View Full Version : yet another design...
DbDesigns
09-02-2012, 10:20 PM
http://i1161.photobucket.com/albums/q513/bumpin101/412s.png
not mine this time lol
4 sa12's
7.58 cu ft net
tuned to 32
147sq inches of port
19.39 per cu ft
designed to be a grounpounder...
opinions??
dbeez
09-02-2012, 10:21 PM
No.
DbDesigns
09-02-2012, 10:22 PM
yes.
DbDesigns
09-02-2012, 10:29 PM
3k for teh powa.
dbeez
09-02-2012, 10:34 PM
No another ranger danger fail.
DbDesigns
09-02-2012, 10:38 PM
No another ranger danger fail.
its for a 98 k1500. not mine. im walling fool.
dbeez
09-02-2012, 10:40 PM
Off axis ain't gonna cut it properly.
DbDesigns
09-02-2012, 10:45 PM
Off axis ain't gonna cut it properly.
gonna have to. mylows10 ;
thevic24
09-02-2012, 10:46 PM
Loading problems?
DbDesigns
09-02-2012, 10:47 PM
Loading problems?
would be worse if I put them all on one baffle... the guy is set on 4 12s... under the window line.
Bettr n' Revrse
09-02-2012, 10:49 PM
Fail
thevic24
09-02-2012, 10:50 PM
would be worse if I put them all on one baffle... the guy is set on 4 12s... under the window line.
How about 2 chambers and 2 ports or subs on one baffle and using 2 ports, one on each side?
DbDesigns
09-02-2012, 10:51 PM
[QUOTE=thevic24;8144706]How about 2 chambers and 2 ports or subs on one baffle and using 2 ports, one on each side?[/QUOTE
meh. one port is more efficient...
DbDesigns
09-02-2012, 10:52 PM
[QUOTE=thevic24;8144706]How about 2 chambers and 2 ports or subs on one baffle and using 2 ports, one on each side?[/QUOTE
meh. one port is more efficient...
DbDesigns
09-02-2012, 11:00 PM
this is the best that I could do with 4 12s... im trying to talk him into something else though...
What's the depth of the box?
Why in the world so much port area?
DbDesigns
09-03-2012, 12:25 AM
wut?
pro-rabbit
09-03-2012, 12:27 AM
I didn't read the specs or anything, I'm on my phone in traffic, but the design..nope no go on that one.
DbDesigns
09-03-2012, 12:35 AM
what will cause it to not work?? i need to know so I can further muh nallidge.
mlstrass
09-03-2012, 01:24 AM
assuming the motors have clearance it should be fine. I've seen/heard a few daily set ups this year with 2 subs up/1firing back and they were loud.
Burp guys in CRX's do it all the time, but I know that's diff then daily...
DbDesigns
09-03-2012, 01:27 AM
assuming the motors have clearance it should be fine. I've seen/heard a few daily set ups this year with 2 subs up/1firing back and they were loud.
Burp guys in CRX's do it all the time, but I know that's diff then daily...
ive seen it done too. but I have never done it...
mlstrass
09-03-2012, 01:30 AM
ive seen it done too. but I have never done it...
only way to find out for sure is to build it. double check box/sub specs to make sure motors won't hit...
DbDesigns
09-03-2012, 01:31 AM
only way to find out for sure is to build it. double check box/sub specs to make sure motors won't hit...
they wont. already made sure lol
mlstrass
09-03-2012, 01:39 AM
Guy at a show a few weeks ago had 3 DD 9512's in the trunk of a new challenger. 2 up/1 back.....**** was violent, broke his trunk latch and tore the sheetmetal about 3" long by the sunroof.
All the hood dudes were going nuts over his rattles/flex
DbDesigns
09-03-2012, 01:42 AM
Guy at a show a few weeks ago had 3 DD 9512's in the trunk of a new challenger. 2 up/1 back.....**** was violent, broke his trunk latch and tore the sheetmetal about 3" long by the sunroof.
All the hood dudes were going nuts over his rattles/flex
if it was my box I would try it out but I want something that is certain being that this is a paying customers build...
mlstrass
09-03-2012, 01:47 AM
if it was my box I would try it out but I want something that is certain being that this is a paying customers build...
Other setup I've heard is 3 SA-12's in the trunk of a grand amp. Meters around a 47-48. 2 subs back/1sub up....
what are the goals for this box? If just a daily then I think it should be fine. Nobody can tell you for sure unless they've built that same box for the same subs in the same vehicle.
---------- Post added at 12:47 AM ---------- Previous post was at 12:46 AM ----------
I think you just don't want him to be louder then you....
DbDesigns
09-03-2012, 01:49 AM
Other setup I've heard is 3 SA-12's in the trunk of a grand amp. Meters around a 47-48. 2 subs back/1sub up....
what are the goals for this box? If just a daily then I think it should be fine. Nobody can tell you for sure unless they've built that same box for the same subs in the same vehicle.
---------- Post added at 12:47 AM ---------- Previous post was at 12:46 AM ----------
I think you just don't want him to be louder then you....
trust me... he wont be louder than me lol. im walling with 10k and 2 18s brah lol. but the only things that I am worried about are phase and loading issues... but I think I may try this one and see....
trust me... he wont be louder than me lol. im walling with 10k and 2 18s brah lol. but the only things that I am worried about are phase and loading issues... but I think I may try this one and see....
If it works or not, I gotta give you some props for designing a box and following through. Takes some creativity and trial and error (or so I would guess).
DbDesigns
09-03-2012, 01:56 AM
If it works or not, I gotta give you some props for designing a box and following through. Takes some creativity and trial and error (or so I would guess).
bro I have designed many a box... just ask around... and I have built about 80% of the ones that I design lol
mlstrass
09-03-2012, 01:58 AM
trust me... he wont be louder than me lol. im walling with 10k and 2 18s brah lol. but the only things that I am worried about are phase and loading issues... but I think I may try this one and see....
assuming you have a ranger it won't be loud sealed up, they ****. And that's a beginner wall :p:
build the box, I think you'll be happy with it
Right on. Didn't know your background. I gotta say its pretty cool though and would like to give it a try if I had more room in my car to play with.
DbDesigns
09-03-2012, 02:02 AM
assuming you have a ranger it won't be loud sealed up, they ****. And that's a beginner wall :p:
build the box, I think you'll be happy with it
I dont fvck around with meters. im a daily monster kind of guy. it will however be loud outlaw. right now im just throwing 2 AA chaos 18s in there and my saz3500 for now... when I get another alt im going with a dc 10k and apxx 18s... again. I love them dern things.
---------- Post added at 02:02 AM ---------- Previous post was at 02:01 AM ----------
Right on. Didn't know your background. I gotta say its pretty cool though and would like to give it a try if I had more room in my car to play with.
you want help all you have to do is pm. im still learning every day though from people like buck and pro-rabbit. also two very good guys to learn from.
mlstrass
09-03-2012, 02:10 AM
I dont fvck around with meters. im a daily monster kind of guy. it will however be loud outlaw. right now im just throwing 2 AA chaos 18s in there and my saz3500 for now... when I get another alt im going with a dc 10k and apxx 18s... again. I love them dern things.
---------- Post added at 02:02 AM ---------- Previous post was at 02:01 AM ----------
you want help all you have to do is pm. im still learning every day though from people like buck and pro-rabbit. also two very good guys to learn from.
should be a fun demo set up. I walled a caddy a few years ago with 2 9518's and 4 AQ3500's, fun *** car.