PDA

View Full Version : 4th order for 2 SA 12's design help



mca2012
09-24-2012, 12:22 AM
im looking to make a 4th order for my 2 sundown SA 12's and put it in my trunk of my honda accord. i wanna have it so i use up most to all of the trunk. if any one has done a design for 2 of these can you post the measurements of the box internal and external. my max dimensions to work with are (33 1/2 D x 36 W x 17 H) also can you post the port length and dimensions because im going for a 50hz tuning so my low end is arounf 20hz -30hz but i can still hit those mid-lows like the 45hz to 80hz. i really need help this is my first box build ever and i wanna make sure its done correctly. im powering these beasts with a hifonics bxi 2061d amp pushing 2400 watts rms at 1 ohm.

mca2012
09-24-2012, 12:26 AM
the specs of the sundowns are
re:4.57 ohms
fs: 33.71hz
VAS: 21.21 liters
Qes: 0.58
Qms: 5.34
Qts: .52
Le: 3.40 mh
BL: 21.64 NA
Mms : 280g
Sens: 83.21 decibals

Flastrongman
09-24-2012, 11:08 PM
why not buy a good design? There's lots of designer's on here that will do a design for a very reasonable price.

Kangaroux
09-24-2012, 11:10 PM
do seperate sealed chambers @ 1 cube each and stuff 1lb of polyfill in each chamber. On the ported side go with 4 cf, and tune it to 48-50hz. To get reall ******, go 6cf on the ported side, if you have room. That will be even more efficent and get as loud as you can stand it. I can work something ouit for you, as far as a design. Send me a pm my guy


Nick

Why would you use poly fill on the sealed side when you can make it as big as you want and not need poly fill?