Whats better binding post ot terminal cups?

[t-scene]

I'm building my box and I was wondering what is best to use binding post or terminal cups?

I was looking these:
Madisound Speaker Store (http://www.madisoundspeakerstore.com/terminal-cups/input-cups-nr-cup/)

Dayton Audio BPA-38SN HD Binding Post Pair Satin Nickel 091-1247 (http://www.parts-express.com/pe/showdetl.cfm?partnumber=091-1247)

Is there a better way?

[Canaan]

I don't use either.

Drill a hole in the box just big enough for your speaker wire to fit. Run wire directly from the sub to the amp thru the hole.
Seal the hole w/ either caulk or hot-glue. Cheaper and a better connection.

[cyn]

2"Length All Thread, 1/4-1/2" thick, 1-1/2" Washers, 1" Locking Washers, and Nuts to fit the All Thread.. might run you oo $8 or so

[maylar]

1/4" brass bolts pounded into the hole from the inside of the box. Washers, lockrings, nuts etc on top. All available from the plumbing section at the Depot.

[RAM_Designs]

I don't use either.

Drill a hole in the box just big enough for your speaker wire to fit. Run wire directly from the sub to the amp thru the hole.
Seal the hole w/ either caulk or hot-glue. Cheaper and a better connection.

This, direct to the sub FTW.

[SourDeez]

i have no hole or terminals on my box.

my speaker wire goes directly to the subs through my port.. haha it works great doesnt slap around or anything