PDA

View Full Version : box for me gusta 12...



RangerDangerV2
06-16-2012, 03:33 AM
26533550

2.5 cu ft
48 sq inches of port tuned to 39hz...
slightly kerfed port.
gonna see how high we can meter with this bish on the saz...

Moble Enclosurs
06-16-2012, 09:26 AM
Niiiice. It looks "loaded" :suave:

RangerDangerV2
06-16-2012, 10:29 AM
Niiiice. It looks "loaded" :suave:

wut?

Kangaroux
06-16-2012, 10:32 AM
Make your port "zig-zag" vs. doing an L-port. L-port's are good when you can fit the sub right behind the port but when the port and the sub are on two different sides of the box a port that just goes up and then down and then up etc. works best. On that box design you might find that the sub will load off right into the port and not really use up much of the space that is where the L-port is (if that makes any sense lol)

RangerDangerV2
06-16-2012, 10:33 AM
Make your port "zig-zag" vs. doing an L-port. L-port's are good when you can fit the sub right behind the port but when the port and the sub are on two different sides of the box a port that just goes up and then down and then up etc. works best. On that box design you might find that the sub will load off right into the port and not really use up much of the space that is where the L-port is (if that makes any sense lol)

thanks will do.

Kangaroux
06-16-2012, 10:38 AM
You do an L-port when your box setup is like this:
http://i.imgur.com/dSE66.jpg

And you do a zig-zag when it's like this:
http://i.imgur.com/NVZ6w.png

RangerDangerV2
06-16-2012, 11:03 AM
http://i1161.photobucket.com/albums/q513/bumpin101/megusta12box.png

now tuned to 35hz. in 2.5 cu ft.

---------- Post added at 11:03 AM ---------- Previous post was at 11:02 AM ----------


You do an L-port when your box setup is like this:
http://i.imgur.com/dSE66.jpg

And you do a zig-zag when it's like this:
http://i.imgur.com/NVZ6w.png

thanks for the info!

RangerDangerV2
06-16-2012, 11:46 AM
what do yall think... gonna be a daily groundpounder but I want her to be loud... gonna try for a 45-47 on music...

Moble Enclosurs
06-16-2012, 04:58 PM
wut?

exactly......lol

---------- Post added at 04:58 PM ---------- Previous post was at 04:58 PM ----------


Niiiice. It looks "loaded" :suave:

acoustical joke....sorry

Moble Enclosurs
06-16-2012, 05:00 PM
what do yall think... gonna be a daily groundpounder but I want her to be loud... gonna try for a 45-47 on music...

Looks sick man! Keep us updated! I personally do not like using zigzag port style due to the added resonances and pressure build up in the corners, EVEN IF they are 45'ed. To many turned can cause issues especially in the higher frequency range. For numbers though, this is less of an issue. Just a thought.

05trailblazer
06-16-2012, 05:01 PM
lol you left him :confused: ^^

Moble Enclosurs
06-16-2012, 05:02 PM
lol you left him :confused: ^^

AND...probably a few others :D

05trailblazer
06-16-2012, 05:27 PM
AND...probably a few others :D
lol definetly. the last L port i had wasnt very efficient as we all know they aren't.

Moble Enclosurs
06-16-2012, 05:30 PM
lol definetly. the last L port i had wasnt very efficient as we all know they aren't.

That's because I didn't design it lol j/k. But yea, a lot of people tend to make them too small to account for low end. The one above looks adequate though for whats going in it :D.

05trailblazer
06-16-2012, 05:39 PM
That's because I didn't design it lol j/k. But yea, a lot of people tend to make them too small to account for low end. The one above looks adequate though for whats going in it :D.

yup thats how mine was :) one of the subs didnt unload well and died :(

RangerDangerV2
06-17-2012, 03:12 PM
Looks sick man! Keep us updated! I personally do not like using zigzag port style due to the added resonances and pressure build up in the corners, EVEN IF they are 45'ed. To many turned can cause issues especially in the higher frequency range. For numbers though, this is less of an issue. Just a thought.

thanks bro... im gonna push that treo to her limits.

Moble Enclosurs
06-18-2012, 07:46 PM
Anytime man :D

Imtjnotu
06-18-2012, 07:49 PM
You do an L-port when your box setup is like this:
http://i.imgur.com/dSE66.jpg

And you do a zig-zag when it's like this:
http://i.imgur.com/NVZ6w.pngtop box design is mine