PDA

View Full Version : need advice on my new box



frogcase2002
07-24-2012, 11:53 PM
Looking for tips on what else needs done to complete the box in my trunk if anything, its for my 15 zcon, 4.4 cubes tuned to 32, built it in the trunk then have one layer of fiberglass on all corners, just seeing if anyone sees anything wrong or anything to add to make it better,, and you think i should put the sub on the baffle before i put it on the box or what

frogcase2002
07-25-2012, 12:52 AM
anyone? look good? bad?

slvrado28z
07-25-2012, 12:58 AM
why did you use fiberglass may i ask

frogcase2002
07-25-2012, 01:03 AM
why did you use fiberglass may i ask


i just had alot of resin and mat and stuff from another project im working on and figured it would make it stonger and make the corners more rounded, anything wrong with using it?

frogcase2002
07-25-2012, 03:10 PM
so i guess its perfect then

Durango03
07-25-2012, 03:16 PM
By no means am I an audio expert like some members here. With that being said I once read a thread were a member suggested placing a vacuum cleaner hose on the box and observing the air that is able to be pulled from the inside of the box. They then suggested placing a small coat of resin to the entire inside of the box to prevent any lose. Makes sense I suppose? But again, Im no expert..

dbeez
07-25-2012, 03:18 PM
Well you have definitely sealed your trunk off backwards

frogcase2002
07-25-2012, 03:27 PM
Well you have definitely sealed your trunk off backwards


yea kinda looks like it but there is probley at leat 6 inches on each side and i took the spare tire out so there is a pretty big opening under the box from in front of the box to almost all the way to my back seats that fold down

dbeez
07-25-2012, 03:32 PM
Should have built it the other way seriously.

frogcase2002
07-25-2012, 03:42 PM
Should have built it the other way seriously.

i was thinking that for a while but iv turned boxes around in that car before and they wouldnt sound as good

dbeez
07-25-2012, 03:49 PM
You have pretty much killed the airflow

frogcase2002
07-25-2012, 05:43 PM
You have pretty much killed the airflow


there is a pretty big open area going under the box though

frogcase2002
07-26-2012, 06:13 PM
anything else i should do befor i put the front on my box, just want it to be a good as possible