PDA

View Full Version : 4kw Build in a Nissan Sentra SE-R Spec V



andale927
06-28-2012, 12:27 AM
Well I thought I would start a build log as I have never done one before. My old setup was 1 15 inch Fi BTL on a aq2200d with stock electrical. It wasn't enough. So I have decided to go with the loudest reasonable set-up I can get in my sentra without going crazy and cutting out my rear trunk brace to make a wall. Here is what's going in it:

2x 12inch AA Mayhem's (D1)
AQ3500D.1 Amplifier (4300W RMS @ 1 Ohm @ 14.4V)
Box 4.2 Cubic Feet tuned to 32Hz
Pioneer AVH-P4400BT Touchscreen Head Unit
Polk Audio DB5251 5.25in Component Speaker System
Pioneer 5500T 2 Channel Amp (125W x2 @ 4 Ohms)
270 Amp DC Power Alternator
XS Power D3400 Battery (Starter)
XS Power D3100 Battery (Trunk)
Over 75ft of 0 Gauge (100% Copper)

Well here is what I have done so far, more to come:

http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120510_235919.jpg

Head Unit Install:
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120512_121618.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120512_122508.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120512_150028.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120512_212557.jpg

Polk Audio Components Install:
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120514_123716.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120514_215657.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120514_194558.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120514_151905.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120518_150320.jpg

Broke 4 hole saws drilling hole for wires for left pillar and only went through 1 for the right... Figures.

andale927
06-28-2012, 06:10 PM
Also got the alternator installed today... It was a pain getting to the pulley tensioner on my car. Had to go to my friends garage to use a lift. If only Nissan would have given me about 5mm more clearance...

****...

http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120523_131131.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120523_131131.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120523_131155.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120524_142037.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120524_142333.jpg

SonicHD
06-28-2012, 07:47 PM
Can't wait to see what you do with those D1's. ;) Subscribed

RangerDangerV2
06-28-2012, 07:53 PM
nice equipment... pretty close to what I have...

GAMEOVERCCA
06-28-2012, 08:20 PM
looking good.. lots of money in this build huh?

andale927
06-28-2012, 08:27 PM
looking good.. lots of money in this build huh?

Yup! It was this or go turbo. If I wasn't a college student and this wasn't my only car things might have gone differently haha.

armykyle1
06-28-2012, 11:47 PM
Nice work so far!

jsluss17
06-28-2012, 11:50 PM
is the aq really that underrated? i've always wanted to know how much my aq1200 really puts out



edit: oh awk i've never actually looked at the specs

andale927
06-29-2012, 04:09 PM
Well got the intake installed and holes drilled and XS D3400 installed. Wiring looks messy but it is all soldered and secured. I had to ghetto-rig the positive terminal...

http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120527_190224.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120527_203841.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120527_203900.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120528_090800.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120528_091125.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120528_095932.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120528_120516.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120528_210301.jpg
http://i1164.photobucket.com/albums/q571/2011chitsazzadeha/20120528_210327.jpg

Kangaroux
06-29-2012, 04:26 PM
Are those mayhems dual 1 or .7?

andale927
06-29-2012, 05:56 PM
Are those mayhems dual 1 or .7?

They are dual .7

jaeguerra909
08-05-2012, 05:48 AM
They are dual .7

lol dual .7=.9-1 ohm hate how coils read hi all the time i wanted a .7 when i got mine not knowing they read high :[

TaylorFade
08-05-2012, 08:00 AM
Slick build. Pic of car?

How are you planning to orient the subs?

05fronty
08-05-2012, 08:11 AM
i'd still turbo it. 2.5 needs more powah

pickup1
08-05-2012, 08:54 AM
Nice blue tape on the bat.terminals...

psych0ticnemes1
08-05-2012, 09:13 AM
Did that battery fit in your stock location or did you have to modify it?

andale927
08-05-2012, 03:16 PM
Did that battery fit in your stock location or did you have to modify it?

It fit in the location but one side of my hood sits kind of high... lol

SpecV
08-09-2012, 08:18 AM
How much did that Alt cost you? I have a 2006 and if I add any more power I am going to need one. and the 2.5 will surprise most people TQ>HP :)

mazdakid
08-09-2012, 08:24 AM
How much did that Alt cost you? I have a 2006 and if I add any more power I am going to need one. and the 2.5 will surprise most people TQ>HP :)
The gf has a 06 w the 2.5, thing will smoke my civic lol

05fronty
10-30-2012, 01:53 PM
lol how much was the alt? just got one

Dirtrider4eva
10-30-2012, 02:13 PM
i'd still turbo it. 2.5 needs more powah
cant turbo the QR25de much without building the motor like hell.

How much did that Alt cost you? I have a 2006 and if I add any more power I am going to need one. and the 2.5 will surprise most people TQ>HP :)

torque ftw. :)