View Full Version : RE AUDIO 8'' subs

07-10-2012, 04:11 AM
Item(s) for Sale:

RE AUDIO re series 8'' Dual 4ohm

Item(s) Description/Condition:
If I remember correctly these are the SE series. The subs were in a custom install that never got finished, they never saw over 100 watts rms (1/4 of the volume) due to the nature of the install. One sub has a bit of the hard foam cut off (about an 1" in length) and the other sub has 2 extra holes drilled on it. Mechanically these are 10/10, cosmetic I say 8/10.

Product Dimension 8"
Mounting Depth - 4"
Mounting Hole Diameter - 7.125"
Overall Diameter - 8.25"
Bolt Hole Circle - 7.75"
Motor Width - 4.875"
Motor Depth - 1.5"
Basket Depth - 2.5"
Displacement - 0.07 cu. ft.
Weight - 6 lbs.

T/S Parameters 8"
Electrical Q Value -Qes: 0.38
Mechanical Q Value -Qms: 4.21
Total speaker Q Value -Qts: 0.34
Free Air Resonance -Fs: 22.8 Hz
Equivalent Compliance -Vas: 27.1 liters
One-Way, Linear Excursion -Xmax: 12 mm
Efficiency -SPL 1W/1m: 81.2 dB SPL
Effective Piston Area -Sd: 195 cm^2
DC Resistance -Re: 3.2 ohm
Nominal Impedance -Znom: Dual 4 ohm
Thermal Power Handling -Pe: 175 W
Force Factor -Bl: 15.4

UPDATE!! Kicker Impulse x3i Crossover. I just found this crossover in my garage, it was working the last time I used it. However, I will be testing it just to make sure it works. I'll include with the SUB's for an extra $10.


$85 shipped for the pair plus $10 if you want the crossover.

Shipping and Miscellaneous Item Information:

Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

07-10-2012, 02:24 PM
why was there extra holes drilled in one of them?

07-10-2012, 05:00 PM
is the price for the pair?

07-10-2012, 05:19 PM
Looks like an RE RE 8"

07-10-2012, 05:22 PM
pic of motor too

07-10-2012, 06:35 PM
why was there extra holes drilled in one of them?

It was due to the nature of the install.

---------- Post added at 04:35 PM ---------- Previous post was at 04:34 PM ----------

is the price for the pair?


07-10-2012, 06:37 PM
Looks like an RE RE 8"
You might be right, I will post a pic of the motor, I remember throwing out the boxes and paperwork. There is no markings on the motor either.

07-10-2012, 07:29 PM
looks like the old school motors, anyone confirm that?

07-12-2012, 07:52 PM
Bump! Crossover added to sale.

07-17-2012, 09:03 PM

07-26-2012, 08:27 PM