or PC.


Op I think I've asked you before but how close do these compare to the tl

Depending on the termlab, dead on.

Dtrom
10-09-2012, 03:05 AM
You can use it through bluetooth technology on an android system or PC.



Depending on the termlab, dead on.

Helz yeah! Anything that works with iphone/iPad?

gckless
10-09-2012, 03:10 AM
Ohhhh man, I'm trying not to spend money! But, I WANT :D

slim2fattycake
10-09-2012, 03:13 AM
Helz yeah! Anything that works with iphone/iPad?

only android right now. hell, you can get a samsung galaxy s1 for about 100 bucks right now and run the meter on that. ;p

Phoenix Risen
10-09-2012, 03:16 AM
that smart board is pretty slick, would be cool to get a watts and ohm load read out instead of the volts and amps.

Dtrom
10-09-2012, 03:16 AM
The numbers show up on the phone?

Phoenix Risen
10-09-2012, 03:17 AM
yep, its actually a pretty cool system.

Dtrom
10-09-2012, 03:47 AM
Is it up to par with term lab, as far as accuracy goes?

Chriszle
10-09-2012, 05:30 AM
I'm leaning toward picking up the lcd meter. Always wanted one.

shizzzon
10-09-2012, 07:00 AM
Yes, that is why we exist. We are their direct competition and unlike the TL, we have been bringing new tech to the car audio scene for years and still growing.

We have leagues that use SPL-Lab as the official meter all over the world and we continue to manufacture new products year after year.

We have more than double the measuring products TL has for less, free software and new electronic devices that just do not exist in the car audio market the way that ours is designed.

If we were not close to what current organizations use, then we wouldnt stay in business..

shizzzon
10-11-2012, 10:42 PM
Pics of the SMART Monitor have now been released!

http://www.spl-lab.ru/img/smart%20monitor/1.jpg
http://www.spl-lab.ru/img/smart%20monitor/2.jpg
http://www.spl-lab.ru/img/smart%20monitor/4.jpg

The Protection Device for 2012.

Protecting both AC and DC Voltage and Current.

Group Buy pricing- $329 shipped for the whole kit.

Do not wait to get your hands on the first device built to take action against possible harm before failure happens!

shizzzon
10-21-2012, 09:47 AM
We now have detailed information about the SMART Monitor(Protection Device).

Only 2 weeks left before SMART Monitor Group Buy is over.

New product from Spl-Lab, the Smart Monitor, will protect your car audio devices from damage; will help with tuning sound in the car, as well as measure power and acoustics characteristics of your sound system. Actually, the Smart Monitor replaces an ammeter(clamp meter), True RMS digital voltmeter and Oscilloscope and in addition to this, provides protecting functions.

Application:
Smart monitor takes measurements of DC voltage and amperage used by car amplifiers, as well as AC voltage and amperage delivered by the amplifiers to a subwoofer or other acoustic components. If the current, voltage or power consumption exceeds the set values, Smart Monitor breaks the controlling circuit of Remote amplifiers, thereby switching them off and protecting the acoustic system before user's interference.

IE- With the device, it is possible to define the lower limit of voltage, feeding an amplifier, to 10 volt, which will protect it from slump and set the upper limit to 15 volt. Then if voltage will be within the limit of 10-15 volt, Smart Monitor will work as a digital voltmeter, displaying current values, but if the voltage exceeds these limits, the device will detect it and cut off the Remote circuit. The same way it works with exceeding the set limits of AC or current. As another example we can give is setting a power-handling capacity for a subwoofer at 4000 watt, then in case of exceeding the power delivered by the amplifier to subwoofer, the Remote circuit will be also cut off protecting the speaker.

Usage for protection:
1. Protection of car amplifiers caused by under voltage or excess input voltage.
2. Protection of car subwoofers and acoustics from overheating and damage caused by uprating the allowed current and voltage (power) of input signal.
3. Protection of the acoustic systems from overheating and damage caused by playing back the corrupt (cut, clipped) input signal.
4. Protecting the electrical wiring of a car and other components from a burn-out at rapid increase of current and voltage (power) consumption by the car audio system.
(This does not mean to stop using fuses. Basic protection is still mandatory when using ANY aftermarket protection device. This is an advanced protection device that fusing alone does not suffice in full protection.)

Usage for measurements:
1. Monitoring in real time mode of direct voltage and current (power) consumed by your amplifiers and, thereafter, delivered by your alternator and battery. This is an ammeter and digital voltmeter at the dashboard of your car.
2. Displaying voltage and current (power), delivered by the amplifier to the subwoofer or other acoustics according to TRUE RMS algorithm. Devices that measure using this algorithm are rare and not all that cheap, but if you have the Smart Monitor you won't need them. You will be able to compare manufacturer specified amplifier characteristics with actual ones easily.
3. Monitoring readings from two sensors simultaneously (AC and DC, voltage or power).
4. Matching levels (Gain) of different channels of your amplifiers by measuring the amplitude of variable signal, delivered by the amplifier using specialized set-up CD, which is included with every order. Tuning of your car amplifier will become easier and more demonstrable for you.
5. Monitoring the coefficient of harmonic distortion of signal, played back for tuning your car audio equipment with the aid of distortion (“clip”) detection using fast Fourier transformation method.
Your components will be protected from overheating and sound will be clear. This feature is available as separate “firmware” with limited functionality.
6. Monitoring current impedance of your acoustics. The device automatically displays impedance along with the signal power delivered by the amplifier.

Ergonomics:
Smart Monitor consists of the main unit with an aid of which controls major features of the device and displaying data about the state of the system.

The unit can be provided in plastic case or without it for hidden installation (for example into the dashboard).

Apart from the main unit, there are two detachable sensors of AC and DC, and voltage, which are seated directly into the measured circuits of the car audio system. If the limiting value of measured current of 200 ampere is lower than permitted, there is an option of protection only by voltage.

Sensors are connected to the main unit using specialized wires that are up to 5 meters long. The DC and voltage sensor usually should be seated under the hood of the car next to the fuse, and the AC and voltage sensor should be seated in the boot, where amplifiers and subwoofers are usually placed.

The power for the device is supplied from car network, 12 volt through the cigarette lighter adapter.

Simultaneous connection of one DC and voltage sensor and one AC and voltage sensor is possible.

Specifications-

Measured value of DC - from 0 to 200 ampere.
Measured value of DC voltage - from 0 to 30 volt.
Measured value of AC- from 0 to 100 ampere.
Measured value of AC voltage - from 10 to 300 volt.
Maximum diameter of electric conductor for measuring a current - Standard 1/0 AWG.****
Maximum Remote circuit current - 1 ampere.
AC and voltage measuring algorithm – True RMS.
Measured values: voltage, current, power, impedance.
The algorithm of the system distortion defining - the fast Fourier transformation method.
Display - two-line LCD with backlight
Sockets/connectors: Power, USB, sockets for two sensors, Remote circuit.
Firmware upgrade - Possible through USB and PC.
Dimensions: (W*H*D) 2.56" x 4.92" x 1.57" (main unit), 2.09" x 3.23" x 1.18" (sensors)

****- If you have an application where the wire being used exceeds 1/0 standard size, you can use the DC sensor on a smaller amp such as a front stage amp. Measuring voltage drop on this amp is still effective to measure voltage drop across entire vehicle as the source of the voltage drop effects the entire vehicle.

You can also put this in line with a cable that is connecting front battery or alternator to rear but only if the values of the alternator do not exceed 200A.

Remember, 200A rating is an RMS rating, not peak rating.
Example- Crescendo BC5500D requires ~500A of fusing total, 250A per power run.

It is completely safe to put this DC sensor on one of the 2 power lines without worrying about the current being too much for the sensor.

shizzzon
11-20-2012, 10:03 PM
All Group Buy Orders are being shipped out tomorrow!