03-29-2004, 12:19 AM
Well the other day i was hooking up a piezo siren to my Viper 690XV alarm. I cut the wire going to the siren that came with the alarm and spliced the piezo into it. i left the outside siren disconnected so icould test the piezo. Well when i first wired it i wired it backwards, the power on the piezo was grounded and the ground on the piezo was spliced into the power. I tested it and saw that the piezo didnt go off so i disconnected it and put the piezo onto my batt, it worked fine so it wasnt the siren. Well the wired the piezo back right this time and it still didnt work. Wtf? Well i then jus put the old siren back on sayin F it and it still didnt work. Maybe i messed up my alarm? Well i got out the car, armed it and hit the car and everything worked except the siren. Then all the sudden i hear a faint noise. Its the siren going off very faintly. Even if the alarm wasnt set it would go off very faintly. I checked all the grounded everything, i even took it to CC and they said i blew the brain. Anyone else have suggestions on what i can do?