PDA

View Full Version : 12 "idmax v3 and jl audio 12w6v2



newb
07-12-2012, 03:49 PM
Item(s) for Sale:
12" IDmax v3 dual 2ohm
1 12w6v2



Item(s) Description/Condition:

both subs are in excellent condition
12w6v2 is missing the logo

Price:

idmax $200 plus shipping/fees
12w6v2 $180 plus shipping/fees

Shipping and Miscellaneous Item Information:

i am located in the IE, so cal pickup and cash is preferred will ship on buyers dime.


Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

http://i185.photobucket.com/albums/x24/asdfaes/DSC02844.jpg
http://i185.photobucket.com/albums/x24/asdfaes/DSC04801.jpg

robertspangler
07-12-2012, 09:29 PM
trades?

newb
07-12-2012, 09:55 PM
no trades, cash only.

CerwinVega_Fan
07-13-2012, 02:57 AM
180 plus shipping for the pair of jl's?

newb
07-13-2012, 03:59 AM
No for 1 sub. The other sold.

*Ace*
07-14-2012, 04:54 AM
Really interested in the ID Max. How old is it? How many hours/days/months of play does it have on it? How much power did you have on it? Any cosmetic or mechanical issues?

Can you also provide more info on the JL as well?

Thanks

Bettr n' Revrse
07-14-2012, 05:05 AM
Whats the story on the box with the IDmax?

newb
07-14-2012, 10:44 PM
Really interested in the ID Max. How old is it? How many hours/days/months of play does it have on it? How much power did you have on it? Any cosmetic or mechanical issues?

Can you also provide more info on the JL as well?

Thanks

I can't really tell you how old the sub is, I bought it used from another enthusiast years ago. I'm currently giving it 1,000 watts @ 1ohm in sealed 1.25 cubed enclosure. No probelms comsetically or mechanically. Im still using it, until it gets sold.

As far as the JL goes, nothing wrong with it as well, only problem is the missing JL logo, other than that the sub is pretty much in mint condition. I don't even think the sub is broken in yet. I bought the subs when JL first introduced the w6v2 line, but never really ran it because it was installed in my project car, and the only reason why the logo came off was because of the heat. The glue pretty much melted off. The project is currently not even finished yet, but decided to change them out to a 10w7.


Whats the story on the box with the IDmax?

The enclosure is a 1.25 cubed sealed stuffed with polyfill.

newb
07-17-2012, 07:46 PM
bump.

wenn_du_weinst
07-17-2012, 07:48 PM
shipping to 57366 on idmax?

newb
07-17-2012, 08:42 PM
shipping to 57366 on idmax?

$40

*Ace*
07-27-2012, 04:50 PM
Is the ID Max still for sale?

newb
07-27-2012, 05:19 PM
Yes.

newb
07-27-2012, 05:20 PM
12w6v2 is sold! max still available.

*Ace*
07-28-2012, 03:08 AM
Can you provide more pics of the ID Max please? Pics of the magnet, spiders, coil etc just to see what condition everything is in.

*Ace*
07-30-2012, 03:25 AM
Im serious about buying if you can provide some more pictures to show the condition it's in......

newb
07-30-2012, 04:06 AM
I was busy this weekend and I couldn't get to it. I'll get pictures tomorrow. Pictures may not be well taken to show the coils, spider, etc, due to it already boxed up in a wooden crate, ready for shipment. I'll do my best to get you the pictures you want. That brings me to my next point, shipping could very well be in the $50 dollar range due to the weight of the sub plus the weight of the wooden crate it's being shipped out in.

newb
07-30-2012, 06:31 PM
ACE, these are the best pictures I can get. I assure you the sub is in perfect order! There is absolutely nothing wrong with it. The blue stuff you see on the basket is blue rtv gasket maker. The sub was mounted in a custom fiberglass enclosure and the rtv gasket maker was used to ensure there was an air tight seal. The sub was then moved to a regular 1.25 cubed mdf enclosure and I took what I could of the rtv off of the basket and mounting flange.

http://i185.photobucket.com/albums/x24/asdfaes/DSC04861.jpg
http://i185.photobucket.com/albums/x24/asdfaes/DSC04863.jpg

*Ace*
07-31-2012, 12:40 AM
****, one of the reasons I wanted an Id max was to install it inverted to show off the basket and magnet. But since it has all that stuff on it the best I could do is $200 shipped. Let me know if u want to do that

newb
07-31-2012, 01:01 AM
Sorry man, but the stuff comes off pretty easy if you use acetone.

*Ace*
07-31-2012, 01:24 AM
Cool not a problem. Let me know if u change your mind.

newb
08-03-2012, 12:36 AM
bump... idmax is still available.