PDA

View Full Version : How do i use this crossover.



stay_high
09-25-2012, 05:08 PM
Got the PPI A2.65c component set. Dont understand how this crossover works and the manual/internet says nothing about it. So obviously i rune speaker wire from the amp to the "in" terminals But one terminal is labeled "wf tw-" So i plug the tweeter negative AND the woofer negative into the same terminal?? Doesnt seem right.. Then the tweeter + into the 0db or the +3db? Whats the difference? Thanks for the help.
26536342

mylows10
09-25-2012, 05:10 PM
+ 3 will be louder and more harsh in some applications.use the 0 output

stay_high
09-25-2012, 05:11 PM
+ 3 will be louder and more harsh in some applications.use the 0 output

Ok and i plug in both the tweeter and woofer negative to the same terminal?

mylows10
09-25-2012, 05:15 PM
Ok and i plug in both the tweeter and woofer negative to the same terminal?

its prolly a common ground so ok

TheUnderFighter
09-25-2012, 05:45 PM
Ok and i plug in both the tweeter and woofer negative to the same terminal?

Yea, that's what it looks like. I've never seen it before, but just follow what it says, no problems :)