PDA

View Full Version : FS : (2) Skar Audio SK-85.4 Class A/B Amplifiers



SkarAudio
07-18-2012, 01:47 PM
1. Product:

(2) Skar Audio SK-85.5 Class A/B Amplifiers

2. Specs:

RMS Power @ 4 Ohms : 85W x 4
RMS Power @ 2 Ohms : 125W x 4
RMS Power @ 4 Ohm Mono : 250W x 2

Frequency Response : 20~30k
Signal to Noise Ratio : 105
Damping Factor 200<
Low Level Input : 6V-0.2mV
Line Output : Yes

Channel 1/2 Crossover
High Pass Filter (@12dB Slope) : 50~5k Hz
Low Pass Filter (@12dB Slope) : 50~5k Hz
Bass Boost @ 45Hz : 0~18 dB
Channel 3/4 Crossover
High Pass Filter (@12dB Slope) : 50~5k Hz
Low Pass Filter (@12dB Slope) : 50~5k Hz
Bass Boost @ 45Hz : 0~18dB
Remote Level Control Included : Yes
Double Sided 1Oz Circuit Board
Power & Protection LED Indicators
4 Gauge Power & Ground Terminals
Dimensions : 350mm x 241mm x 64.5mm (L x W x H)

Fusing : 2 x 30 Amp (External)

3. Description/Condition:

Both are used but in 10/10 working and cosmetic condition! These were babied during there ~3 month use in my personal Ford vehicle. The vehicle was sold yesterday which is why I am selling them. I will include the standard warranty with purchase as well as all original packaging.

4. Price: :

$225 Per Amp SHIPPED, OBO. PM or Email me. (The SK-4500.1 in the first picture is NOT included in this sale - It is the 2 smaller amps that are the SK-85.4's below it!).

5. Pictures:

http://i1225.photobucket.com/albums/ee396/skaraudio/IMG_3704.jpg
http://i1225.photobucket.com/albums/ee396/skaraudio/IMG_2891.jpg
http://i1225.photobucket.com/albums/ee396/skaraudio/IMG_2892.jpg

2012ScionTC
07-19-2012, 01:01 AM
Kevin,

Sent e-mail to your Kevin@SkarAudio.com email account regarding one of the amps.

Thanks,

Rob

SkarAudio
07-19-2012, 10:48 AM
Kevin,

Sent e-mail to your Kevin@SkarAudio.com email account regarding one of the amps.

Thanks,

Rob

Replied.

Bump

2012ScionTC
07-19-2012, 12:35 PM
Okay, I was warned, and your reply looked more like an advertisement and I don't beleive you even took the time to read my email as you did not answer my questions in regards to power requirements on the electrical system or provide any further insight... So my assumption was you must have been too busy.

I'll look elsewhere... go with a known trusted brand, will probably end up with a Rockford T600.4 which was my thought.