PDA

View Full Version : Proto 8"s



funky waves
10-03-2012, 02:28 PM
Item(s) for Sale:

Two prototype 8" subwoofers, both with 2" underhung coils, 18mm Xmax(36mmp-p) Good for 500~800watts. Paper cone, CF dustcap. Single 4ohm. The ceramic one has a taller profile surround for more mechanical travel, and an aluminum sleeved pole. The Neo one, has of course a neo motor, and a slightly larger spider, the basket was modified to allow for it.


Item(s) Description/Condition:

Used for testing only. Motors are raw steel so have a little surface rust.


Price:


$275ea OBO, +actual shipping.

Shipping and Miscellaneous Item Information:




Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

matt_bennett05
10-03-2012, 02:37 PM
Well those sure are pretty. You'll have better luck if you post up your T/S sir.

funky waves
10-03-2012, 02:41 PM
Sorry forgot to;

Neo motor;

Fs 37.70 Hz
Re 3.48 Ohm
Qms 6.30
Qes 0.57
Sd 182.0 cm2
Vas 10.9 l
Xmax peak 18.00 mm

Ceramic motor;

Fs 44.41 Hz
Re 3.52 Ohm
Qms 7.80
Qes 0.97
Sd 182.0 cm2
Vas 6.6 l
Xmax peak 18.00 mm

bergend2
10-03-2012, 03:03 PM
That Neo is tempting...

CerwinVega_Fan
10-03-2012, 04:11 PM
Aww man those are nice!

CHEMMINS
10-03-2012, 06:45 PM
Looks like an LA Storm neo motor.

And shipping moofers to the US bites donkey balls. Should keep em up here in the frozen.

JL Audio
10-03-2012, 06:51 PM
Funky pm me on the neo, i'll take it via your pm.

I used to own your old neo proto 8 with the 3" coil and custom basket. I think you know the one i'm talking about.
This one:
http://i106.photobucket.com/albums/m247/Epyonic1543/900x900px-LL-1581b5d5_IMG_3454small.jpg

CerwinVega_Fan
10-03-2012, 08:00 PM
Where did you get the neo motor?

JL Audio
10-03-2012, 08:03 PM
Where did you get the neo motor?

he probably made it, he does that from time to time.

Bettr n' Revrse
10-04-2012, 02:27 AM
Ooooo I may want one any trades??

funky waves
10-04-2012, 12:22 PM
Ooooo I may want one any trades??

Only trades I'd be interested right now would be parts for my Planned big block Chevy engine biuld up.

funky waves
10-04-2012, 01:02 PM
Looks like an LA Storm neo motor.

And shipping moofers to the US bites donkey balls. Should keep em up here in the frozen.

If thats an offer.....

These are not that large or heavy, the ceramic would be ~$40-60 to ship to most US adresses, Neo would be $35-45

BTW the Neo is pending sale.

CHEMMINS
10-05-2012, 12:40 AM
I gots 2 silver tops I gotta pay for first.....lol.

Bettr n' Revrse
10-05-2012, 07:37 AM
Only trades I'd be interested right now would be parts for my Planned big block Chevy engine biuld up.

Well hmmmm I have a few custom 8's sitting around and that would be an interesting addition...

funky waves
10-06-2012, 01:37 PM
BTW I will throw in a couple spare VC's to go with each of these, in case they ever need reconing.

funky waves
10-08-2012, 12:20 PM
Open to offers

funky waves
10-10-2012, 01:14 AM
How about $225ea

akheathen
10-10-2012, 07:53 AM
gen 1 bb? carbed?

Bettr n' Revrse
10-10-2012, 08:00 AM
Did the neo get taken?

funky waves
10-10-2012, 12:34 PM
akheathen; Yah, all I dont really have lined up already is a nice ~800cfm carb, and a nicer than stock oil pan. Oh and some 2" primary full length headers(shipping might be killer from the US for this).

bettr n' revrse; Neo is pending but if you want dibs, if it falls through

funky waves
10-11-2012, 11:57 AM
Did the neo get taken?

You can have the neo, Guy who said he was sending me money for it hasn't got back to me for couple days, and Ive seen him post recently :confused:

silvercookie
10-14-2012, 07:06 PM
What size box would the ceramic need ported?

funky waves
10-14-2012, 10:15 PM
What size box would the ceramic need ported?

depends on what you want, as small as 20L works well, up to 40L. Tuned anywhere from 25(SQ)-60hz(SPL).

funky waves
10-17-2012, 01:23 AM
Both still up for offers

funky waves
10-19-2012, 04:22 PM
Need these gone, $190ea OBO!!!!!

funky waves
10-23-2012, 02:37 PM
Don't be afraid to lowball, I need these gone. And I hate Ebay,,,

marleyskater420
10-23-2012, 06:07 PM
akheathen; Yah, all I dont really have lined up already is a nice ~800cfm carb, and a nicer than stock oil pan. Oh and some 2" primary full length headers(shipping might be killer from the US for this).

bettr n' revrse; Neo is pending but if you want dibs, if it falls through

if you were going EFI I'd have a brand new Aeromotive A1000-6 AFPR and 2 inline fuel filters to offer..

or a modded Weldon 2345A :D

funky waves
10-26-2012, 08:05 PM
if you were going EFI I'd have a brand new Aeromotive A1000-6 AFPR and 2 inline fuel filters to offer..

or a modded Weldon 2345A :D

Yah not doing EFI.

Do I need to make these free? How about $300 shipped in north America for both!

funky waves
10-29-2012, 11:26 PM
bump

marleyskater420
10-30-2012, 10:01 PM
Ygpm

funky waves
11-03-2012, 11:15 AM
still here

CerwinVega_Fan
01-12-2013, 08:10 AM
u ever sell these?

marleyskater420
01-12-2013, 03:40 PM
Yea I bought these and they showed up with both ripped surrounds, and the regular motor had the basket broken off about 3". We filed an insurance claim but I havent heard anything in about a week.

Bettr n' Revrse
01-12-2013, 04:01 PM
Yea I bought these and they showed up with both ripped surrounds, and the regular motor had the basket broken off about 3". We filed an insurance claim but I havent heard anything in about a week.

Wow ****** deal man... Any word from OP?

marleyskater420
01-12-2013, 04:34 PM
He filed the insurancr claim, and I filled out the paperwork and sent it to the shipping company. He said a few days ago(last week) that he would check on it. I haven't heard anything. I got these over a month and a half ago.

So I spent 300$ on two motors for 8's and a basket..

At the beginning he was helpful. Now I haven't heard anything.

mylows10
01-12-2013, 04:39 PM
international shipping claims are crap ,no one wants to take responsibility for the damage ,i had one with some stuff in sent to canada thru usps and it took 6 months before finally resolved .hope it works out for you taylor .good luck .

CerwinVega_Fan
01-12-2013, 06:00 PM
Yea insurance claims may take a while.

Took them about 4 months when my 3hp neo motor showed up damaged.

marleyskater420
01-12-2013, 11:29 PM
Yea i took pics of the box, subs, and all rhe packing material as soon as i opened it. So they had tons of pics showin it was packed well.

Thanks guys for the words. Hopefully itll get resolved soon.