PDA

View Full Version : Sundown Yard Sale : 9/17/12



sundownz
09-17-2012, 12:19 PM
This main thread is over here :

Sundown Yard Sale : 9/17/12 - SPLBassX.com Forums (http://www.splbassx.com/forums/index.php?showtopic=11996)

I will only be updated that thread as inventory changes to keep things simple.

For reference below is a copy of the post as of today @ 11:19 AM

-----

Finally took some time to clean up all the back rooms / corners of the shop even more so than the last few times to pick up some stuff that has been there for years. Also a good bit of new b-stock / QC reject items available.

DO NOT ASK ABOUT SPECIFICS -- WE WILL NOT ANSWER QUESTIONS ABOUT WHAT IS SPECIFICALLY WRONG WITH EACH ITEM. They are so cheap to avoid sorting through it all.

----------

First up are the QC reject items just like the last yard sale. Different from last time there will be SOME regular b-stock and/or used items in this stack... but assume that it will have QC reject issues and that you may get a bonus.

"These items would mostly have minor *functional* issues such as a tick at high excursion, a rattle, messed up terminal, or something like that. Most of them not really major (you can check prior yard-sale threads; most customers are pleased with the outcome) but I do not plan to sort through them. These are not our typical b-stock which are cosmetic only -- most of these do have some sort of functional issue as noted. There may be other minor issues as well but for these prices I am not going to list them specifically.

We will NOT be re-coning any of these before shipping. We can sell the sub and you can order a re-cone kit separately, though.

This is what I have along with SHIPPED cost in continental USA (this first post will be updated as items sell as quickly as possible) :

Payments to be made via Paypal ONLY to [email protected].. for these items I will not run a credit card; I will only take direct Paypal. First come / first serve basis. If I sell more than I have the newest payment will be refunded. I will only ship these to the continental USA for this purpose.

If you send a Paypal payment with NO ADDRESS it will be refunded -- we will not try to contact you. Make sure you address is included on the payment.

All pricing is FIXED -- there are no further discounts.

These items are ALL sold AS-IS with no guarantee. Most of them do in fact play but may have issues such as ticking and whatnot as mentioned above; but there is NO guarantee.

All models have re-cone kits available."

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6494.JPG

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6496.JPG

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6497.JPG

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6498.JPG

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6491.JPG

SA-12 D2 - $95 x 2
SA-12 D4 - $95 x 15+
SA-10 D2 - $85 x 2
SA-10 D4 - $85 x 6

SD-2 10 D4 - $75 x 3
SD-2 10 D2 - $75 x 4
SD-2 12 D2 - $85 x 1

E-15 D2 - $70 x 1
E-10 D4 - $50 x 1
E8 v2 D2 - $45 x 3
E8 v2 D4 - $45 x 12

SA-8 v.2 D2 - $85 x ~20
SA-8 v.2 D4 - $85 x ~20

SA-8 v1.5 D2 - $65 x 5
SA-8 v1.5 D4 - $65 x 13
-----------------------------

Next up I have a stack of blown stuff and/or stuff that I just don't know what the deal is... you can assume that 100% of this is used / scuffed / blown / whatever (so, obviously, there is NO WARRANTY or guarantee on these items). It was collected from all corners of the shop while we cleaned up to prepare for our recent containers. For these items assume you are only getting a motor... most of them have good baskets (NOT ALL), some of them may just be used / prototypes, may work okay, or partially, but I have no idea and will not investigate. Just needs to go!

Same payment / contact information as above :

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6492.JPG

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6493.JPG

http://www.sundownaudio.com/fs/YardSale_9-17-12/CIMG6495.JPG

SA-15 : $75 x 12
SA-12 : $65 x 23
SA-10 : $60 x 18
SA-8 v1 or v1.5 : $40 x 20+

E-15 : $45 x 5
E-12 : $40 x 6
E-8 v.2 : $30 x 19
SD-2 10 : $50 x 3
SD-2 12 : $55 x 2

West
09-17-2012, 12:30 PM
:p: mmm B- stock

rebelfromva
09-17-2012, 12:35 PM
So what I am getting out of skimming all that is y'all are selling items that need fixing and are not willing to tell the customer the problem?

sundownz
09-17-2012, 12:40 PM
So what I am getting out of skimming all that is y'all are selling items that need fixing and are not willing to tell the customer the problem?

That is correct. The description is pretty thorough of what the possibilities are.

We've ran several of these sales and customers are quite pleased with what they get @ the price -- if I am going to pay someone to check, label, and list every single item and every detail they certainly won't be so cheap.

West
09-17-2012, 12:42 PM
So what I am getting out of skimming all that is y'all are selling items that need fixing and are not willing to tell the customer the problem?

It's a mystery! If I was doing a SPL build I would give one or two a shot.

rebelfromva
09-17-2012, 12:46 PM
That is correct. The description is pretty thorough of what the possibilities are.

We've ran several of these sales and customers are quite pleased with what they get @ the price -- if I am going to pay someone to check, label, and list every single item and every detail they certainly won't be so cheap.

I just had to clarify that I was reading correctly. They are prices good. I just wish yall already knew of any problems. It's nice to get a deal but not when you have to pay someone for a recone!

Also Jacob, I was wondering what the safest you have heard being put on a zv3?

akheathen
09-17-2012, 12:46 PM
well, no way i will register to another **** site just to catch a thread on this site.... anyways, i want a b-stock e-8, and an "unknown" e-8...(pretty, pretty please let it have decent soft-parts, if possible) shipping is gonna be the snaffoo...may have to use an intermediary..

sundownz
09-17-2012, 12:50 PM
If anyone is seriously interested and wants to investigate further there are several threads on CACO and one on SMD of previous Yard Sale events -- sometimes the customers can't figure out what is wrong with the items at all as our QC tests are pretty strenuous. As indicated it's most likely something like a coil tick or a rattle (loose dust cap, excess glue on spider rolls, etc). Usually not terrible but not something we would sell as new to a customer even if it's fixable.

sundownz
09-17-2012, 12:51 PM
I just had to clarify that I was reading correctly. They are prices good. I just wish yall already knew of any problems. It's nice to get a deal but not when you have to pay someone for a recone!

Also Jacob, I was wondering what the safest you have heard being put on a zv3?

Customers run anywhere from 1k to 5k on them depending on application. Our rating is designed around being 100% safe no matter what the application may be. I would venture to say that 75% of customers do use 2k+ on them.

J31Rob
09-17-2012, 01:23 PM
I just had to clarify that I was reading correctly. They are prices good. I just wish yall already knew of any problems. It's nice to get a deal but not when you have to pay someone for a recone!

Also Jacob, I was wondering what the safest you have heard being put on a zv3?

You cannot possibly be serious? For $65 shipped + price of recone you can have a brand new SA12 for almost $100 than a BNIB SA12. You're looking for something to complain about.. go somewhere else.

J31Rob
09-17-2012, 01:25 PM
If anyone is seriously interested and wants to investigate further there are several threads on CACO and one on SMD of previous Yard Sale events -- sometimes the customers can't figure out what is wrong with the items at all as our QC tests are pretty strenuous. As indicated it's most likely something like a coil tick or a rattle (loose dust cap, excess glue on spider rolls, etc). Usually not terrible but not something we would sell as new to a customer even if it's fixable.

While everyone appreciates you explaining yourself.. you really don't need to. At these prices.. who cares what it wrong with them? I got 2 motors, baskets w/all new parts (cooling plate, etc) for $130 shipped. Prior to that I was looking to spend $150 + shipping for JUST MOTORS. No brainer to any knowledgeable audio guy if you ask me.

rebelfromva
09-17-2012, 01:39 PM
You cannot possibly be serious? For $65 shipped + price of recone you can have a brand new SA12 for almost $100 than a BNIB SA12. You're looking for something to complain about.. go somewhere else.

How about you fvck off. I was just clarifying something. Yeah the recone may be cheap but I'm not going sit here and waste money by fvcking it up. This is a vendor thread anyways why are you addressing me and not Jacob?

dragnix
09-17-2012, 01:48 PM
if only I had the money to blow :(

sundownz
09-17-2012, 02:43 PM
if only I had the money to blow :(

I'll probably have a yard sale as a fairly regular thing from now on to avoid it piling up so much -- so just stay tuned when you do have a few extra dollars :)

dragnix
09-17-2012, 03:13 PM
I'll probably have a yard sale as a fairly regular thing from now on to avoid it piling up so much -- so just stay tuned when you do have a few extra dollars :)

I like that idea sir

AwesomeStranger
09-19-2012, 05:10 PM
Jacob could you ship the sub to splaudio instead of myself? I could have him beef up a sa-12 or something for me, cheaper than buying new + It would be a 2000w rms sub. :D

skylineTT
09-19-2012, 05:41 PM
I could see Corey getting a lot of business out of these sales. Lol
SPLaudio;

sundownz
09-19-2012, 06:12 PM
I can send to Corey if you put that in the notes.

SPLaudio
09-19-2012, 10:17 PM
i cant make it a 2000rms sub even though i have rebuilt sa subs to handle 5k clamped power for burps.

anybody wants any of Jakes motors rebuilt to stock or customs we can make this happen!

motor get to me and 3-5biz days it ships back out,very fast turn around ;)

Hall_393
09-21-2012, 12:15 PM
Sending payment for 4 sa 8 d4s

TheUnderFighter
09-21-2012, 01:07 PM
i cant make it a 2000rms sub even though i have rebuilt sa subs to handle 5k clamped power for burps.

anybody wants any of Jakes motors rebuilt to stock or customs we can make this happen!

motor get to me and 3-5biz days it ships back out,very fast turn around ;)

****, I wish I would have thought of that when I ordered mine.

SPLaudio
09-21-2012, 01:28 PM
^ if Jake hasnt shipped yet he can send to me or you can still ship to me ;)

ewadz3006
09-22-2012, 05:26 PM
how much for shipping to zip code 16401? i'd like a price on 1 sa 12, and a price for two. thnks
email is [email protected]

dragnix
09-22-2012, 05:29 PM
how much for shipping to zip code 16401? i'd like a price on 1 sa 12, and a price for two. thnks
email is [email protected]

Read the post, all prices include shipping...unless you're not part of the continental US

ewadz3006
09-22-2012, 05:41 PM
Read the post, all prices include shipping...unless you're not part of the continental US

I guess I read it wrong.(" along with shipped price") it didnt say shipped or shipping included.

CJL
09-30-2012, 08:05 PM
sundownz ;

Whats the average timeframe to receive a tracking number or conformation of payment?

Hall_393
10-01-2012, 10:58 PM
My first set I didnt receive a tracking number until they were at my door which is when they sent the tracking number for both
I have got all 4 subs within 10 days
And have to say they look good and work great

04silverz
10-02-2012, 10:19 AM
damnit. I have absolutely zero need for these right now but have been eyeballing the sa 8 ever since the v1 came out. ive always wanted to run a pair, or more, of 8's but never have gotten around to it. guess now's as good a time as any...now to start looking for box specs/designs for a pair in a silverado

sundownz
10-02-2012, 10:21 AM
sundownz ;

Whats the average timeframe to receive a tracking number or conformation of payment?

Couple days usually. I've been out of town for a week so possibly longer during that period.

04silverz
10-07-2012, 06:07 PM
Sa8 arrived yesterday and unbowed them today. Look great
Thanks.

Exist_ential
10-15-2012, 11:35 AM
sundownz;

are you going to post the new yard sale on here?

Flastrongman
10-15-2012, 04:28 PM
Yo Jake have the quantities been updated recently?

04murdalanche
10-18-2012, 04:01 AM
Emailed you sundownz ; wanting 2 SA 8 v2 D2. Get back to me as soon as you can and I will send payment!:santa:

sundownz
10-18-2012, 10:19 AM
Yo Jake have the quantities been updated recently?

I updated a new thread on BassX -- not all QTY are current but you can check in with us about it :)

Sundown Yard Sale : 10/10/12 - SPLBassX.com Forums (http://www.splbassx.com/forums/index.php?showtopic=12069)

Theride
10-20-2012, 01:15 AM
so what you are saying is its not a guarantee that if i get one of those SA10 it will play? Help me to understand this as ive never gone the used/b stock with any sub.

plugitin
10-20-2012, 12:38 PM
Think ill be picking up a few 8s ;)

sundownz
10-21-2012, 02:51 PM
so what you are saying is its not a guarantee that if i get one of those SA10 it will play? Help me to understand this as ive never gone the used/b stock with any sub.

As stated; there is no guarantee with any of the items.

Theride
10-21-2012, 08:06 PM
As stated; there is no guarantee with any of the items.
ok

Thumpersplbassx
11-28-2012, 01:08 AM
I could do something with the sa8v2's d2, d4's along with the sa 12" d4's if there's still enough left.

Youngin
12-10-2012, 07:43 PM
still have any sa 12s?