Cadence Processor/Crossover with Time Alignment. WTT/WTS

[Joseph7195]

Cadence CVL2XR

Specifications:
• THD&N: <0.04%
• Input Range for 9V Output: 0.2v – 9V
• Output Impedance: 100 Ohm
• Input Impedance: 30 kOhm
• SNR, A-weighted: 83dB
• Combined Frequency Response: 10Hz – 53 kHz
• Separation: >60dB
• Channel Balance: <0.2dB
• Delay Variation: 0 – 300°
• HP and LP Frequency Ranges: 2 kHz – 5 kHz
• HP and LP Frequency Slope: 24dB / Octave
• Subsonic Filter Range: 10Hz – 250Hz
• Subsonic Filter Slope: 12dB / Octave
• Bass Focus Rumble Boost: +7dB Max
• Fuse: 0.5 amp
• Ground Isolation: 1 kOhm

Features:
• Programmable Crossover with 24dB per Octave Slopes
• Tactile Feel Fully Adjustable Frequency Controls
• Left & Right Adjustable Delay Controls
• Sound Stage Digital Image Processor
• Bass Focus® Control
• 9-Volt Line Driver
• Fully Isolated DC-DC Power Supply
• Adjustable Subsonic Filter
• Left & Right Output Level Controls with CLIP Indicators

This is BNIB and has never seen power. I still have the original receipt and the unit is still under warranty. I have tried a million time, but I cannot make this work with what I need. I kinda bought it to make sure I had it if I needed it.


I am trading for a 15" sub or motor and basket I can build into a nice beefy sub. I would prefer one whole 15 or two motors and baskets. I am gonna be running 15's or 18's so i really don't mind. Just offer up what you have and maybe we can work something out. I am really easy to work with. And sexxy too. :naughty:


UPDATE: I am being a little more open with trades. Including amps too. And also other subs, including 3" coil subs and motors. Maybe naked pics too.
Pics!!!


http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale018.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale017.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale001.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale008.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale011.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale012.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale016.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale015.jpg

http://i142.photobucket.com/albums/r105/joseph7195/cadence%20processor%20trade/cadenceprocessorsale014.jpg

Thanks for looking!!!

[Joseph7195]

Taking trades, just offer up! All I can say is no. I honestly want to run the new Cadence SP4's but they aren't going to be out for a while, so I will actually look at all sub and motor trades, or amps.

[Joseph7195]

bump

[Joseph7195]

evening bump

[pickup1]

hell they are only 65 new,what do you want for it?

[Joseph7195]

Yeah, I didn't realize till earlier today that Audiosavings were selling them at cost. It's a really cool processor, but I honestly really have no need for it. So I am open to trades from anybody. There are some things I don't need, like a headunit and wire. But I kow someone out there has no money, needs a processor with Time delay, and has a broke *** burnt up sub they don't need. I would even take an offer of cash, because this is why we start these threads. If you have anything, hit me up. I promise it works and is still under warranty and BNIB.

[pickup1]

trying to find something..want a klw processor like a epicenter?or need a diff type of crossover?

[Joseph7195]

If you got something like a 3-way crossover, that would do. Or some blown sub somewhere

[pickup1]

i just got 1 today,let me open the box...

[newpen]

help me?

[Joseph7195]

Sure Bro, PM me and I will help you out!

[pickup1]

Heres a group shot of what came today.
http://i163.photobucket.com/albums/t293/jdpickup1/photo2-1.jpg

[Joseph7195]

Heres a group shot of what came today.
http://i163.photobucket.com/albums/t293/jdpickup1/photo2-1.jpg


That's a heck of a lot! It's kinda hard to make out which one is which, but which one were you thinking about trading? If you were thinking of trading :)

[pickup1]

The image one is like a esp2..spacial widener for soundstage.
Phantom is like a epicenter
Subwoofer is sub crossover
Last on the the 2-3 way xover

[Joseph7195]

I could be interested in the Image or the 2/3 way crossover. I will have to know the models and stuff and have to look them up and see the specs and actual the uses for them. I honestly don't know much about them :crap:

[pickup1]

. HZ XA-25 18db Two/Three way Electronic crossover.Main level adjustments with low/mid and high outsI ALSO HAVE THE ORIGINAL SWAPPABLE CROSSOVER RESISTORS AND MANUAL FOR DIFFERENT X-OVER FREQ.
HZ XA-27 24db electronic*subwoofer*crossoverLightly used, minimal scratchingMain level and bass level controlsCrossover frequency knob

[Joseph7195]

I think I can make the HZ XA-25 work. Wanna trade?

[pickup1]

Yup..let me test it out first and we can do something..

[Joseph7195]

Ha ha, you're an early riser too. I don't know if it was when i hit 30 or when I had a kid when I first became unable to sleep passed 5 in the morning. A quick question, would you like me to power this thing up? It's never seen power before and didn't know if you wanted me to do it first or if you wanted to pop it's cherry.

[pickup1]

Yea..need to go in early...we are going out of town today and will be back sunday. I'm usually up at 5:45 anyway..

[Joseph7195]

Back up!

[Joseph7195]

back to the top

[Joseph7195]

deez

[Joseph7195]

nuttz

[dross93ranger]

Good seller here!

[Joseph7195]

Thank you Mr. Daniel!

[Joseph7195]

Bump!! Still doing a Cadence SQ install, so if you got some Cadence Tweets or other Cadence speakers hanging around, that are in great shape, I would trade for those too

[HIWATT]

Hi pickup1, I signed up here just to respond to this thread. I actually was looking for a KLW XA-22 (Phantom) and saw another thread here with those same items for sale.

Are you flipping them?

I'd be interested in the Phantom if you are :cool:

[Joseph7195]

Hi pickup1, I signed up here just to respond to this thread. I actually was looking for a KLW XA-22 (Phantom) and saw another thread here with those same items for sale.

Are you flipping them?

I'd be interested in the Phantom if you are :cool:
pickup1 ; I think you have a customer!!


And bump, I still got this and looking for reasonable trades!!

[pickup1]

Dude.pm me and not clutter this mans thread...

[Joseph7195]

Saturday bump cause I am so sexxy, and sexxy is what make the world go round

[Joseph7195]

Bump!

[Joseph7195]

Bumpin

[Joseph7195]

Morning Wood Bump

[Joseph7195]

^^