PDA

View Full Version : RF HX2 or DC Level 3?



ancorp
09-10-2012, 10:29 PM
So I just picked up a pair of NIB (never used) year 2000 RF Punch HX2 15s.

The biggest box that'd possibly fit into my car would be exactly to their manual spec. 2.5 cubes net each, 4" aero port each (intend to to tune to 30-32)

Or I keep the box I have in the car already (for two 12", around 1.85 cubes net each, 32hz, 64" port area) and buy a pair of DC Level 3 12s (older gen, 600w RMS).

Either pair will be receiving 1.5kw of power.

So what would you guys do? I know the DC subs are more beastly, and will take more abuse and power then the Rockfords, but it is much more cone area on those 15" HX2s. My goal is SQL.

slvrado28z
09-12-2012, 11:51 AM
sell me the hx2's and get the lvl3..

goingdef
09-12-2012, 11:53 AM
I just got rid of two 12" hx2's for two T1 12"s the hx2's don't seem to have the same sound quality as other woofers they do get loud but if I where you I would sell while there in there peak condition.

wickedwitt
09-12-2012, 11:55 AM
You should be able to do more on both sides of the SQL (sq and spl) with the HX2s. They are no match for the old Power HX2s but still a wonderful sub. Definitely be enhanced by the larger cone area. With the same power, they should by all means beat the Lv3s hands down.

ancorp
09-12-2012, 05:13 PM
Thanks guys. It sure is something to think about.

But if I stepped it up to 3kw, then the DCs would be by far better for that kind of power then the Punch HX2s yes? They both have 3" 600w RMS rated coils but I take it the more modern DC subs have better thermal handling.

ace_800
09-12-2012, 05:15 PM
If they were the power HX2's, I'd no question run those. However being the punch I'd sell and go with the DC's.

mylows10
09-12-2012, 05:25 PM
if your thinking about running 3k of power ,better get the new dc lvl3 with lvl 4 upgrades ,or just get the lvl 4 subs m2 of course